Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

motorcycle tires problem


Julio Cano
 Share

Recommended Posts

The tires which I bought on ebay cannot be balanced, it’s out of round.Tried riding and had wobble. 
It was mounted in shop and they also put it on a rim they had sitting in the shop and same issue to confirm it.
Are they defective ?
They have brand new high quality tires for my  old suzuki gsxr750 and want about $600 for two tires.
Is it worth it to pay that much or buy another set of front rear tires like Hexautoparts which has good reviews on trustpilot.com?
Any recommendations ?
Thank you.

Link to comment
Share on other sites



On 2/20/2020 at 10:31 PM, Julio Cano said:

The tires which I bought on ebay cannot be balanced, it’s out of round.Tried riding and had wobble. 
It was mounted in shop and they also put it on a rim they had sitting in the shop and same issue to confirm it.
Are they defective ?
They have brand new high quality tires for my  old suzuki gsxr750 and want about $600 for two tires.
Is it worth it to pay that much or buy another set of front rear tires like Hexautoparts which has good reviews on trustpilot.com?
Any recommendations ?
Thank you.

Is this a street bike ? 

 

Link to comment
Share on other sites

You could have just gotten a bad run of tires off the line.  It happens but the question is how many tires were made before they picked up on a production problem? 
Have you reached out to the vendor or checked any complaint reviews etc? 

I feel that one item you should never try to go cheap on  (especially street bikes) are the tires.   Its what the bike rides on and your life depends on when it comes to traction and stability.   

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Tagged Content

    • By Wagnerc
      Are the tires on Amazon worth getting? Wanda and Kenda are two I was looking at
    • By Harold Wallace
      TIME FOR NEW TIRES! LOOKING TO BUY NEW TIRES 28X9X14 AND 28X11X14 SOMETHING OTHER THE "ZILLAS". WHAT HAS ANYONE TRIED ON THIS MACHINE?

    • By GrizzlyRider
      It's been a while since I looked around at buying ATV tires, so just wondering where everyone is buying their ATV tires from these days? Do you just go to the dealer or do you order them online somewhere? If you get them online, who do you buy from and did you mount them yourself? Also please list your ATV tire brand. 👍
    • By Cody Smith
      Does anyone know the exact name of this part? Bottom of tire is tilting in Under the bike and top or tire is tilting out away from the bike. Not terrible but it’s a little 90 for kids want to make it safe. Just need to know exactly what the part is called. 



    • By marek porowski
      It’s kind of ATV related question as I need new trailer tires to tow my 4 wheeler. 
      Does anybody have any experience with loadstar 12” trailer tires ? 
      There is not to many choices for trailer tires here in Ontario and I was wandering if somebody can recommend me something. 
  • eManualOnline
  • Similar Topics

    • By Hagbard
      Gotta love Facebook Marketplace, and the crackheads that you can buy things from on there... 
       
      Naturally, I'm like "Hook up the trailer, let's go get this pile of eBay parts!" and hauled ass to this dude's house with 3 crisp Benjamins to wave under his nose. Showed up about 20 minutes early to find him and his buddy hastily reassembling the pile of plastics into a semi-presentable quad, using some real sweet bulk bin galvanized hex bolts from Tractor Supply Racing Co.
      Looked it over and handed him the three bills in exchange for a transferrable registration from 11 years ago, and a STACK of handwritten bills of sale from the last 11 years, since apparently no one has gotten it functional (for long). Average ownership period ranges from 6 months to 2 years. Fingers crossed, lads!

       
      Got it home, and hit it with a healthy dose of bike wash and the pressure washer, more bike wash, a lot of scrubbing, and more pressure washing to get years worth of crud off of it. The entire left side of the crankcase was covered in an eighth inch of caked oil mud, as though there had been a catastrophic loss of oil at some point in the past, because it was nowhere near the drain or fill holes. Totally opposite side. Managed to find the VIN hiding in there and ran it for giggles.

       
      PO mentioned that he "had it running at the beginning of the season, but it was 'rough' " and that he had cleaned the carb, but it didn't help much. And now it just plain wouldn't fire at all. Kind of threw his hands up and shrugged.  So, after cleaning it up enough to turn wrenches without looking like a Texas oilman, I took off the plastics and started poking around. Found a few fishy spots in the harness where previous attempts at repairs had been shoddily made and hidden with black tape. Sorted those out, drained and filled with fresh oil and a filter, and hooked up a battery. Turned the key, got a green light, hit the starter switch and got a little grunt and squeak out of it, then nada. No light, no nothing. Pulled out the DeOxIt D5 and started pulling apart all the connectors and giving them the business. put everything back together again, turned the key, got green light, and starter cranked! Then nothing again. Started fiddling with the wiring and connections while watching the green light, and saw a flicker when I bumped the 25A fuse holder. Gave it a squeeze, and sure enough, the light came on. Thing was full of powdered remains of spade terminals, so I installed a NOS replacement model from RADIO SHACK that had been swimming around in my toolbox for nigh a decade. Sure of my fix, I tried the starter again, and NOTHING again. More fiddling revealed that the OTHER fuse holder (15A) was the same. Homebrewed another fuse holder from spade connectors and shrink tubing, hooked it all up and everything was good.
       
      Now that I could crank it, I poured a couple cups of gas in the tank and pulled the plug to check for spark. Good blue spark, once I cleaned up the theretofore fouled plug and gapped it. Screwed it back in, with a healthy dose of ether, and gave it a crank. Not even a wheeze or a sputter. Off with the carb!
       

       
      So, I think our old friend PO has a drastically different definition of "carb cleaning" than I do. I'm thinking maybe he wiped down the OUTSIDE of the thing, and was shocked that it had little to no result. That white stuff is a combination of powdered aluminum oxide and near-varnish fuel. Has the consistency of slight dried mayonnaise or white library paste, but no pleasant wintergreen aroma to match.   A quick perusal of the Amazon bargain bin turned up a carb (BST31SS) and non-vacuum petcock for $25, with a caveat that the carb required minor modifications to fit. Four days and a lot of sandblasting and surface prep on the plastics while I waited, the carb arrived today and I drilled out the ferrules for the choke and throttle cables to accept slip-fit cables instead of thread-ins. Other than that, the only difference was a lack of one vacuum port for the petcock, which I had anticipated and purchased a regular old one with no vac diaphragm in it. Safety first, amirite?
       
      Now with definite spark, and reliable fuel delivery, I started cranking and fiddling with the idle and air screws, managed to get it to fire up - almost literally~ There was a LOT of smoke coming from near the exhaust port on the head, thought I had loose header studs for a minute, then realized it was just more of the old oil mud I had missed while cleaning, burning off between the fins on the head and the exhaust heat shield.
       
      First fire up - lots of smoke
       
      While I was changing the oil, I took the opportunity to pull off the access covers and adjust the clutch and valve lash, so I was feeling OK about running it a little more. Got the idle and mixture set a bit better and decided to test out the transmission and shifting a little.
       
      Testing reverse
       
      Realized I left the parking brake set, so it stalled out. Oops.  Another thing I did while waiting for Brown Suit Santa to bring my carb was to remove the diff lockout pin from the shifting mechanism and I wanted to see if it worked. Here's the quad, up on the lift, minus the LF wheel (due to a seized cylinder I've since replaced) with range set to HIGH, and Differential Lock engaged. Worked like a charm. Had to holler at the dog who was camped out below the rear tire  Dog under the tire. Again. I think she has a death wish. Or perhaps aspirations of being a jackstand in the pro-leagues.
       
      Testing Diff Lock in High Range
       
      Put the wheel cylinder in, (Dorman w38750 for a 1991 Geo Metro/Suzuki Swift was a precise fit and only $10) to replace this crusty POS:
       

      put the wheel and hub back together, put seat back on and fired it up. Made sure it would start again after turning it off.
       
      Long Live The King
       
      All the repairs appear to have been successful all around! I took it out for a quick rip up the street and back, needs a little bigger main jet (it came with a 145 installed, which I swapped out for the 120 OEM spec, but it feels boggy at WOT, so I'm going to experiment a little after I get the airbox back together, but 145 seems like a big jump.
       
      I'll try to post an update once I have the plastics all refinished and installed next week. Pretty sure it's going to be yellow, no camo or green bullshit for me thanks   Hope you didn't hate my post.
    • By blakegriggs81
      So my 2006 Honda 350 fm is having an issue where the neutral light doesn’t come on. I’ve shifted into neutral, checked all the fuses, the battery is good and still no neutral light comes on when I turn the key. I found the neutral safety switch connecter and hooked an alligator clip to the green and red striped wire and put the other end of the alligator clip to the negative side of the battery and nothing happens. I put an alligator clip to the gray wire and put the other end to the negative side of the battery. Nothing happens. I can put the alligator clip to the positive side of the battery and the reverse light on the dash will come on. I tried doing the green and red stripe wire to the positive side of the battery and the light doesn’t come on that way either. So neither the negative or positive side of the battery will turn the neutral light on. Only the reverse light works but only on the positive side of the battery. The ohm meter will only read continuity on the gray reverse wire. Not getting any kind of reading on the green/red wire.No continuity just a big open line reading for thegreen/red wire. Is the neutral safety switch brokeN? 
    • By Otter9099
      What battery type is best wet cell, agm or lithium? Who makes the most reliable battery for atv's? I need to replace a battery on my qtv. It had a wet cell lead acid. What doe you recomend for a replacement battery that is not a fortune and that is reliable?
    • By auditorguy
      My sportsman 800 needs new tires.  Any suggestions for off field and trail riding?  type of tire and or good vendor for them?
    • By Otter9099
      I have a 1996 Suzuki Quad Runner 250 LT-4WD. What tools should keep on the atv at all times incase of break down for a trail fix? Share what you carry and share pictures if you can.
       
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...