Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
I wanted to share an experience and a fix.
Headed out was following a pole line, was looking for a cross track that may take me to this speckle trout looking spot on a creek. All paths and semi paths... failed. Second objective was to reach a speckle trout lake that has been recently stocked... followed 1 trail to dead end, followed second trail to dead end.... while investigating options on foot and the quad idling it died.
It wouldn't start. eventually it did... and when it did … it was essentially a pinned idle. activating the throttle did seem to speed it up but it wouldn't knock out of the racing idle. couldn't put it in gear at that idle speed. got towed out.
when I first got the quad, I ran it off a trail and buried it pretty good in the soft snow... eventually winched out. It wouldn't start. eventually did and it was fast idling. not as fast as this last time. but still fast. it eventually seemed to settle and I got it in gear and by the time I was back to the truck was acting ok. chalked it up to the bike being at a bad angle in the snow.
My investigation last year lead to the throttle position sensor TPS. how to jumper the diag block to see the sensor position on the display,. I focused on this nearly sure it was a detuned sensor or broken sensor again this time.
I tore down the front plastic and stuck my head into the TPS area to see what I could see. What I found was that the throttle body assembly had actually come out of the mounting area (not sure what it is called). the ring clamp was loose I could move it easily. Hopeful, I tore down the air intake assembly above it (air filter...etc) removed a sensor clip and a hose.
I backed off the clamp some more and was able to reseat the throttle body assembly. put some blue lock tite on the clamp screw. When I was cleaning off the air intake assembly to ensure I dropped nothing down the intake, I noticed the underside of the air intake "box" also had a clamp. this screw was completely missing.
I went to the hardware store, bought a metric replacement (brought clamp with me), seated the assembly, settled the clamp blue lock tite that as well...
quad fired right up, idled normal, idled up without hesitation and dropped right back off. Cost of solution $3.87 CND for a pack of 5 metric screws. moral of my story was don't assume an idle issue is a throttle position sensor problem... there are a number of other factors including air pressure, which I believe was my issue.
By Richard Barlup
I have a honda trx200 and it starts fine when I use the starter button but won't start with the pull cord.
The 2019 ATV Motocross National Championship Series (ATVMX), an AMA National Championship, headed to Sunset Ridge MX in Walnut, Illinois for the sixth AMA Pro round and fifth amateur ATVMX round.
View the full article
Looking for Yamaha ATV VIN (Vehicle Identification Number) Number Decoders? Once you find your ATV VIN number off the tag on your Yamaha ATV, you can go to all kinds of websites that have VIN Decoders available. The best ones are backed by the Yamaha ATV manufacturer, however there are plenty of aftermarket Yamaha ATV VIN Decoder websites on the web. This topic will stay pinned and if you find any to add, please do it with a reply.
The following Yamaha ATV VIN Decoder websites are available where you can just enter your VIN number and it will shows you some of your ATV model details:
NICB Theft Check https://www.nicb.org/theft_and_fraud_awareness/vincheck
Similar Tagged Content
By Ashton Crawford
Hello everyone, i have 2000 Polaris Trail Blazer 300 I’ve been stumped on for weeks. I’m having a lot of issues starting the quad. I cleaned the carb spotless because I thought it was a carb issue and bought a new fuel line because it wasn’t getting fuel. The carb gets fuel perfectly fine now but it won’t start. The spark plug I a little worn out but it’s good enough for just one start. The only time it does “start” is when I spray starter fluid into the carb. But it never stays on. It’ll start for a bout a second then just die out immediately even if you’re giving it some throttle and the choke is on. I have no clue what I should do. If you need more information, have questions, or have any slight idea what the issue would be and how I could resolve it. Please reply ASAP. Thank you.
By Jeff Wharton
I have a 2000 Arctic Cat 300 4 wheeler. I have been having some carburetor issues. So i bought a new carb. Now I'm having these issues. The unit will start and idle fine, when i go to accelerate it wants to cut off. So i checked to make sure it was getting gas and the fuel filter will be full of gas and then once the carb opens the filter drains down and will not refill quick enough to run. So i checked to make sure gas was flowing to the filter and it is flowing fine through the line. I remove the filter and run the gas line directly to the carb and the engine idle fine and then it will run good as i ride it for about 10 minutes then it will start with the same issues again i cannot accelerate enough to move the 4 wheeler. Every time i accelerate the unit will cut off. What is wrong with this thing. My 400 Arctic Cat is doing the same thing except it will backfire, I'm lost i have tried everything i know to do, what am i missing here. Thanks for your help
I’m looking for new replacement shocks (front & rear.) on my 1997 Kawasaki Bayou 300 2x4. New OEM shocks are upwards of $400. I haven’t pulled the rims off to check the eyelet to eyelet length but I’m hoping an expert on this site does know( I called Kawasaki direct yesterday and they were of know help.) Any technical help would be appreciated. TY fellow members. Vic
Hello, how are you'ns doing? I'm in the process of tearing my Kawasaki Bayou down to fix a rattling noise and an oil leak. I'll probably be asking questions about this project. My step-son has an Arctic Cat 300, he was riding yesterday and when he turned it off it was running fine, but it won't do anything. The lights come on but it won't turn over or anything. Does anyone have any ideas on what might be wrong? TIA
Recently Browsing 0 members
No registered users viewing this page.