Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

2004 Arctic Cat 400 4x4 smoking like a freighttrain


Recommended Posts



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Tagged Content

    • By Lance Workman
      I have an 07 Arctic Cat 400. Non DVX. It’ll turn over and backfire through the carb. I have verified timing, tried in both positions. 180 out. Carb is clean but it’s an EBay special. But I have tried another carb (different from a 350 Rancher) with the exact same results. I have also verified valve lash, good fuel, good plug, compression is about 110. I’m about to my ends with this things?!? Any ideas? 
    • By Chris Owens
      I have an 04 arctic cat 400 fis 4x4 manual changed the centrifugal clutch,  changed the clutch discs and adjusted the clutch. When shifted into gear forward or reverse it will leap a little but will not go it was moving with the old centrifugal clutch but it was worn out. Any help would be appriciated 
    • By Chad Dickerson
      I am goin nuts here! I have a 04 400 air cooled 4x4 , I'm a atv,car,truck,mower mechanic for yrs,just sayin. Ok it cranks and kinda fires now and again then after 5 min of cranking and stopping itl start if u touch throttle itl did then u start all over! If u let it warm up sumtimes u can throttle it up other times it just does! Just depends on it? When it stays running it runs awesome,no problems except it just does randomly like u shut key off? Sumtimes itl start right back up others itl do the no start thing! IV put new plug,adjusted valves and hot tanked carb? I'm at a loss here guys! Please any other ideas? I don't think it's anything to do with flywheel? It's not the auto it has a hi low reverse lever on left fender and foot shifter? Help please lol
    • By axleshaft1
      dead  electric   2004 arctic cat 400 4x4 auto      wire was coroded off man in harness in front of  regulator      two  red  power wires  where they join  into  one   was pulling hair out on this     start removing  tape -  low and behold  problem solved 
  • OEM Parts at Aftermarket Prices
  • Similar Topics

    • By RatpigHoosier
      The Kodiak 400 I just bought didn’t come with an air filter. I’m searching and am not finding an air filter that will work. I’ve checked Amazon, Bike Bandit, etc., but everything I am seeing is for a Big Bear 400 and reviews are saying it won’t fit a Kodiak 400. The bigger issue I am running into is that the ones I see all have what appears to be a female end for connecting with a clamp to a male inlet. The inlet in my air box is female. Now I know I ain’t no expert on ATV reproduction and procreation, but that just don’t work!
      Can somebody please hook me up with a part number or suitable aftermarket filter?  I really didn’t expect this search to be so difficult…..
    • By QuadConfussion
      Hey everyone! Just introducing myself and hoping I can get some insight on where to start. I have an older quad, my guess is about an 07. I know it’s a 700 but I’m having some stalling issues with it after it runs for about ten minutes it will die out. It will start right back up and run but after a minute or two it will die again. Any suggestions on where to start checking things?
    • By Hub
      Hey,
      I purchased a 1994 Kawasaki Bayou 400 4x4 which was running fine when I had all of the plastics off and now that I have put all the plastics back on the machine I am getting some strange symptoms. With the ignition on (neutral light on) and  having the kill switch in the RUN position now have no crank, no spark. But when I put the kill switch in the STOP (or off) position the electric motor crank, but still I am getting no spark. Is it normal for the ATV electric motor to work in the off position and not in the RUN position? It wasn't doing this before. I have replaced the spark plug and the ignition coil so far.  I am wondering if something is getting shorted after I put the plastics back on? Any ideas? If it is a short any ideas how can I track it down?
      Thanks!
    • By xpnet
      Does anyone have recommendations for where to get break pads and what they should cost?
    • By MarkinAR
      So here's one I haven't beat yet, could use some input. Honda 300FW was running fine when one day it started bogging at WOT. Figured dirty carb so I cleaned it and still the same. Cleaned again once more by soaking overnight in thinner and then compressed air. Back together tonight and still falling at WOT. Tried a known good plug...nothing makes sense here. The float bowl does seap a bit due to old gasket, could it draw vacuum enough to interrupt fuel? 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...