Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By Wesley Floyd
Hey guys, Thanks for looking at my post. I haven't had a lot of experience with problems like this before, so I'm a little bit at a loss. The Quad was really hard to shift, (the dirty carb leaking gas making it idle high didn't help either). The only Idea I have would be is that the torsion spring is worn out, and that there is a normal parameter for how much it should move when those two arms of the shift shaft assembly spread apart. That's my thought. Maybe someone who has more knowledge then me can let me know if i'm on the right track 😀
Have an 02 big bear 400 with play in the steering, which is irritating when driven down the road. The bars slop a bit left and right when going straight. Is it something that just needs tightening up? Steering was like that when I got it. I have other issues with this wheeler to fix first, but I thought id see if this was a quick fix. Any help is appreciated, Thanks
Soooooooo,,,,,Its been awhile!!!! Whats new...Hmmmmmm...Where to start.
My son has now turned 16...We worked feverishly on his new ride. His Daily Driver now. 1969 Ranchero.
I have 84 trx 200.It's just a beater machine that I picked for cheap. It runs fine, but there is a lot of play in the front end of the machine. Just wondering if it could be a tie rod maybe? hoping it will be an easy fix? But I have my doubts on that one.? Any leads or suggestions would be be awesome! Thanks and happy 4th! - Dave
Similar Tagged Content
Alright so I know that they all have their goods and bads. My options are the raptor 660 or 700(probably 700), ds650, outlaw 525, predator 500, or trx700. Before you rant and say this one is the period, I will have a budget of around $3000 tops. So that is however much I spend. After buying a raptor(660), ds650 and predator, I would have at absolute most $1000 dollars left. How ever with the raptor 700, outlaw 525, and trx I would be surprised to have any money left over. Now the extra money
Now what I know, the ds650 is a pig stock, needs uncorked and tuned and has no reverse but can be a beast and rides good, the raptor 700 is a wheelier and way better than the 660 but neither can hill climb very well, the 660 is tippy and weaker and hard to tune. The outlaw is fast and expensive but rides like a dream but can't power slide, the predator is okay. Good power good shocks, just a good quad but has some reliability issues. And the trx700xx that is a dream but is like 4k and don't come up from sale much. Correct me if I am wrong with any of these statements. So which would u choose AND WHY, I don't give a shit that u can owned a Yamaha since they started making em, why would u choose the one u chose. Thanks, and yes I did post this on multiple forums to get more views and more responses.
Sent from my XT1585 using Tapatalk
Went for a ride out in the desert to look for an old railroad tunnel ... What a Great Day !!
[ame=http://www.youtube.com/watch?v=unLFQele9bM]14 May 2014 Black Rock To Eureka - YouTube[/ame]
If you're one of them guys or gals that does everything on a mobile device, you'll have to watch the video here ....
2000 Bayou misses out about half the time.
I have done the following
Cleaned the Carburetor.
Replaced the plug and check the plug wire, its wire, Checked the plug boot it ohms out at 500 ohms
Motor has 125# compression.
I did find a barked place on the pickup coil wiring coming out of the motor case.
I pulled the cover and ohm the pickup coil. It ohms at 470 ohms. I repaired the barked insulation and reinstalled.
I replaced the igniter with a new one.
I was told that the voltage regulator could be the problem so I unplugged it and made made sure the battery was fully charged and started it and ran it off the battery only. Still misses out.
I added a jumper wire to ground on the igniter to make sure there was not a bad ground somewhere. I also added a hot wire to the igniter to be assured that the key or kill switch was not the problem.
Nothing I have done has corrected the problem.
Attached is a video. Note: the video camera does not show what the human eye sees. The timing light does not light when it misses but the human eye sees that it is dim during the times the video shows it not flashing.
Any Help any of you guys or gals can give me will be appreciated.
Recently Browsing 0 members
No registered users viewing this page.