Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Sp33dy0000

1999 Yamaha Grizzly 600 No Fire

Recommended Posts

Hi can someone please give me some sort of idea I have a Yamaha 600 grizzly four-wheel-drive I have put a new coil and a new stater and Pulse stater on it with new plug and steel can’t get any fire

Share this post


Link to post
Share on other sites


What made you change all them parts without testing them first?  I’m only asking not criticizing.  Just trying to figure out why you changed all that.  It could be the cdi but there are a few variables as well. Kill switch, shorted wire, regulator/rectifier etc.  

Was the bike running before ? Did you get the bike broken ? 
let’s get a little background going on the bike and I’m sure we can help you out. 

 

  • Like 1

Share this post


Link to post
Share on other sites

Hi, i had a 400 kodiak that had a bad ignition. I ended up tearing harness apart and went through schematic, tracing wires back to short to ground from ignition switch. The switch itself seemed to work as the light came on and off with it, but when the ignition was on, it was back-feeding preventing it from getting spark.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Asen_77
      Hi All,
      My name is Asen and I am from Eastern Europe, Bulgaria. Riding a Yamaha Raptor 700R and this is my first Quad wanted for a vey long time :)

       
    • By payne
      Have an Bear Tracker 250. Dont have the manual or any literature to help with. Anyhow, starts with pull start in gear, and electric starter doesnt work. Also, neutral light doesnt come on. Where should I begin?? Need some direction on troubleshooting all this. Thanks a million.

    • By Daniel Gibson
      Have a 08 raptor brought to me a couple months ago. Got it on a trade for house remodel. Bike has around 30 hours. No that's not a typo thirty verifiable hours. The main Yamaha tech has put hands on this bike. Always Been reallyhard to start. If it does it runs really good. That's the kicker...IF! It started out intermittent now it's no spark at all. Everything ignition related is brand new. It all checks out good but still won't do it. Please help
       
    • By Admin
      Yamaha Australia has announced it will discontinue selling Utility ATVs due to new Australian government legislation that requires the mandatory fitment of so-called Operator Protective Devices (OPDs), YMA will not sell utility ATVs after the government compliance deadline of 11 October 2021.
      “The decision to make the fitment of OPDs compulsory is disappointing. The ruling has forced us to withdraw utility ATVs from the Australian market because as a manufacturer we are not willing to gamble with our customers lives by bolting untested devices onto our specifically engineered and designed ATVs,” explains YMA Director Brad Ryan.
      As the market leader in this segment, Yamaha recognises that utility ATVs are an important part of farm operations and will comply with stage one of the new consumer legislation. This includes testing and the fitment of warning labels by Oct 2020. This will ensure that Yamaha ATVs remain available until October 2021.
      After this date customers will not be able to purchase a new Yamaha utility ATV in Australia – but sport and youth models will continue to be available. This is because new sport and fun ATVs do not need to be fitted with OPDs. In addition, side-by-side vehicles (SSVs) are not affected by this ruling, so YMA will support our utility ATV dealers and ease the transition from ATV to AG bike and SSV business.
      “Fortunately, our utility ATV customers can transition to our equally capable lineup of AG bikes and expanding SSV range,” adds YMA Director Brad Ryan.
      Customer safety has always been our priority. YMA has provided market leading rider training and promoted proven safety methods. YMA also helped develop the Shark ATV helmet which is the only fully certified farm safe ATV helmet available. YMA feels so strongly about customer safety that purchasers of new Yamaha utility vehicles will receive a free Shark farm safe helmet valued at $250 while stocks last.
      YMA is also fully committed to customer care via a national dealer network that will continue to service ATVs and with the supply of parts and accessories into the future.
      Source: https://www.dirtaction.com.au/yma-to-discontinue-utility-atvs/
  • Similar Tagged Content

    • By Ajmboy
      Here are my 2004 Yamaha Grizzly photo albums if anyone is interested in checking out. 😎
       
    • By Ajmboy
      Took the power washer and cleaner up the grizzly a bit.
    • By YamahaGrizzly
      not sure where to post this but,
       
      I have a 2016 yamaha grizzly 700 with a blown up transmission (again).
       
      I was wondering if a 2015 Yamaha grizzly 700 Main drive transmission shaft and gears shift drum will fit on my 2016?
    • By David Cameron
      The small waterline insert for the hose that goes from the water pump cover to the thermostat housing has corroded off. I only need the insert on top and behind the thermostat housing that the hose goes over and can't find just the insert. It looks like it may be pressed in. I've have been told the entire motor housing needs to be replaced. The pic with the red line indicates where the hose and insert would be and the insert looks like the pic of the water pump  Any ideas would be really appreciated.
       
       



  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...