Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts

Anyone want to hook up?

Im new but im riding.

Prentice coopoer is awesome, but i know coopinger cove and the sequatchie valley well.

Ive been into alot of areas four wheel drive trucks and done a lot of rock climbing.

Maybe this post needs to be moved , but i didnt see a better place yet .

Anybody want to hook up and ride?

Share this post


Link to post
Share on other sites


where are you in Tennessee?? I used to live in Nashville....find the member on here, Scott, he lives in south TN I believe...he might wanna get together :)

Share this post


Link to post
Share on other sites

Actually I live in north TN but I travel to the south to ride mostly. There are not much riding spots available in middle northern TN. We also go to Ky some.

Share this post


Link to post
Share on other sites
Actually I live in north TN but I travel to the south to ride mostly. There are not much riding spots available in middle northern TN. We also go to Ky some.
Is there a place with Carrie in the name or by Carrie Tenn? Should be north of Knoxville.

Share this post


Link to post
Share on other sites

Caryville? It looks near Royal Blue which is suppose to be a pretty good riding are. I have never been.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By PolarisRich
      I thought I would make a quick "How-to" on setting wheel alignment since I was flipping my tie rod ends and I was going to have to re-align the wheels anyways.
      Here's some of the tools you will need...

      1.) Start with the ATV on a smooth and level surface, like a cement garage floor or driveway.

      2.)Center up (Eyeball It) the handle bars and lock them into place with 2 ratchet straps, one on each side of handle bars. This of course prevents them from moving when your adjusting the tie-rods.

      3.) Place two Jack Stands approximately 2 feet in front of the atv even with the outside edge of the two front wheels.

      4.) Wrap a length of string all the way around the ATV and Jack Stands, Start and end at the rear hitch. Make sure the string is the same height from the ground on all 4 wheels. I like to attach a few elastic bands to both ends of the string before attaching the string to the hitch. This makes it easier to adjust the strings when moving the Jack Stands.

      4.) Break lose the inner and outer tie-rod nuts. NOTE! Make sure you use 2 wrenches, one on the nut and one on the ball joint. Damage can occur by only using one wrench.

      5.) Adjust the string by moving the Jack Stands in or out untill the string just touches both of the side surfaces of the rear tires on each side of the ATV. This will take some time to get it right but it needs to be done!

      Check manufacturers wheel alignment specifications on your specific make and model before you adjust any components.
      For this wheel alignment I'm using the Polaris Specs which seems to be a common setting.
      Polaris - The recommended toe alignment is 1/8″ to 1/4″ toe out. This is a total amount, not per wheel.
      6.) On the front rim, measure the distance from the string to the rim at the front and rear edges of the rim. The rear measurement should be 1/16″ - 1/8″ (.2 to .3 cm) more than the front measurement.


      7.) If an adjustment is necessary, Turn the tie rod itself with a wrench or your hand in small increments. It doesn't take much to move the tire a long way, so go slow. Keep re-checking your measurement's until you have a 1/16″ - 1/8″ differance to the string.

      6.) Once your satisfied that you have the correct "Toe Out" measurements you can tighten up the inner and outter tie-rod nuts on both sides. AGAIN...make sure to use 2 wrenches.
      7.) Now take your ATV for a test drive to test your adjustments. If it still pulls one way or the other, just repeat the above steps to tweek the adjustments again utill your happy.
      The whole process only takes about 15-20 min.
    • By seth baronie
      Need a stock drive clutch for a 2015 sportsman XP 1000. Part number 1322953
      [email protected]
      paypal ready
    • By Todd Barrett
      Hi all 
      I'm finding it rather difficult to find 10"x6" front rims. My question is will 12"x7" fit and will there be enough clarence when on full lock? 
    • By Rich1028
      Anyone riding this weekend?
       
      who is riding,and where this weekend?
       
      wife's quad is to be picked up sat. morning,then off to tire shop to have new tires put on,I'm thinking maybe a short blast up to leota trail on Sunday.
    • By John Miele
      Any public access areas near Charleston, SC to ride? If you know of a hidden gem, please share!
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...