Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By Resurgence Small Engine Inc.
In this video, Jonathan diagnoses & repairs the decompression system on a Yamaha 2003 Grizzly 660.
Some symptoms include: Pulling recoil right out of your hand, starter turning really slowly, constant dead batteries.
Thanks for watching!
By crochet homemade
I have bought a 1996 suzuki king quad 300 and I have noticed that it smokes but I have put oil in it and plenty of gas had to fix shifter bc the nuts and bolts came out somewhere. I have had to replace the wire for the starter but now when I try to start it it wont idle at all and when it does run it smokes really bad like a whitish blue I guess, and it likes to stall a lot. So anybody can help me out please and thank you
The 2019 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, headed to Sunset Ridge MX in Walnut, Illinois for the sixth AMA Pro round and fifth amateur ATVMX round.
View the full article
By Dee Wilson
The short of it: I'm getting a single click when I hit the start, and nothing else.
The long: I'm a new owner to a 94 Timberwolf. I inherited it with the understanding that it needed a battery. It started without the battery when jumped, so I know it does work. I got the appropriate battery, charged it, and its reading 12.7V. Installed it, and all I'm getting is that click. Cleaned the carburetor today and reinstalled under someones advice, but still nothing. I'm gonna take the battery in to autozone to get it checked, and I was going to head to the spark plug next. But like I say, I'm new to this. Thanks for any and all advice.
Just curious if anyone is making their home "smart" in terms of plugs, outlets, switches, cameras, alexa, google, etc. I've got a few things going and just installed some smart switches. I'm pretty happy with the overall setup and got everything on amazon. Here' what I have:
Indoor and Outdoor Zmodo camera pack $75. Bought 2 of these and run them through the meshare or zmodo app. I want to get teh NVR setup and find that these cameras work pretty well.
Zmodo Greet Pro Video Doorbell $165
TP-Link 3 Dimmer Switch pack $99.99 when on sale controlled through Kasa App
TP-Link 3 smart switch pack $79.99 when on sale controlled through Kasa App
TP-Link smart bulb x2 for $20 each
TP-Link smart plug $17
Nest e learning thermostats 2 of them $169 each but got them on black friday for $120, have to use nest app
Amazon echo dot 2nd generation, 2 of these.
I also have a couple of fire tv sticks 4k
I also have an apple tv and a chromecast I don't use.
Similar Tagged Content
I know the piston has to be at TDC, but there is no marks on the cam gear. i kinda figured that when the one bolt is up the cam lobes are down, not touching the rocker arms. i want to know if this is how to do it? someone give me an answer.
I thought I would make a quick "How-to" on setting wheel alignment since I was flipping my tie rod ends and I was going to have to re-align the wheels anyways.
Here's some of the tools you will need...
1.) Start with the ATV on a smooth and level surface, like a cement garage floor or driveway.
2.)Center up (Eyeball It) the handle bars and lock them into place with 2 ratchet straps, one on each side of handle bars. This of course prevents them from moving when your adjusting the tie-rods.
3.) Place two Jack Stands approximately 2 feet in front of the atv even with the outside edge of the two front wheels.
4.) Wrap a length of string all the way around the ATV and Jack Stands, Start and end at the rear hitch. Make sure the string is the same height from the ground on all 4 wheels. I like to attach a few elastic bands to both ends of the string before attaching the string to the hitch. This makes it easier to adjust the strings when moving the Jack Stands.
4.) Break lose the inner and outer tie-rod nuts. NOTE! Make sure you use 2 wrenches, one on the nut and one on the ball joint. Damage can occur by only using one wrench.
5.) Adjust the string by moving the Jack Stands in or out untill the string just touches both of the side surfaces of the rear tires on each side of the ATV. This will take some time to get it right but it needs to be done!
Check manufacturers wheel alignment specifications on your specific make and model before you adjust any components.
For this wheel alignment I'm using the Polaris Specs which seems to be a common setting.
Polaris - The recommended toe alignment is 1/8″ to 1/4″ toe out. This is a total amount, not per wheel.
6.) On the front rim, measure the distance from the string to the rim at the front and rear edges of the rim. The rear measurement should be 1/16″ - 1/8″ (.2 to .3 cm) more than the front measurement.
7.) If an adjustment is necessary, Turn the tie rod itself with a wrench or your hand in small increments. It doesn't take much to move the tire a long way, so go slow. Keep re-checking your measurement's until you have a 1/16″ - 1/8″ differance to the string.
6.) Once your satisfied that you have the correct "Toe Out" measurements you can tighten up the inner and outter tie-rod nuts on both sides. AGAIN...make sure to use 2 wrenches.
7.) Now take your ATV for a test drive to test your adjustments. If it still pulls one way or the other, just repeat the above steps to tweek the adjustments again utill your happy.
The whole process only takes about 15-20 min.
So a few weeks ago I had an extremely nasty crash during practice. I completely separated my shoulder. Stage 3 separation, the worst you can do without tearing muscle too. This thing will not heal itself, on March 17th I will be getting surgery to repair my shoulder...
Just wanted to share the news.
Here is what i did.
Type III shoulder separation
Recently Browsing 0 members
No registered users viewing this page.