Quantcast
Jump to content


Painting my ATV plastics??


Spooge

Recommended Posts

If I can remember correctly......For every added 10 lbs you drop 1HP.......

Every little bit helps.......

When I went to All Stainless on my Z......I Hollowed out the bolts Just to save some Weight....I know.....CRAZY!!!!:laugh:

I wasnt saying it weighed 20 lbs, It probably weighs a 1/2 lb max

Link to comment
Share on other sites

Just a side note, hollowing out the stainless steel hardware is the most purpose-defeating thing you could do... and a waste of time, effort and money.

If you got stainless steel hardware because its stronger, you just made it weaker thatn factory hardware by drilling it.

If you bought stainless steel so it wont rust, it will because you drilled it. The only reason stainless steel doesnt rust is because it has a zinc coating and by drilling youve just grinded that coating away and exposed raw steel, anything freshly drilled is extremely prone to rusting

Link to comment
Share on other sites

Just a side note, hollowing out the stainless steel hardware is the most purpose-defeating thing you could do... and a waste of time, effort and money.

If you got stainless steel hardware because its stronger, you just made it weaker thatn factory hardware by drilling it.

If you bought stainless steel so it wont rust, it will because you drilled it. The only reason stainless steel doesnt rust is because it has a zinc coating and by drilling youve just grinded that coating away and exposed raw steel, anything freshly drilled is extremely prone to rusting

I Had a guy in Florida make them for me..He is an OLD SCHOOL Triker and has been making parts for the Tri-Z since 1985...Tried and True...they have been on my bike for 8 yrs now and holding strong,,,,It wasnt a Wast of anything for me....I got what I wanted and I am Happy with the Result....That is all that matters,,,,,As with your painting of the plastic,,,,If it makes you happy do it.....I have personally seen painted plastic and it looks Like Chit on a White Horse....Its a VOD,,,,,,(Victim of Distance)....Looks good from 50'....I have also seen guys restore their plastic by sanding it down....Looks like Almost perfect Stock when they are done.....Very labor intensive but worth it in my opinion.....

Im not here to butt heads with you.....I dont need to be SCHOOLED,,,,

Carry on with your Thread......:wink:

Link to comment
Share on other sites

well i took the pics but the supplies ur gunna need will prob bring u up to about $20-$30 and ur gunna need some special tools i completely forgot about..lol..ill post pics tomorrow maybe u can get some ideas if u want from the pics...or u can go to ur dealer and they can do it for ya just another thought

do u have a

-grinder or dremel

-vice

-drill press or powerful drill (portable or corded)

-drill bits for metal

-shop or store were u can get square tubeing and about an about a 1/8 of an inch thick bout 10-12"s long and 5 inch's wide peirce of metal?

and mods if u read this how many pics can i put in one post cause i have a lot..lol

Edited by outlander560
Link to comment
Share on other sites

well i took the pics but the supplies ur gunna need will prob bring u up to about $20-$30 and ur gunna need some special tools i completely forgot about..lol..ill post pics tomorrow maybe u can get some ideas if u want from the pics...or u can go to ur dealer and they can do it for ya just another thought

do u have a

-grinder or dremel

-vice

-drill press or powerful drill (portable or corded)

-drill bits for metal

-shop or store were u can get square tubeing and about an about a 1/8 of an inch thick bout 10-12"s long and 5 inch's wide peirce of metal?

and mods if u read this how many pics can i put in one post cause i have a lot..lol

Arg.. I only have a few of those things.... but a friend of mine has an auto shop, he might have the right tools :D

Link to comment
Share on other sites

my guess u put it in a vice so it dont go anywere then u get a big flat head screwdriver and a hammer and hammer the clip on the top off... make sure u pull down the rubber washer underneath the clip at the top or it wont pop off... u also got to make sure the shocks r as loose as possible and u could use rope, zip ties or ratchet straps to compress the spring enough to get the clip off thats what u could also do...but thats what i think i dont know what mywifeknowseverythin does

wat type of paint r u using to do the springs?

Link to comment
Share on other sites

yea was not surprised about that sorry man...uhh u got ratchet straps.... or u can get another person with u and they can use a crow bar or something like that to wedge in between the coils of the spring to way the spring down to pop off the clip..not the safest way mind u but if u dont want to get the spring compressor go for it just try not to kill urself..lol

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By hardcastle
      My friends KQ 300 starts fine and runs, as soon as you put it in gear and try to accelerate its bucks and farts like crazy, not moving... I cleaned carb and it worked good for 1 day... now back to same problem.... could it be such as a bent valve????
    • By Admin
      View File 2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      2006-2011 Honda Rincon TRX 680 FA/FGA service manual
      Submitter Admin Submitted 04/09/2024 Category Honda ATV  
    • By Charlesbrown
      I’m looking for a top end kit for a Yamaha. I would like to see how well the engine runs before spending $6-$7 hundred on oem. Niche has complete kits from $1-$2 hundred.  Anyone have experience with Niche or similar Chinese companies? 
    • By mywifeknowseverythin
      For those of you who are into coffee, I found this little article that might interest some of you.

      I admit it. I am a coffee snob. I try not to be obnoxious about it, but let the record show: I enjoy a really great cup of coffee. But pay $4 a cup for it? No way. Even snobs have their limits.
      Over the years, I’ve learned that a really good cup of coffee has less to do with money and more to do with knowledge and care. In fact—and this is the amazing thing—the more I learn, the less I spend.
      BEANS. Purchase whole bean coffee as soon after it has been roasted as possible. Freshness is the key to a superb cup of coffee. Purchase in small amounts—only as much as you can use within 2 weeks of being roasted.
      RATIO. The perfect ratio of coffee beans (prior to grinding) and water is: One-half cup whole beans to 8 cups of water.
      GRIND. Grind your beans as close to brew time as possible. A burr or mill grinder that crushes the beans is preferable to a blade grinder that cuts them. Once ground, coffee should be used immediately.
      WATER. If your water is highly chlorinated use bottled or filtered water. It must be right at 200 F, just short of boiling temperature, when it hits the dry grinds. This is critical to creating a great cup of coffee. Consume immediately.
      STORE. The enemies of roasted coffee beans are air, moisture, heat and light—in that order. Keep your beans in an airtight container that is not close to moisture (sink, dishwasher), heat (oven, stove) or light (countertop). Do not store your daily coffee in the refrigerator or freezer because contact with moisture causes it to deteriorate. For larger quantities of roasted beans that you cannot use within 2 weeks, wrap in airtight bags and store for up to a month in the freezer—making sure the beans are completely protected against moisture. Once removed from the freezer, do not return.
      BUY. Most supermarkets offer high-quality, roasted coffee beans for $.60 to $1 per ounce ($9.50 - $16.00 per pound). Ouch! Discount warehouse clubs like Costco, Sam’s and B.J.’s have considerably less expensive coffee at about $9 a pound for name brands like Starbuck’s and Peet’s. Still, that’s too rich for my blood.
      ROAST. I roast my own coffee for two reasons: It is infinitely better tasting and half the price. I purchase green coffee beans by mail order for about $4 - $6 a pound, depending on current conditions and variety. I started out roasting in a popcorn popper (West Bend’s Poppery II is ideal) and have graduated to a small coffee roaster. My favorite resource for everything from roasting instructions to green coffee beans is http://www.u-roast-em.com/. Owner Jim Cameron has a wealth of knowledge and is anxious to share.
      You won’t believe how easy it is to roast coffee. And enjoyable, too. I roast only one-week’s worth at a time—about twenty minutes. Green coffee beans have an indefinite, useful shelf life of at least a year, and probably two or longer. But I’ll never know. Coffee beans just don’t last that long around my house!
    • By opnea
      Where do yall ride at in South Florida other than the MX track on Krome Ave?



×
×
  • Create New...