Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

xtreamclean

X-Tream Clean New Product Release - Red Roost Degreaser

Recommended Posts

X-Tream Clean Products based in Charlotte, NC has introduced a new product called XTC Red Roost Degreaser. XTC Red Roost Degreaser is a new environmentally friendly multi purpose degreaser/cleaner that can be used on any surface without harm. XTC Red Roost Degreaser can be used to clean and degrease plastic, rubber, metals, vinyl, textiles, machinery or just about anything you can spray it on. XTC Red Roost Degreaser is user friendly, easy to use, fast acting spray that packs a punch and will cut through oil, dirt, grease and general grime. XTC Red Roost Degreaser is biodegradable, non-toxic, non-corrosive and non-flammable. A great product to use on motorcycles, autos, boats, bicycles, ATVs, home and for industrial applications. Safe to use on all surfaces and safe for o-rings, rubber seals and plastic parts. XTC Red Roost Degreaser is a spray and rinse or spray and wipe product that easily lifts grease and general grime without scrubbing or brushing.

X-Tream Clean Products develops and markets cleaning products designed specifically for the powersports industry. For further information please visit www.mxwash.com or email [email protected].

Share this post


Link to post
Share on other sites


i have tried some of their atv cleaner products n they work great ..........

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Randel1
      Product warning:  Lighting products manufactured by Larson Electronics LLC  9419 E US HWY 175, Kemp Tx. 75143
      Hi, I’m G. Randel and I have a small business that does boat and motor service and repair and rigging. I also service and repair off road 4 wheelers, lawn equipment and small engines. I have been doing this type of work for over 40 years, so I have accumulated some knowledge about the accessories and products needed to support those things. 
      I recently installed two high intensity LED lights on the T-top of one of my customers boats. He bought the lights after he had done considerable research and consultation with manufacturers. He wanted to make sure he was getting something that would serve his needs which was to see where he was going at night while underway on the water.  He decided on lights manufactured by Larson Electronics out of Kemp, Texas. They were reported to be rugged, weatherproof, waterproof to 3 meters and were warrantied against workmanship or component failure under normal use for 3 years. One light quit working within 10 months, the other is still working after about 16 months.  I removed the defective light and sent it back to Larson Electronics for warranty repair or replacement and they denied the warranty claim. Their reason was “failure was due to environmental damage”.
      At the time of purchase these lights sold for over #365.00 each and the representative that my customer talked to at Larson Electronics assured him that these lights were well suited for the purpose in which they were going to be used. 
      So, if you are looking for electronics, as in lighting, for your ATV, SUV. Boat, or any other outdoor application you might want to keep in mind that Larson Electronics LLC
      9419 E US HWY 175, Kemp, TX 75143 might not fulfill their warranty claims if you have a problem with their products.
       
    • By Stoopidbot1
      When we first got the package, we thought it seemed really heavy. After taking the TigerTail out of the box, we determined it’s really not that heavy compared to most winches and tow systems you can get out there and it seemed to be extremely well built. It has to have some weight to it, to be able to do it’s job! The Rhino is not only a fun means of transportation, it is also our recovery vehicle at  races, and any time someone finds their limits in the mud. So, we immediately took it out to the garage to go put it on the Rhino.

      When we first  looked at the set up we thought, “This will be interesting to get a wrench between the spool and the bottom mounting plate.“ But to our surprise they covered this, the bolts have a collar which drops into the bolt hole and holds it in place. All it took was one wrench on the bottom nut. This process took maybe five minutes. The unit easily slides right into the receiver. At this point the only down fall I have seen was, it does not come with a pin to hold it in the receiver, I was required to buy an additional one. Not a big deal but a tiny inconvenience.
      Eager TigerTail to try out the, we headed out to a local ride spot to test it out. Lucky for us as we were unloading the toys when someone in an Isuzu Trooper, not meant for the mud, found a mud hole. He managed to bury his front end in the peanut butter-like slop up to the bumper. With the rear tires barely clinging to the surface by inches of hard packed dirt, he was not moving. So we thought this could be the perfect time to test out the Tiger Tail and have it be of a little assistance. I backed the Rhino up to his vehicle, and found it takes some slack on the rope before the hook will come out of the holder. As soon as the hook was free, it easily extended and retracted. We hooked it up to the Trooper and I slowly pulled forward to fully extend the rope. This being a heck of a first test for the Tiger Tail, I floored the Rhino, spinning the tires on the hard pack. To my amazement , the Rhino started inching forward and before we knew it, he was out of the slop and on to the hard stuff. We unhooked the Tiger Tail and it went right back into it’s housing trouble free.   From what we have seen so far, this is an absolutely amazing product. From the first glance of the Tiger Tail we knew it was well built and well thought out.  We know that it will definitely come in handy out on the trails and the track.  They even put a hole on the main bracket so you can still have a ball for towing on the back of your rig. Great idea! We will definitely recommend it to all of our friends. This is also one of those products that everyone who sees it wants to know all about it.  
      All in all, the Tiger Tail is an awesome little product! www.tigertail.us  
      Available on Amazon
      View full post
       
    • By Frank Angerano
      I would like to hear who uses what to clean there ATV’S. 
      I’ve always been a fan of simple green and it’s always worked well but with this new property and the crazy black mud and clay that’s there  I have to say the simple green is not cutting it. 

      So from cleaning  right after a ride to cleaning them when you find one in a barn I would like to hear what everyone does and what your recommendations. 
      I’m looking to try something new.  
    • By StolenATV
      Red Honda Pioneer 700 side x side and child’s Polaris outlaw 50cc both on black Echo ATV trailer stolen 12:30 pm Last Night 10/14/19 from S Garfield St and Mississippi, in Denver, CO seen going south from 1100 block. . I have reported this information to the police. Suspect Vehicle Black Power Ram Truck w/ NY plates
      The post Stolen Red 2017 Honda Pioneer 700-4 deluxe and Gray multi-colored 2019 50cc Polaris Outlaw appeared first on STOLEN 911.
      View the full article
    • By Spiq Eddy
      I just helped my brother order a replacement pull-start/recoil start assembly for his 83-89(not sure witch year) Suzuki quad.  It did not come with the part that sits inside between the engine starter shaft and recoil start assembly,  that mounts to the engine and has teeth that catch the recoil start to turn over the engine.  I can't remember what its called and can't look the part to order. 

  • Similar Tagged Content

    • By dctaz37
      I was out the other night for a few minutes and noticed the exhaust close to the motor was bright red. I searched the internet and saw suggestions that it may be running lean. Could this be it? How do I correct this?
    • By bikerman61
      Hello to all!
      New member
      I have a 1984 Honda Big Red 200ES that has no spark. I was out riding it and it just quit. I replaced the coil and CDI but that was not the problem. I borrowed a Honda service manual and went through the ignition system section and checked for possible problems. One check was for the alternator exciter coil. On the black with red tracer wire it said there should be 100-400 ohms between the wire and ground. I had zero. If I tested this right that might be the problem. They did not show how to test the pulse generator. I would like to get some feed back before I throw more parts at it.
      Thank you for your time.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...