Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By Erik Plug
Picked up my first Brute Force yesterday. What should have been an awesome afternoon of riding turn a bit into a deception. As I was unable to really take it out for a test drive at the shop, I decided to buy it and agreed that I would take the test drive at home.
When giving full throttle I noticed that the Brute was choking and lost all of its powers. Faulty fuel pump most likely.
Called the shop and the are coming to pick it up and repair it and bring it back. Good service. Nevertheless feels a bit sour in the mouth as I was told it was a 100% good.
Need to have some patience I now before I can really start riding.
I have a 2008 loncin desert storm that wont stay running.
When it ran it ran rough and backfired a lot.
Now it will only start with throttle and there's a lot of unburned fuel (white smoke), there's also compression comming out the airbox. Is it the carburetor that is broken?
Hi bought a 2012 kingquad ASI last year a great machine which is a delight to ride, but I find sometimes it doesn’t go into top gear just revs high at about 42mph. Any idea ???
Good/Better/Best +1 A-Arms honda 400 X 2008-2014
What are some of the good, better,and the best 1+ a arms out there?
where does Houser Racing Fall?
and something found on ebay
Similar Tagged Content
By Tom Pavlak
Hi Everyone - Need some help.
Got a nice little 220...clean machine. wiring is a mess. I have a diagram however, the one I have has 4 wires coming from the ignition switch not 2 like mine. So, I cant trace wires properly.
There is a white one that runs to the Solenoid, and a brown wire...from the Ignition...I dont know where its supposed to go. Also, on the Solenoid, there are 3 wires..W to ignition, B to start relay and B/Y runs up to the front of the machine...and is not plugged into anything...and there isnt a "Mate" missing it. How do they plug into the 4 open shovels by the 20A fuse?
I'm pretty sure my Lights and start switch/Lights are correct.
Problem I cant get anything...new battery...cant get the start button to work, cant get any power to the lights or switches...so I know something is not grounded or..
Any advice would be greatly appreciated.
By Michael Rogers
Well this is my first time tearing down an ATV. Have done a little work on 2 stroke's in the past, but not much. I'm needing some help. I've got a Bayou that has lost compression. I tested it, and it was like at 40psi. I had already set the timing on it, and it does have spark fuel, etc...
My question is about the cylinder. To me it looks pretty toasted, but need some help in determining. It is a 2000 Kawasaki Bayou 220. I bought it not running, just to see if I can get it running so it has not ran since I bought it. This question is about the cylinder, and part 2 I have will be about the CAM.
Any advice / help is greatly appreciated.
Inside sleeve a line(left line) runs the length that I can feel with my fingernail. The line on the right I can't feel.
Some rust it looks like on these two pictures.
By Mike Strayhorn
last year I bought led lights when I was riding my 4 wheeler the lights started getting dim shut off
now my 4 wheeler will not start the battery is hot everything is dead I checked the fuse and its good
would there be another fuse I am missing I'm took the led bulbs out and replaced them with the ones that was in there
wonder what meh problem is
I recently acquired 1994 Bayou 220 (leaks oil, leaks gas). Beginning by cleaning carb. When I took the float bowl off, the brass overflow tube is not straight (see image). I am not sure if this is "right" or was damaged/modified at some point (although I can't image why). I have looked for an image or drawing that would show this clearly with no luck. Should this tube be straight vertical; and if so, should I attempt to straighten it, replace it, or leave it be (not sure if this would effect the required float level setting as the end of the tube sits just a little lower at the angle). Prob putting too much thought into this, but any info would help!
By Rigo Mena
I have a Kawasaki bayou 220 that won’t start I don’t know if it has something to do with the electrical wires but when I put the screwdriver on both bolts of the relay it wants to crank but can’t and there’s a missing piece I think it’s another relay that has 6 wires going into it
Recently Browsing 0 members
No registered users viewing this page.