Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Sign in to follow this  
utvboard

New Billet Spare Tire Carrier from MachineTrix

Recommended Posts

UTV-SpareTireCarrier-2-727938.jpg

UTV-SpareTireCarrier-1-709047.jpg

Glendale, AZ - Machine Trix is proud to introduce their Billet Spare Tire Carrier system. It is mounted to 1.5" or 1.75" tubing in any direction. This is a complete bolt-on system with no welding required. The T-Handle that secures the spare also serves as a lug wrench and comes with handle grips.

Machine Trix

UTV Industry News

UTVGuide.net

More...

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Topics

    • By Gilbey
      Does everyone run the tire pressure as stated on tires or perhaps a couple # below to soften the ride a little?
    • By Shawn Hurt
      I have a 2013 KQ I bought it new but rolled it a few years ago. I have replaced the left lower A-arm and left tie rod, the steering is still a little sketchy as I just eye balled the alignment. But the major issue is the left front tire cambers out at the top and has wore the tire bald. Tires have about 2000 miles on them but other 3 are half tread and left front is a slick.. I can not see anything else bent and don't know what to do..  
    • By Rinconrecker
      RZR 2 for 2
      1st - Dry Pull Suzuki Samuri @ River Ranch


      2nd - Dry Pull Jeep CJ7 @ Rancho


      Who's next? coming for ya!!!

    • By Dimelol
      I have a 2003 Kodiak 450 that i purchased a while back with around 300 hours on it. It has never ran right from the beginning. Initially i thought it was just a carburetor issue because it was all clogged up from sitting for months. It has been cleaned, rebuilt, and taken off probably about 10 times troubleshooting this problem. I have quadruple checked everything including float height ect and it is set correctly, the jets are also brand new, needle and seat have been pressure tested as well. So after all of that I am convinced that the carburetor is not the culprit. I have an issue where the idle is very choppy, almost as if it is misfiring with a rich condition on top of that. I can use a brand new plug and run the machine for just a few minutes and it will be a dry and and coated in black carbon build up. The exhaust also has a strong smell at idle. I had trouble restarting it when hot for a while, but i adjusted the valves and it seemed to solve that issue. They were both way out of tolerance (tight). The weird thing is, outside of idle it seems to run pretty well. 
      So with all that being said I have ruled out the carb/valves/compression and moved on to the ignition and this is where i have a few questions about factory specifications. I guess the main question I have is, how strict are these tolerances? And could them being off by this amount cause the issue I am having? Do all three of these parts really need to be replaced? I would like to know before I spend the money on these new parts, and it not fix my problem. Below I will list what the specs were in the service manual along with the reading i got.  This is my first experience testing ignition components. I just found it odd that all 3 are out of spec according to the service manual.
      Spark plug cap resistance: 10 kΩ at 20 °C (68 °F)
      My Reading: 8.90 kΩ
      Primary coil resistance: 0.18 ~ 0.28 Ω at 20 °C (68 °F)
      My Reading: Fluctuated between 0.4 - 0.5 Ω
      Secondary coil resistance: 6.32 ~ 9.48 kΩ at 20 °C (68 °F)
      Reading was within the specified range.
      Pickup coil resistance: 459 ~ 561 Ω at 20 °C (68 °F)
      Reading was within specified range.
      Rotor rotation direction sensing coil resistance: 0.085 ~ 0.105 Ω at 20 °C (68 °F) 
      My reading was 0.3 Ω
    • By utvboard
      Introducing the Dash Frame system for the Kawasaki Teryx from Black Rhino Performance. The Dash Frame fits nicely into the middle of your dash, and is designed to closely follow the shape of the Kawasaki Teryx dash. This frame puts your gauges and switches at the same angle as the upper dash for easy viewing of the gauges and convenient placement of switches. The panel provides mounting for 3 2"
      https://www.utvguide.net/dash-frame-system-for-the-kawasaki-teryx-now-available/
  • Similar Tagged Content

    • By ryan93
      my atv and the internet are telling me two different tire sizes that are way off and need help figuring it out..PLEASE HELPP
    • By auburnfan327
      I have a 2007 Honda Recon ES and need some new tires. The stock tire sizes are 22x10-9 and 22x7-11. I'm looking at some Carlisle AT489 tires but the closest sizes i can find are 22x10-10 and 22x7-12. Will they fit? Thanks.
    • By rockwell16
      great tire brands Green ball ,ITP, Maxxis and bighorn
      (GREAT NEWS ON A 2X4 YOU CAN MIX TIRE ON THE FRONT AND BACK LET ME EXPLAIN THAT MORE BACK TIRES LETS SAY YOU GO WITH THE GREEN BALL SPARTACUS TIRES ON THE BACK YOU CAN GO WITH THE MAXXIS X PATTERN FRONT TIRES CANT DO THAT ON A 4X4
    • By WhiteMooseHunter
      I have a quad (Can-Am) that takes 25 inch tires, just got a set of rims with tires that are 26's, not a whole bunch taller, don't see any problems using them? My main question, just in case I want to swap the tires in the rims, is on the rear tires.
      My original tires are 25/11/12 the replacement rims, the tires are 26/10/12. If the rims have the 26/10's now, will it work with the 25/11 tires? They appear to be the same width, are they? How can I tell what will work on the rim.
      Inside the rim, it is stamped 12/7.5 ET:+51
    • By labs3557
      I bought some stock wheels and tire that came off a Honda Foreman i believe. My problem is the rear rubbs my exhaust.
      Should I just put in a spacer and move the whole thing out an inch or two? Or should I buy 2 new wheels that have the correct backing?
      I have a 96 Fourtrax 300. the wheels that were on it are 9X9.0AT the new ones are 11X7.5AT.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...