Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Hey I have a 97 bayou 300 2x4 (klf300b) that i bought for 1000 last June and sunk another 1000 into it already. When i went to look at it, the seller had warmed it up before hand (he was riding it when I got there). it ran good so i bought it and took it home that evening... next morning it wouldn't hardly start. I discovered the carb was clogged, there was chunks of rust in the fuel valve, the choke lever was missing and other things. I have since cleaned the carb and replaced the fuel valve and gas lines and cleaned out the gas tank and cap.
Enough background on it, the problem is this: It floods if i push it past half throttle in 4th and 5th gear even going downhill and shifting correctly. It also has to idle and warm up when you first start it which is really annoying now that its cold... It also smokes blue smoke for about 15 seconds when started cold- does not smoke at all once warm but the exhaust still smells like burnt metal. A friend told me that it didn't have enough compression. I also found out that the valves are a common cause for low compression on Kawasakis.. I have never adjusted valves before- the most I've ever got into a engine was a head gasket on a riding mower so I'm new to this. My goal is to get this bike running and starting cold like a top- should i tear down and rebuild the top end? What should i try first? I tore the carb apart and rebuilt it and fiddled with the air screw and nothing changed. I also ordered a compression test kit that should be coming in soon.
Ive also considered just selling it for like $500 and taking the hit- Id rather not sink too much more into this machine.. lol
By Matt John
I have a 2017 Polaris Sportsman 570 EFI. Yesterday, I start the machine and it says low power (10.6-10.8). This machine is on its second battery. This is a new AGM battery with 50cca more than stock.
Should I look at the regulator or stator?
got that 220 I'm 'servicing'.......... well it turned into a guts and oil job.... I cleaned the carb and it wont idle cold, but idles too fast when warm. also misfires and burns rich cold (white smoke out of the exhaust) I'm going to order a new carb since the old one is leaking and beat up (some one was tinkering) I'm wondering about the valve clearance and timing...? Maybe a factor? What should the clearance be on the valves? How should I check the timing on this bike? (this is a mid 90s bayou 220 2x4)
So my quad will start and run pull start, i installed new battery, solenoid, ignition. the problem is
1 the starter will try but not start. the quad.
2 when running i cannot shut it down with either the switch or the ignition i shut it down by allowing the fuel to run out.
3 no lights come on headlights or brake lights
when i turn the ignition on my neutral light works as well as the reverse indicator.
any suggestions greatly appreciated.
Similar Tagged Content
these are what i have in my collection ... always looking for more
Linhai 250 - 360 Service Manual
Linhai 260 - 300 Parts Manual
Linhai 260 - 300 Service Manual
Linhai 300 Parts Manual
Linhai 260 Service Manual
Linhai Bighorn CUV Service Manual
By Zacharia Maisonneuve
i have a 1993 timberwolf yamaha and the compression is good and lights work but for some reason the electricity is not going to the spark plug(s)! i got a friend to check it out and they said its no use but im not giving up! please help with this!
Recently Browsing 0 members
No registered users viewing this page.