Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

orvilleortiz538

No spark Lifan 110cc China atv

Recommended Posts

I have a 110cc Chinese atv,the harness is in good shape,I recently bought a new stator,coil,CDI,spark plug,came as a kit from Ebay,and I still have no spark,I've watched a few videos from YouTube tried the same steps,but still no spark.... ???? Bad Flywheel??? I heard is very rare for them to go bad,(the magnets in them) I'm gonna check the harness very good again!!! I just can't get spark!!! Any suggestions Please!!!!

Share this post


Link to post
Share on other sites


Ignition switch? Run/kill switch on the handlebar? Is there a place for a safety switch like on kids atv where it has to be in place to run?

Share this post


Link to post
Share on other sites
Ignition switch? Run/kill switch on the handlebar? Is there a place for a safety switch like on kids atv where it has to be in place to run?
Ignition is new,on/off start/kill switch is all new and I made sure everything was correct,

Sent from my SM-N950U1 using Tapatalk

Share this post


Link to post
Share on other sites

I'm curious, why did you throw so many parts at it?  Were they missing or did you just replace all of it trying to nail down the cause of no spark?

On a side note, sometimes cheap ebay parts can be bad out of the box.  I had a bad spark plug boot once.  It's worth either doing a continuity test on the boot or just take the boot off and see if you can get spark from the wire itself without the boot.

Share this post


Link to post
Share on other sites
I'm curious, why did you throw so many parts at it?  Were they missing or did you just replace all of it trying to nail down the cause of no spark?
On a side note, sometimes cheap ebay parts can be bad out of the box.  I had a bad spark plug boot once.  It's worth either doing a continuity test on the boot or just take the boot off and see if you can get spark from the wire itself without the boot.
I have 6 Atv total,3 are Chinese quads,so I used some of the other parts on it,but I did order the stator kit I mentioned above,I have 2 extra wire harnesses so I may tmgo that route.... but I dont buy stuff I dont need,and I do use Ebay very much for parts like you said

Sent from my SM-N950U1 using Tapatalk

Share this post


Link to post
Share on other sites


Sounds like you're chasing a pretty tough issue.  Could very well be a broken wire somewhere in the harness, looks like it's worth a shot trying a different harness. You're moving in the right direction.

Share this post


Link to post
Share on other sites
Sounds like you're chasing a pretty tough issue.  Could very well be a broken wire somewhere in the harness, looks like it's worth a shot trying a different harness. You're moving in the right direction.
Yes I'm gonna open up the wire Harness and trace all the wires and check if there's anything split inside,but now let me ask you these also have that woodruff key correct? Or that doesn't affect it? I also have other flywheels from other ATV's,I just don't have to much time to play with these because I'm a handyman so I'm constantly busy working on people's houses or some businesses...thanks for the help though!!!!

Sent from my SM-N950U1 using Tapatalk

Share this post


Link to post
Share on other sites
Sounds like you're chasing a pretty tough issue.  Could very well be a broken wire somewhere in the harness, looks like it's worth a shot trying a different harness. You're moving in the right direction.
Hey all along was the wiring harness and the new stator I bought from Ebay,I had a 6 pole stator inside a box along with other parts and decided to give it a try and BOOM!!!! it started right up!!!! $20 ATV 240a1ecae07f6c221e5455b1bf05cb87.jpg1705db9bd3f91930a24c2a82f7f53871.jpg68817a3b990d8f5848a65ab28d826013.jpg

Sent from my SM-N950U1 using Tapatalk

Share this post


Link to post
Share on other sites

That's awesome, congrats on bringing it back to life! Its amazing how it fires right off once everything is in line. 

Share this post


Link to post
Share on other sites
That's awesome, congrats on bringing it back to life! Its amazing how it fires right off once everything is in line. 
You called it though,you said Chinese parts often come bad,non working properly,good call bro!!!bad new stator but I sent a message and it's getting replaced

Sent from my SM-N950U1 using Tapatalk

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Chris2018
      I have a 1996 Kawasaki Mojave KSF250. I have no manual on it and it has a no spark issue. If anyone could give me a hand with this or would possibly have a manual would appreciate it. 
    • By John Dunn III
      Just bought a LT 230 anything I should watch for. It runs and drive good. Just don't want no surprises 
    • By james p
      Hey all new member so I'm sorry if this isn't the correct place to post, but I'm having trouble with a 2000 polaris magnum 500 I just acquired. The quad ran when I got it but was having problems that sounded like the camshaft, and sure enough camshaft lobe was pretty much gone, so we replaced the camshaft and exhaust rockers and now the quad doesnt have spark. We had the quad running right before we tore the old camshaft out and now no spark. Anybody else ever have a problem similar? We've been checking for loose wires, checked grounds, and double checked timing but cant get it figured out so any advice would be appreciated! Thanks 
    • By Gary Ferguson
      My old Big Bear nearly left me stranded but I managed to limp back to my garage just before it died. Now No Spark. I’ve changed the obvious, inexpensive and easy parts- spark plug & coil without any luck. 
      Ive stripped it down and traced all of the related wiring, checking as many connections as I can but no luck again. 
      Next I pulled the cover and accessed the stator housing to inspect and do some resistance testing to ID a possible short. 
      Here are my readings:
      Source coil- 325 ohms
      Pickup coil- 225
      Can anyone tell me if these are good numbers, and if good, where to go next?
      I assume my next purchase will either be a new stator or CDI, but since neither of these tend to be returnable items I want to be as sure as I can I’m gonna get a resolution to the problem!!
      Thanks,
      Gary in SC
    • By Ed Maki
      I have a 2004 kymco mongoose 50 two stroke and it was a mess and it didnt run when I got it. There was practically no wiring harness and all of the wires that were there were electrical taped together. Long story short I ordered a aftermarket wiring harness (Complete Wiring Harness Electrics Wire Loom Kit CDI Rectifier Ignition Coil Magneto Stator For GY6) installed it and now I have no spark. Any ideas or help would be greatly appreciated.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...