Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Jeremy Murray

Suzuki King Quad 300 Starting Problems

Recommended Posts

My 300 king quad will crank and crank off the start button but will not start but you can pull the pull rope a few times and it will start help me

Share this post


Link to post
Share on other sites


Pull start it, and check battery voltage across terminals at idle and revved up.  If voltage does not go above battery's idling voltage, then I would start with the rectifier/regulator, then check stator/generator continuity.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By thegipper
      Have replaced, Carb, fuel pump, CDI, plug, coil,fuel filter. Will crank but not srt. Getting spark and battery is fully charged 12.6V
      Any suggestions????
       
      Thanks
    • By Cj Winds
      I have a 2000 Polaris Xplorer with the 250 two stroke motor
      It does not want to start with the electric start, the motor cranks fast, the battery is good, and there is good spark when cranking. The engine starts perfect when using the pull cord, it even starts if I pull the cord slowly and starts with one pull. The engine idles smoothly once started. My wife says she needs the electric start to work.
       
    • By Laval
      My son’s 17 Alterra 500 just quit today. It was running fine the started stalling and bogging at half throttle. It finally stalled and will not start. The bike was won in a raffle last year. It had sat for a year before he won it. Has ridden it very little since.  It has 180 km on it. We checked  the plug spark seems strong  disconnected the fuel line at the pump and the fuel pump is working well.  Disconnected the injector and it is spraying fuel.  Air filter is clean and there are no mouse nests in the air intake.  Al fuses checked and good. Ideas?
        
    • By crochet homemade
      I have bought a 1996 suzuki king quad 300 and I have noticed that it smokes but I have put oil in it and plenty of gas had to fix shifter bc the nuts and bolts came out somewhere. I have had to replace the wire for the starter but now when I try to start it it wont idle at all and when it does run it smokes really bad like a whitish blue I guess, and it likes to stall a lot. So anybody can help me out please and thank you

      10000000_310855426253462_714534016610467840_n.mp4
    • By Andrzej Polak
      hi
      Where installing a winch to KINGQUAD ltf300?? someone have any pic?
  • Similar Tagged Content

    • By My kiwi shed
      Hi there everyone. Just seeing if there is advice on a problem I have before I start digging too deep. 
      I recently bought this creally nice 2004 King quad ltf300 with only 2400km..
      Everything things works great except when engaged into 4wd or diff lock it has a clicking noise ( sounds like broken teeth etc) are the front diffs known to blow?  Or the transfer from engine?
      I am yet to test on some loose ground to see if I'm getting drive at front .
      I will be driving in to find problem in next few weeks but thought I'd see if anyone might know what it is first. Cheers


    • By Shawn Hurt
      I have a 2013 KQ I bought it new but rolled it a few years ago. I have replaced the left lower A-arm and left tie rod, the steering is still a little sketchy as I just eye balled the alignment. But the major issue is the left front tire cambers out at the top and has wore the tire bald. Tires have about 2000 miles on them but other 3 are half tread and left front is a slick.. I can not see anything else bent and don't know what to do..  
    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
    • By Ben Lennon
      Hi guys new to this forum and thought I’d jump on as I’ve just bought my first quad a Kawasaki bayou klf300c 89 model. It had starting issues when I bought it so I’ve gone thru and replaced the cdi, voltage regulator and starter solenoid aswell as rebuilt the starter motor after all this it was still free spinning on electric start so I pulled the stator cover off to find the fly wheel wasn’t spinning so replaced the one way clutch bearing put it all back together and still not engaging at all. I’m at a loss and looking for some ideas on we’re to look next to solve the problem
      cheers Ben 👍
    • By Stacy Hanks
      I have  2000 Yamaha bear tracker 250 - igniton relay and starter relay both were replaced also the neutral switch indicator was replaced-- bike will not show light on for neutral or start when button is pushed
       
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...