Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

mrfartsalot

1986 yamaha moto 4 200 rebuild

Recommended Posts



The best way to find that out is to look up the part number for the cylinder for each bike and see if the number is the same.  

I looked up the part number for the 200 and 225 and it was the same so it could work. But keep in mind that all shit rolls downhill when you upsize it’s re-jet for the carburetor, exhaust may be tight with too much back pressure, so you can’t just go with a bigger piston and think your going to be ok.  I would prob go the route of boring the existing cylinder and re-jet the carburetor in accordance with the bore and piston size.  As far as exhaust goes after that it would be a matter of changing the silencer/baffle. 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By StolenATV
      On Wednesday, September 18, our ATV was stolen from in front of our house after the locks were cut. This was around 2-3:15 AM.
      We realize the likelihood of ever finding the four-wheeler again is slim to none, but we had to try and put the word out there. We have put countless hours in to restoring this Banshee. It was more than just a passion project, it also was our investment for a down payment for our future house. We are devastated and beyond heart-broken. If you see any suspicious postings on Facebook Marketplace, Letgo, Craigslist, etc., or have any other information, please contact us or the Prince William County PD.
      *Update* We received a tip last night that it was possibly posted on Facebook Marketplace around 8AM yesterday morning with only pictures of the front and of the back of the ATV. The description only said: PM for more details. This came up in someone’s FB Marketplace feed that has it set for a 50 mile radius from Hartwood, VA. She also has her feed set to automatically translate everything into Spanish, so It could also possibly be posted in Spanish.
      WHAT WAS STOLEN:
      2004 Yamaha Banshee YFZ 350
      White plastics with bright green and pink graphics/stickers
      STOLEN FROM:
      Prince William County, Triangle, Virginia
      $500 REWARD FOR INFORMATION LEADING TO RECOVERY. BONUS FOR CONVICTION.
      The post Stolen From Our Front Porch – 2004 Yamaha Banshee YFZ 350 appeared first on STOLEN 911.
      View the full article
    • By J Printz
      i have a 2004 Yamaha Kodiak 450 and it is losing oil but does not smoke what is it
    • By Chase Cook
      I have a 2001 yamaha yfm350x and it has a brand new top end, new carburetor (stopped the leaking problem and is now getting gas to it), new CDI box, new stator, handlebar switches work, off-and-on switch works, new starter solenoid (works), new neutral relay (works), ordered a new Rectifier on its way, good strong blue spark. Has compression, valves are right. Timings is right and is TDC. When I try to start it it just makes a loud popping noise like its backfiring but it's not because its not running when I push the throttle all the way and when i barly push the throttle it try to start but won't, so I'm trying to figure out what could be the problem not starting now, Getting very fustrated with this thing and put some work and money into it and it's not still not working. This is the only atv I ever had that I can not figure out the problem to get running. Need help please..
    • By Chase Cook
      I have a Yamaha 350 in at once to try to fire up but won't. It's getting gas fire air and it has a lot of compression but still struggles to start check the timing it's top dead center valves are good valves are adjusted everything's working but won't fire I put my hand over the carb suck in gas and it tries to but it makes a lot of black smoke. Also when I put my hand over do you carb and tried to start it there's black black nasty stuff in the gas. So I don't know if it's trying to burn too much or what it is the gas tank clean and it anything to do with the gas it's with it firing. Took the spark plug out and it's pure black. What is dried up black not nasty corroded wet looking. Need help to solve the issue
    • By Colby Calk
      I recently got a 98 warrior 350 that 'needed the carb adjusted' but the reality is it has no spark. I have a new spark plug, plug wire, ignition coil, battery, and cdi box. I checked continuity and took apart and inspected the starter/kill/light switch on the handle bar, and it all looks brand new and checked out. The key switch seems to be working properly, as when off, nothing works, but when switched on, lights and electric starter button work. It turns over fine, and as I just stated, all the lights work. I took all the plastics off and traced all the wires, and only one had a small cut in it, but it was only through the rubber sheathing, not the wire itself (the blue one coming from the stator). I cleaned some grounds, made sure both relays work, and still nothing. I pulled the stator cover and looked at the stator itself, and it looks great. No broken wires or connectors or anything. Still, no spark. I'm at a loss. Where do I go next? Any help is appreciated.
  • Similar Tagged Content

    • By ATVNetwork
      Introducing the 2020 Yamaha XT-R editions of ATV and Side-by-Side vehicles featuring exclusive XT-R features like a factory-installed Warn Winch, advanced suspension, special-edition paint and color-matched wheels with extreme terrain tires, all Assembled in the USA for unmatched Proven Off-Road capability, comfort, and confidence. 
      YXZ1000R SS XT-R: https://yamaha.us/yYXZXTR 
      Wolverine X2 XT-R: https://yamaha.us/yX2RSXTR
      Wolverine X4 XT-R: https://yamaha.us/yX4XTR
      Grizzly EPS XT-R: https://yamaha.us/yGrizXTR
       
       
    • By ATVNetwork
      Introducing the 2020 Yamaha XT-R editions of ATV and Side-by-Side vehicles featuring exclusive XT-R features like a factory-installed Warn Winch, advanced suspension, special-edition paint and color-matched wheels with extreme terrain tires, all Assembled in the USA for unmatched Proven Off-Road capability, comfort, and confidence. 
      YXZ1000R SS XT-R: https://yamaha.us/yYXZXTR 
      Wolverine X2 XT-R: https://yamaha.us/yX2RSXTR
      Wolverine X4 XT-R: https://yamaha.us/yX4XTR
      Grizzly EPS XT-R: https://yamaha.us/yGrizXTR
       
       

      View full post
    • By W8st3rn Ave.
      Quad Yamaha YFZ 450 exploring through woods on dirt trails in Prichard Alabama
       
    • By wHarmon
      Our 1988 Yamaha Terra Pro is finally seeing the finish line of becoming our new bush hogging tractor! I've had the terra pro for almost 2 years... we had great intentions, but after removing the fenders, fuel tank, and the carb, we let it sit up. Shame on us! However, the terra pro is cranking today. We cleaned the carb, figured out what goes where and where did that screw go! She smokes like there's no tomorrow, but that's okay! The only issue right now is getting all these lines hooked back up to the carb right! There is 5 lines to hook up to this thing!! And in our moment of drinking and removing parts, we cant remember how they go back on. I've found several diagrams online, but none showing the overall schematics of all the lines! If anyone has a service manual, or any way of helping us figure out what goes where I would really appreciate it!! I can attach pictures later if it'll help!
    • By jim estes
      Got this terrapro recently. Has slight damage on left front fender-traight otherwise. Low hours-no smoke-runs excellent!! Finish mower comes with it. Mower has no issues. asking $1600. Always open to partia; trades. This is a neat machine that starts runs and drives very well!  If your interested shoot me a message  




  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...