Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Roy Anderson

4wheel drive question

Recommended Posts

I have had a 2002 Suzuki King Quad 500 for almost a year. This is a question I’ve posted before, but likely missed the answer due to being new to the site. Here’s the issue. When in 4 wheel drive, especially in low range, especially when pulling a load downhill, I hear a lot of clanking in the front end. As if the front drive shaft was binding then unbinding. A friend who had a 1987 Dodge 4x4, told me all the noise his front end made when in 4 wheel drive was entirely normal. So, is this something I should worry about? I have all the bodywork and tank off right now doing a valve adjustment and carb rebuild. If I gotta do something, I’d like to do it now. Lastly, I’d love to find a carb tuning guide for this era of Mikuni. Haven’t tracked one down yet. Any thoughts of where to find one? Great forum. Have really enjoyed it so far.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By swensy7
      Hey all new to the forum.... We ended up picking up a 2006 Suzuki z50 quad sport and took it camping this weekend. The guy said had a new top end and just put on a new belt. Seem to work fine for a little bit and then it lost power at the rear wheels. Belt was not in bad shape took a look but it just did not seem to have enough power to get my little guy moving. I pick up the rear end tires would go. Set it down lacked all power.   Any help would be greatly appreciated it did run like a top also.      To add to the bad news on the way home I ended up losing the seat so if anybody has one even if it's in rough shape would love to get it or if you have any ideas open to suggestions......
    • By Aleksandr Boreesenko
      doesn't idle at times but sometimes when it does as soon as I touch the throttle it just shuts off, what could possibly be the problem? I thank you very much for any help, Thanks.
    • By scot91
      Hi guys im new to the forum and i hope i put this in the right spot. But im putting this up for my uncle. But he has a 2002 Bombardier quest rotax 650 4x4 All wheel drive. Now i was driving it down the road today and all sudden it shut down i thought it ran out of gas but it didnt. After it shut downi pushed it to the side of the road and tried to crank it over but it wont crank over. It is a electric start none of the lights or anything work So what i was thinking its in the wiring somewhere right? Does any one have a website that has a wiring diagram for this 4 wheeler or does any one know what else it can be? If anyone has any idea please let me know everything willprobley help thanks guys!!!
    • By bradleyheathhays
      Just now rolling over 100k miles. Been feeling some steering weirdness so I get one front wheel up in the air and push at 3 and 9 and sure enough there's some wobble. Pushing at 12 and 6 gives no play at all.
      Although I'll probably be replacing the worn part myself I need some help diagnosing what all might need to be replaced. And since I need an alignment anyway I've made a deal w/ my local Goodyear tire shop to do a pre alignment inspection and identify my bad part(s) so I can replace them before they do the job.
      When I drop the car off what specific parts should I ask them to look at? I'm sure tie rod ends but what other kind of worn parts could be causing movement on the 3-9 push test?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...