Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

Alright folks i decided to finally start a thread with some pictures from when i first got the quad, to where its at now in the rebuild process. I will add more and more pics as they come. Here it goes so far.....

When he first came home

misc_009.jpg

misc_012.jpg

Tearing him down

misc_024.jpg

Frame Prepped and primer ready

quad_002_Medium_.jpg

Primed the frame :o)

quad_003_Medium_.jpg

Primered and ready to paint

misc_002_Medium_.jpg

The newly painted foot pegs metallic black

quad_004_Medium_.jpg

Fresh paint on the heal guards metallic black

quad_006_Medium_.jpg

My favorite thing i bought- Alba Nerfs

quad_009_Medium_.jpg

My new bumper- Pro Elite

quad_008_Medium_.jpg

Stay tuned more to come :yes:

Share this post


Link to post
Share on other sites


man youre lucky!

wish i could just do it all in like a week!

this one is going to take about 1 month or maybe two to be done with just the cosmetics..

but its all free.

=P

haha:laugh:

Share this post


Link to post
Share on other sites


man youre lucky!

wish i could just do it all in like a week!

this one is going to take about 1 month or maybe two to be done with just the cosmetics..

but its all free.

=P

haha:laugh:

o its already been two months and i prolly have a few weeks left....wont be done ne time soon

Share this post


Link to post
Share on other sites

Looking good!!! I can't wait to see it when you get finished with it. :bf_rasta:

Share this post


Link to post
Share on other sites
too much to do not enough money

Got to choose and pick the right battles.....with my luck the paint would start pealing after a few hard rides and rust would be popping up all over....I would have held off on getting some of the accessories that you can add on at anytime and spent the money on the powdercoat and had one less thing to worry about in the long run.

Share this post


Link to post
Share on other sites


Got to choose and pick the right battles.....with my luck the paint would start pealing after a few hard rides and rust would be popping up all over....I would have held off on getting some of the accessories that you can add on at anytime and spent the money on the powdercoat and had one less thing to worry about in the long run.

well put... not knocking paint but the frame takes the grunt of everything for the most part... if you rode strickly in the dunes i wouldn't worry about it to much... anything but dunes it isn't going to stay nice and pretty for to long...

Share this post


Link to post
Share on other sites

Have you ever been in the dunes on a windy day? It is like being sand blasted. The paint will probably go faster in the sand.

Share this post


Link to post
Share on other sites

Wowsers.

Does everyone realize that these frames are painted from the factory? Tons of bikes leave the factory with painted parts.

Powder coat is very strong... I have/had plenty of things on my R1 powder coated. Powder coat is a fantastic upgrade and will hold up better and longer then paint.

We'll have no problems going the season with paint. The good thing about the northeast is you get 2-3 months of off-season and you can strip/clean/touch up. I have had plenty of dirt bikes that I have rocked painted frames on for an entire season and only seen wear in the factory wear location (heal, lower frame rails, underneith plastics and tank).

Share this post


Link to post
Share on other sites
well put... not knocking paint but the frame takes the grunt of everything for the most part... if you rode strickly in the dunes i wouldn't worry about it to much... anything but dunes it isn't going to stay nice and pretty for to long...

Guys this whole project is a learning experience. I have no doubt that powder coating would be the best option. But we have had alot of problems and have had to purchase alot of new and used parts for this thing. ie swing arm, caliper, brake pads, $200 in nuts and bolts, steering stem, heel quards, we have to still have to get the motor machined to get the stuck head bolts out, and we are rebuilding the top end. As for accessories, yes i bought new nerfs and a bumper- luckily i got them on sale from albaactionsports.com. Regular prices nerfs were $130 bucks, and i got them for $50. The bumper reg priced was $80 and i got it for $29. So i have only spent $90 on accessories. I would still have to come up with another $400 bucks to powder coat and we cant do that this year. maybe next.

We also arent just spray paintin the frame as is or ne thing- we have spent alot of time prepping and cleaning and removing rust-its been primered and sanded and it will get painted today and a coat of clear coat will be put on top. It wasnt done half assed but i know its not going to last half as long as powder coat-trust me i have weighed that option BUT It will get me through the season- and when i have more money to spend next year maybe ill powder coat. :yes::rolleyes: just cant wait to ride the thing :cute:

Share this post


Link to post
Share on other sites


I just wanna say great job! I don't have the patience(spelling?) to do something like that. I bought mine brand new and made it how I wanted. I'm very proud of how mine came out, I think mine is one of the best looking 450R's I've seen. How good I feel about mine will not even compare to how you will feel when you are done. Hats off to you!:wink:

Share this post


Link to post
Share on other sites

We started painting the frame today . The blue i picked out is awesome. Its metallic blue and in certain light has a hugh of purple almost like the nerfs, pics to come soon . :cute:

Share this post


Link to post
Share on other sites

Sounds very cool! I can't wait to see pics. If I had the time and money I would love to have my frame powder coated the same color as the new LT450R frames.

Share this post


Link to post
Share on other sites


Guys this whole project is a learning experience. I have no doubt that powder coating would be the best option. But we have had alot of problems and have had to purchase alot of new and used parts for this thing. ie swing arm, caliper, brake pads, $200 in nuts and bolts, steering stem, heel quards, we have to still have to get the motor machined to get the stuck head bolts out, and we are rebuilding the top end. As for accessories, yes i bought new nerfs and a bumper- luckily i got them on sale from albaactionsports.com. Regular prices nerfs were $130 bucks, and i got them for $50. The bumper reg priced was $80 and i got it for $29. So i have only spent $90 on accessories. I would still have to come up with another $400 bucks to powder coat and we cant do that this year. maybe next.

We also arent just spray paintin the frame as is or ne thing- we have spent alot of time prepping and cleaning and removing rust-its been primered and sanded and it will get painted today and a coat of clear coat will be put on top. It wasnt done half assed but i know its not going to last half as long as powder coat-trust me i have weighed that option BUT It will get me through the season- and when i have more money to spend next year maybe ill powder coat. :yes::rolleyes: just cant wait to ride the thing :cute:

Did yall know that this quad was going to need this much work when yall bought it? Thats ok if yall did and wanted a fixerupper. I could have gotten you a sweet deal on a Raptor 350 and wouldn't have to put a dime in it. One of the guys that we ride with bought it for his wife two yrs ago and tricked it out with all of the GYT-R accessories....his wife rode just a few trail rides with all of us and hasn't gotten back on it....the last price he quoted me was around $2800 with everything on it....the only reason I haven't gotten it is because I have no where to store another quad.

Share this post


Link to post
Share on other sites
Did yall know that this quad was going to need this much work when yall bought it? Thats ok if yall did and wanted a fixerupper. I could have gotten you a sweet deal on a Raptor 350 and wouldn't have to put a dime in it. One of the guys that we ride with bought it for his wife two yrs ago and tricked it out with all of the GYT-R accessories....his wife rode just a few trail rides with all of us and hasn't gotten back on it....the last price he quoted me was around $2800 with everything on it....the only reason I haven't gotten it is because I have no where to store another quad.

Well to answer your question we knew when we bought me a used quad we were gonna tear it down and go through everything, no matter what quad i got. When we bought this one we knew we were gonna tear it down and paint the frame and replace some stuff, but we didnt know that the swing arm was cracked or that certain things were broken, or stuck, so it has turned into more of a project thn we had hoped, but yes i knew i was gonna get a "fixer upper" . This one just turned out to be a lil more work then expected. :yes:

Share this post


Link to post
Share on other sites
Well to answer your question we knew when we bought me a used quad we were gonna tear it down and go through everything, no matter what quad i got. When we bought this one we knew we were gonna tear it down and paint the frame and replace some stuff, but we didnt know that the swing arm was cracked or that certain things were broken, or stuck, so it has turned into more of a project thn we had hoped, but yes i knew i was gonna get a "fixer upper" . This one just turned out to be a lil more work then expected. :yes:

Nothing wrong with getting a fixxer upper but with a play toy you have to expect the unexpected unless you know the person you are buying from. I have only bought one used offroad toy and it was from someone that we ride with. This guy bought a new offroad bike, rode it for three hours the first afternoon he got it, bought a quad the next weekend and never got back on the bike.....it was four yrs old when I bought it with only three hrs of ride time for half the price of what a brand new one would have cost me.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Frank Angerano
      So i took a road trip today to look at a Suzuki Eiger! 2006 in perfect condition other then the fact it starts for 30 seconds and shuts down.  
      Its been sitting for about a year in a shed. 
      It has a plow and a winch included!!!
      Got it for a really good price and all looks good so far.  
       
      Stay tuned.  





    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By Adrian Ciotinga
      So I’ve had this quad for the better part of a month, and it’s been hard to start since the day I bought it. Once it warms up it idles just fine and has plenty of power and starts no problem, but cold it takes 20 seconds minimum of straight cranking to start it.
      It’s not really too big of an issue, I’m just curious as to why it takes so long. Earlier today, it took me about 2 minutes of on/off cranking to get it to fire.
      i have attached a video of a cold start to show you what I mean.
      FullSizeRender.mov
    • By Dwight Williams
      Ok, so I bought this scream of a deal the other day - a 94 King Quad 300 for $40.00.  It's been sitting outside with no carburetor on it for about a year.  Its rusty, missing some parts, wiring is all cut up and spliced etc.  No seat, no racks but the plastic is all there minus the headlight housing.  Anyway, who can pass up a $40.00 quad right?  I get it home and looked at the sight glass for oil level, it's about 1/2 oil and 1/2 water.  I drain it, refill it and turn the motor by hand (recoil starter is missing) and it turns over just fine.  I worked on the wiring for about an hour and got it to turn over with the electric starter and got enough of it sorted out to get a spark.  Did a quick compression test, 70 lbs.  Wet test bumped it up to 90.  Ok, so rings and cylinder washed out with water for a year, not too surprised.  I thought 'what the hell' and sprayed some starting fluid in it and it ran for about 2 seconds - enough to show  it's got life.  Since then the compression has gotten worse, I can't get enough pressure to activate the carb diaphragm, therefore no fuel pump either.  The compression is now around 60.
        Anyway, my question is....is it worth it to try to get this thing going?  I tore the top end down today and the cam and one of the rockers is pretty worn.  I figured a top end job would be about $100 or so, depending on the condition of the cylinder but I'll probably have to put a cam and rockers in it as well.  Doing some research on ebay I figure I'll have to spend about $500-$700 to make the whole machine right again.  Much less just to make it run and use as-is but I won't really like it until it's right.  I don't mind doing the work, I actually enjoy it but I'm concerned about what all that water did to the rest of the internals, I can't really test it all out until I can make it run.
      I know it's a basket case but I'm not into it much at all, even if I do the top end and find something else wrong I'm still not out much.  I'm leaning toward ordering the top end parts and going from there unless you can convince me otherwise - any way to check the rest of the internals without tearing it down?  I plan on flushing the oil cooler before I do another oil change, I've drained it twice now and it gets milky almost immediately just turning the starter - I suspect the oil cooler is polluted badly.
       
      I'll get some pictures today if anyone want to see them.
       
      thanks!
    • By Ellery Zandt
      I have no idea where the antifreeze line coming off the thermostat goes too. The carb two nipples in the pic create a vacumme. Can someone help me on this please....!!! my email direct is [email protected]!!!!
  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By katasha2
      I took apart the carburator to clean out and I can't remember exactly where the springs that are inside the float are supposed to go I've tried to look up schematics but I think I am missing a spring maybe need helpt:confused::confused:
    • By skgw1
      Feul pump went out. Replaced. At times quad cuts out like its not getting gas. Saw article on new pump needs to be calibrated. Told how to go into a service mode. Does not tell how to calibrate after going into mode. Can anyone shed light on this procedure.
    • By Bwdeaton
      I recently picked up a king quad 700 that doesn't run in the hopes of getting it running by spring. It had been previously taken apart some and a few pieces are missing in the engine, but the frame is complete and in good condition. The motor will need a piston, rings, cylinder, cams, and a few misc parts that are missing. Also the cases will need to be split to remove the pieces of piston that are in the crankcase. The piston blew up at high rpm and did a number on the cylinder so I'm trying to find out if it would be worth rebuilding this motor it buying another engine to swap in. There may be more damage to this engine that I can see so I was wondering how bad the insides of it could be considering it destroyed the piston. I have found a motor for 1200 plus 200 shipping, the only problem is I don't have that much now and I would have to save up a while before being able to afford it. Any suggestions appreciated.
    • By superdude811
      Can you put tracks on manual atvs? would it be effective? is 280cc enough to even move them? thoughts/suggestions?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...