Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

1998 Quadrunner 250 Won't go into Diff lock


Recommended Posts

Hello all I have a 1998 Quadrunner 250 4x4 

I'm having problems with it going into high low and won't go into Diff lock..sometimes reverse seems stuck too..I even have were the green neutral light will be on sometimes with the red reverse. After driving it and then stopping it won't start back up until I mess with the reverse shifter. Any help would be appreciated..

Thanks 

Link to post
Share on other sites
  • Ajmboy changed the title to 1998 Quadrunner 250 Won't go into Diff lock


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Tagged Content

    • By tjakes680
      Hi im new to this site thanks for letting me on I have a 1986 Suzuki LT 230 GE quad-runner shaft drive .I got it for a great price a few weeks ago i did some maintenance work fixed a few wires and it runs incredible.My question is what kind of gear oil does this atv use I use 10w40 motor cycle oil for engine J know that helps with wet clutch as well but what about gear oil do you chk it by opening plug and looking how much is in and what type do I use in it 
    • By mpovah
      Hi all, new member here. 
      Picked up a really cheap non-runner last night from a neighbor. He had gotten it from someone else who had rebuilt it a few years ago and it has decorated his garage since.
      It is an early-90's (1992 or 93?) Suzuki LT250, but the weird part is the engine is a neon green color. I am now wondering if someone swapped the original motor out of this quad. Does anyone have experience with these that could give me a pointer as to what this could have come out of? I have heard that some Arctic Cat models had the same Suzuki motor - could that be where this came from? It is a 2WD, and has the typical chain drive/RWD system with both front and rear (rear drum) brakes. Very little rust and mostly complete, for the price I paid it isn't bad, but I am not sure how to pinpoint the engine type, and I would like to have that figured out.
      Just want to make sure what I am dealing with before ordering parts. I will need a carburetor by the looks of things, and air/oil/fuel filters, plugs, etc. 
      Thanks in advance for any help, appreciate your experience with these quads. 
      Matt
    • By chimmike
      Picked up a 98 Quadrunner 500 for a song. It's in rough shape, but funny enough it turned over and fired on starter fluid. Fuel lines are rotted to snot and the inlet tubes to the carb are rusty. I have a rebuild kit for the mikuni, but I'm wondering if anyone has used any of those alternatives on Ebay or Amazon that say they fit? 
    • By JonBat68
      I have a 99 250 Quadrunner. Currently has no spark. It would run for 5 minutes, then shut off. After it cooled down about 20-30 minutes, it would start again. I ordered a new stator and found the old one was damaged (copper windings broken)  I installed the new stator, filled with oil and now it has no spark. Any assistance would be helpful
    • By Ryan Hutton
      Hey guys i am new to this site. i have a quadmaster 500 and last year my brother in law had it out and brought it back. When we went to put it away it wont move now any suggestions i have the belt cover off now. With it jacked up it seem to take gear when its not running.
  • Similar Topics

    • By tjakes680
      Hi im new to this site thanks for letting me on I have a 1986 Suzuki LT 230 GE quad-runner shaft drive .I got it for a great price a few weeks ago i did some maintenance work fixed a few wires and it runs incredible.My question is what kind of gear oil does this atv use I use 10w40 motor cycle oil for engine J know that helps with wet clutch as well but what about gear oil do you chk it by opening plug and looking how much is in and what type do I use in it 
    • By crf250r
      good day everyone, 
                        new to this page. I need help with my 1994 fourtrax 300 4x4. the bike stop sparking for some odd reason so no big deal I order a new ignition coil, that was not it so I order a new cdi box. now I get sparks. by now the battery is low from cranking so much, so I boost it with the truck. the bike as the hardest time to start and when it does it runs rough, bogging, backfire,..., reverse light is on even if im not in reverse but in neutral. and the reverse light gets briter as I rev the bike.i clean the carb twice, remove the reverse sensor and check the ohm, reading 0.0 to 0.9. any idea, I need to get this bike going asap. thanks for your time
    • By doublee
      Hi, i have a polaris 4x6 -89 and im not sure if there might be something wrong with the engine.
      It makes a kind of scrabling sound like when a rod bearing is bad, but i can only hear it when revving quite high, usually bearing fault is heard mostly on low revs.
      Could it be bearings? piston? Or just something loose that is vibrating?
    • By WDex
      New member here. Bought a couple of cheap, non-running ATVs over the last two weeks. Hoping the father-son team can get them running!
    • By freforall
      Hi i have a honda 350es 2002 4x4 (same as rancher but canadian edition). My problem is the clock and trip meter always resetting when i power off the bike. The trip meter reset to 0.0 and the clock flashing 1:00. The other function work normally gear shift, hourmeter and odometer. If i power off the bike for approx 2-5 seconds the clock and trip meter didnt reset. The battery is ok and all the fuse is ok. Can someone help me with this problem please. I found anything in my service manual.
      thanks
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...