Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

I have been trying and can't figure out what the trick is. I want to post the video in the post instead of just a link to the video, I have pasted the code that youtube gives you but it doesn't work in the post, it is just shows up as code. What am I doing wrong?

Share this post


Link to post
Share on other sites


Just copy the Youtube video page URL into the post, that's it. Don't use the embed code. :biggrin:

Share this post


Link to post
Share on other sites

For you tube it works if you copy the URL code and then pick the icon at the top of the message board that has the mountains and moon. Paste it in there you are set. I can't get the ones from here to work.

Share this post


Link to post
Share on other sites


For you tube it works if you copy the URL code and then pick the icon at the top of the message board that has the mountains and moon. Paste it in there you are set. I can't get the ones from here to work.

You don't even need to use insertimage.gif, just paste the url from the video page. I noticed that also, where QC videos do not embed like that...

The supported sites are in this thread: http://www.quadcrazy.com/atvforum/announcements-support/3152-embed-videos-within-posts-added.html

Share this post


Link to post
Share on other sites

Apologies, I guess I am too stupid to figure THAT out. who could? Is it too much to ask for a little tutelage? I hate doing things twice. :rolleyes:

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Topics

    • By Johnnyhorsepower
      I finally found an awsome app for your phone that shows you on a map all the trails near your location. You can read or add reviews, look at picts...etc
      Its called: atv escape

      John
    • By marek porowski
      Hi, I got a check engine light and a diagnostic code 520194 2 and i know it has something to do with throttle voltage out of range
      I'd like to know if thats something that can be adjusted ? Or does anybody know what should i test  ?  I just bought this atv and I'm fixing it as its been in an accident. 
      I also changed throttle leaver as original one was broken and I noticed inside the 4x4 selector assembly there are 2 contacts but I'm not sure if they're suppose to make contact at idle. I found some info online but some are saying they're suppose to touch and some say they're not. I think id depends of the year of the machine but I'm not sure. I'd really appreciate any help that i can get with this
      Thanks 
    • By 06kfx440
      So I was looking at my John Deere today and though, how could I make this cooler. So I tinted the windows. Lol.
       
      As I got home I was staring at my Polaris and the wife’s kfx. I thought I would have to replace the crank because of piston slap on the Polaris. Turns out I just had to adjust the choke cable a tad more. Runs great.
       
      Why do we have insurance if we only need it sometimes, and that’s questionable.
       
      What is the definition of being an adult? You can ask 6 people and get 6 different answers.
       
       
      Sent from my iPhone using Tapatalk
    • By quadcrazy
      Do any mods to your atv? Let's hear about it!!!
    • By Reece Bowen
      x   just bought this expedition 425 and the Speedo needle does not work. The lights work for the shift indcator. So is this an electronic Speedo or cable? Is there a way to fix it or will I have to replace the unit? Thanks for any help you can provide.
  • Similar Tagged Content

    • By OutlawGade
      Hey guys. Starting a Grizzly Tracker Video Thread.
      [ame]
      [/ame]
    • By OutlawGade
      Starting a thread to keep our Videos in one spot. Thanks for watching and I hope you enjoy.
      If you like you can join the Group at www.facebook.com/groups/NOSatvs
      [ame]
      [/ame][ame]
      [/ame][ame]
      [/ame]
    • By Tamio
      Hi, me and my friend were out and riding the other day and filmed some so I tried to do an edit from the videos that I got. So this is my first ATV edit and I need you guys to tell me what I can improve in my filming and editing. Please give rewarding comments!
      [ame]
      [/ame] Thanks!
    • By ddiggerr
      1983 Yamaha YT175
      Fired up for the first time after total rebuild. Now I have no idea whats going on. Compression is 120, new plug, new fuel and oil lines, new choke and fresh fuel. Carb cleaned and reeds are good (no gaps).
      Will not start without choke and stalls out when choke is off. Played with choke adjustment and doesn't change.
      It fires up first pull and only idles if I play with idle screw. As soon as I touch throttle, it goes bezerk on me and I have to shut it down as you can see in video .......

      You can here the recoil lever tinging in the video. I lost the spring. D"oh!!
      So far I have swapped ignition coil, spark plug, CDI with no change. I have removed flywheel to check keyway and it is where it should be.
      Checked resistance on stator ... I get 10ohms +/- 10% on pickup coil within specs as per manual and I get 273ohms on charge coil. Manual states 300ohms +/- 10%, so that is also within spec.
      I have also swapped out jet needle and played around with different settings. Eventually I put it back to the 3rd line.
      The engine already has new seals and bearing so I am completely baffled as to what I am missing here.
      Any takers?
      Any and all suggestions will be appreciated.
      Thanks
      I have also swapped carbs from a running YT175. Same results.
    • By Admin
      We've corrected the Youtube video layout that was breaking posts. You should be able to post a link from YouTube, Dailymotion, Amazon, Metacafe or Vimeo into a post and the video should display.
      Please let us know if you run into any issues.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...