Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Sign in to follow this  
utvboard

UTV of the Month - October 2008

Recommended Posts

October 2008 UTV of the Month

UTVGuide.net's very own Kawasaki Teryx has been chosen as UTV of the Month for October 2008.

KawasakiTeryxBuildup-196-784662.jpg

KawasakiTeryxBuildup-282-748459.jpg

KawasakiTeryxBuildup-285-737689.jpg

Specifications:

More...

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Topics

    • By davefrombc
      Kawasaki Bayou 400 Service Manual
      View File Kawasaki service manual
      Submitter davefrombc Submitted 08/24/2017 Category Kawasaki ATV  
    • By RCNY1
      Seems impossible to find a pair of front shocks for my 02 Yamaha Kodiak,newer or older listings are they the same as a big bear ?  Factory are $245 each !!! Any help appreciated 
    • By mike costa
      Motor starts right up, but when I open it up past quarter throttle it bogs way down while ridding, the longer it runs the worse it gets. If I just leave it in neutral and  give it full throttle it revs up and down. 
      Back history:
      Bike sat for 3 years,
      Installed new plug, cleaned the fuel tank, took it to a shop and had the carburetor gone though.
      Picked up from shop, motor bogged down first day and barely got me back to the truck an 1 mph.
      Took back to shop after a month I was told it had a bad plug, I told him I just replaced it.
      Got quad home and it is doing the same thing!!!!!!!!! 
       
      Thanks in advance for your support!
       
      The carburetor has recently been gone through by a shop
    • By gpenberthy
      My ranger crew 700 is hard to shift and gets locked into forward. When trying to shift into reverse we have to shut engine off. Shift then restart. Checked linkage and gears are fine. The RPMs arent really that high but did notice a little improvement when we lowered it. Did notice the throttle cable looks damaged. Could this be the issue? 
       
    • By MarkinAR
      Let me start with I have about 30 years of ATC experience, but not much with stuff made after 1988.  Some, but I'm mechanically inclined so it's all good.  I"m rehabbing a 1997 Bayou 220 to send back into the wild and the mechanicals are now all good, just working on making the electrical system...electric.  Right now, I have no power on the white wire as tested directly on the plug at the starter solenoid.  I'm assuming that wire is supposed to be hot any time it's attached to a battery?  The genius that had it before snipped a couple wires and inserted a fairly heavy push button for electric start bypassing the electrical system. I think i've corrected everything north of the solenoid but the white wire has me stumped.  Is my assumption that this should always be hot with a hot battery correct?  Does this indicate a broken circuit in the starter solenoid?  Relay was also bad and wired incorrectly, but that's resolved and I can make the relay click bypassing the solenoid and connector, directly giving the white wire 12V.  Thoughts?
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...