-
Similar Forum Topics
-
By kiriyaaoi
Hello everyone, I just picked up an 02 LT-F250F the other day and have been in the process of tearing it down to fix some stuff- one of which was the cylinder base gasket leaking like a sieve. Well, I know why that is now, and I also discovered that someone had been in there before. I didn't take pictures, but it looks like it was probably run low on oil at some point, the cam journals and the "bearings" (for lack of a better term) in the head and the valve cover are totally wiped out, very deep grooves. From what I know it's very difficult to repair aluminum in this way, so I'm trying to figure out where to go next.
1. Have someone grind down the head and valve cover and fit actual bearings in since the aluminum is screwed, and have the cam ground down to match. I have no idea what this would cost.
2. Buy a replacement head+cam+valve cover.
#1 I was hoping someone might have some advice on, but #2 seems like it'll (probably) be the more cost effective option. However I'm running into some difficulty, it seems like the 2001 and 2002 models specifically use a different head part number, 11100-19B10, instead of 11100-19B01 like for all earlier models. What exactly is the difference between them? There are obviously far more of the earlier heads because it ran for over 10 years. Are they actually interchangeable? I've also noticed there are heads from the LT250EF that has 4 valve heads but also otherwise look identical. Would those work as well possibly? I'd like to not have to drop $500 on machine work or new heads on a $1300 quad that I'm already putting a bunch of new parts on. Oh, and it has a new piston and the cylinder itself looks pretty good too, as I said someone was in here before me.
Any help or advice would be greatly appreciated. I'll post pics of the carnage tomorrow.
-
By Kawiherder
It starts and runs Ok but after a while the temp gage lights up and the fan fails to start. Any suggestions on where to start looking would be helpful. Thanks
-
By STLJ
Hope everyone is having a great weekend,
While riding my quad just quit, I mean dead. No life on the dash, no crank and obesity no start.
Had a quick look under the plastic, batt reading 12.7v power at the key switch.
Changed the power pack, still no luck.
Anyone else have similar problems?
I don't see a fuse box/panel, is there fusible links in the system? If so where di I start looking?
SK
-
By kawasig
Hello All
I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
-
By StayTheTrail
Hey everyone!
Ya'll have been so great and welcoming to our new Ambassador program, we wanted to be sure that Quad Crazy was getting info directly from us about the Stay The Trail educational program too.
The program was started in 2003 with the purpose of educating the public about responsible trail use and fostering a sense of stewardship among OHV enthusiasts.
The "Where To Go" section of our website is another great resource for anyone looking for trail info. We host all of the Motor Vehicle Use Maps (MVUM) and overlay them on the Google mapping system. We want this site to be the place you go to for trail maps as you plan a run. The MVUM maps show what trails are open for what types of vehicles. If a trail is not on these maps, it is not an open trail.
We attend events and set up at trailheads throughout the season to ensure that folks are getting the info and education they need to be responsible on public trails. We have posters and brochures that quickly review these guidelines (all of the Etiquette info can also be found on the website).
Very soon, we will have a HUGE announcement about mobile mapping options!
Sam and Matt are going to be around on the forum, keeping everyone updated on what is new with the program and answering questions. Feel free to ask us any questions!
Oh – and don’t forget to follow us on FACEBOOK!
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.