Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Alois Specht

KAZUMA 500 JAGUAR the rear diff is permanently locked

Recommended Posts

Hi there , have a KAZUMA 500 JAGUAR the rear diff is permanently locked , how can I get it out of lock just about tried everything I think, ?? .  Thank you your help is appreciated.

 

Share this post


Link to post
Share on other sites


Have you tried going in reverse and then forward on a flat surface? They usually get out of diff lock when moving.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By derick geisendorfer
      I found a black rubber hose hanging down from the front of my Sportsman 850.  I'm trying to see if it's the diff vent hose, or something else and if it's something else, what it's supposed to attach to...  
    • By Kevin Nicoll
      Anyone familiar with these models? Its a new to me quad, picked it up for basically nothing... Just time and materials now, this looks expensive. 




    • By caperwing
      The rear brakes on this are hydraulic and manual. The hydraulic part is all messed up so I disconnected it all and want to go just manual on the rear. I got it all put back together but doesn't seem to work to well, like not enough pressure. The manual says I should mark the casing before taking it apart which I didn't read until to late. Any ideas? I put new brake pads on.
    • By 06kfx440
      So I’ve rebuilt this quad and the only issue is fuel delivery. The filter fills up then runs out of fuel then dies. I’m thinking that vapor lock is the cause. And here’s my reasoning. The fuel lines are supposed to be 3/8 are 5/16 on there and it looks to have a huge filter on there. I did blow out all the lines and checked the petcock as well as the screens in the tank. Sonic cleaned the carb and replaced all the jets and needle. Blew out the vent lines too. Any one else have thought?
       
       
      Sent from my iPhone using Tapatalk
    • By Jeff011366
      Hello,
        Over the years I have always used a friends machine, and only ride a few times a year. Last week I purchased a 2002 Polaris Sportsman 700. The front diff needs a rebuild, the axles are very loose where they go into diff. My question is, both front wheels rotate forward by hand, but do not rotate the opposite direction. Is this "NORMAL OPERATION" I plan on rebuilding the hubs at the same time as the diff.....
       
        My question about the rear diff, it rolls as if the machine has a total POSI rear axle...……. I lifted the front end off the garage floor with overhead hoist, as I moved it sideways the rear tires skidded rather than rotate. Both would roll forward easy, but not go in a circle. When I drove the machine in the garage making a tight turn I could feel the binding and skidding of rear tires....  Even if the switch was in 4 wheel drive, when it's hanging in te air the ignition is off...….. with the machine in 2 wheel drive mode, is that HONESTLY 1 wheel drive to allow turning without tearing up the lawn? then it locks the rear axle once it's put into 4 wheel drive? I'm guessing the rear diff needs a rebuild also because there is something "BALLED UP" internally locking the rear wheels together?
        It's a old machine that was not maintained, I thought the wheels were all rusted, but it was 17 years off baked on red clay. Just wanting to make it a reliable machine. I have great mechanical ability, just lacking a little knowledge of what is suppose to be "NORMAL OPERATING STANDARDS"
       
      Thank you in advance for sharing your knowledge.
      Jeff
  • Similar Tagged Content

    • By mrfartsalot
      i have a 2001 suzuki quadmaster 500 4x4 that the primary cvt clutch is rusted on any ideas on how to get it off i want to try to reuse it if possible.
    • By Kevin Hendrix
      I have 2013 kazuma ATV vin# LWOXCFT/650074253 trying find out any info i can
    • By Paul Maple
      I have a 1999 Sportsman  500, it was running fine, than started to lose power in the winter, I adjusted the idle screw and away I went, than a few weeks ago it died, I have found that i am flooding the engine, compression was at 70PSI and due to the compression release mech. i assume i am good as it compared to the same PSI on a 2000 sportsman 500 i have. i cannot start the atv unless i go full throttle and it starts an runs for about 30 sec than dies, again it is flooded. i ordered a new carb off ebay as i could get one for around $40. put that in same issue, i have checked the timing, (good), valves out of adjustment i adjusted to .006 still same issue, i have found the exhaust lobe and rocker arm to have some wear, i have ordered new ones, but am looking for any other input in this area as well. would the exhaust cam and rocker arm cause the engine to flood? i have used a bore scope and the piston liner has good cross hatching still? any input would be great.
    • By artis allen
      I bought a Kazuma Cougar 250 from a guy who used to fix ATV's but wanted to get rid of all his machines because he's "too old" and wants to quit fixing them, from what he says.  anyway,  One of the machines I bought was this Kazuma which I can't find any parts for it, or very little parts.  I found one website that still sells parts, which I'm thankful.  For the internal parts, I had to refer to the Honda Rebel 250 for parts.  I had to buy 2 new pistons and gasket set and I couldnt find the parts so I did some research and found that alot of the parts are similiar so I ordered it and it was a match.  I also used the manual for the Honda Rebel/Nighthawk and use this information to disassemble and assemble the motor.  Very helpful for anyone who has one of these things.  If anyone has more info on these things, please feel free to post.
    • By Knave
      Kazuma Falcon 150 First successful start after several years of employment.
      She was relieved to find that nothing was connected, everything was cut off, incomplete. No pipes or pipes, parts are missing $ 175!There was hardly a screw, the fasteners had plastic fasteners! 
      Kazuma Falcon 150.mp4
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...