Quantcast
Jump to content

  • Do you own an ATV or UTV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Hey! big issues with my LTZ-400


Recommended Posts

hey all.

I have a 05 LTZ-400 and used to ride it very often. Now things have come up (college and other things as well) and i have not ridden it for about a year... now some issues came up.

one big issue is Well.. everytime I try cranking it up I see fuel pouring from the intake and into the intake bucket. Now... I do not know much about Quads but my main hobby is cars. I currently have a 3000gt VR-4. So i have a fair amount of knowledge about mechanics.

Anyone know what has happened? only modifications it has is an exhaust and K&N air filter.

Link to post
Share on other sites


Like you I dont have alot of exp. with these quads (mines an 04 400) but I'd say if it sat for that long you might want to start with cleaning the carb. I bought my son a 98 recon that sat for about 6 months and had to do the same thing to it.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Tagged Content

  • Similar Topics

    • By quadmaniac
      So here's a topic for anything goes forum and to get a way from the china virus stuff...lol. Has anyone been noticing the small drips of news about ufos and the government confirming? President Obama has an interesting late night segment. How warm and fuzzy do you feel when an ex-gov official confirms objects in the sky they can't explain...
       
    • By marek porowski
      I was wondering if anybody seen that problem and know what could cause it 
      it’s new to me 2018 Yamaha grizzly 700 with just over 4000km 
      it starts fine and runs great until it gets to normal running temp. Fan turns on few times and than it stalls. If I try to start it right after It won’t start but if I let it cool for a while it will start and run normal for a bit and than stall again. 
      so far I checked the stator output voltage and it’s around 22 volts AC between all 3 poles. I measured voltage on the battery while it runs and it’s around 14v so charging seems ok. 
      I’ve read somewhere that it could be the coil but I’m not sure how to test it 
      does anybody have any ideas what could that be ? 
    • By Muskyjim
      I recently purchased a 99 big bear 350 2x4 that was sitting for a while got it running and went to take it for a ride after about 10 minutes into the ride it stalled and wouldn't let me shift down into neutral tried rocking it back and forth but will not go into neutral...can anyone point me in the right direction on where to start?
    • By diamonddogs
      Hi i bought my first atv last week, mostly for plowing. its a 94 yamaha big bear 350 4x4, with plow, new front axles, carb rebuild and some other stuff for $900. in todays prices, i think it was a pretty good deal. I plan on tearing it down and doing a semi restoration in the summer. its been clearly neglected so i suspect i will need to do a fair amount.
      couple questions. 
      1. parts and manuals, so far i know it needs front shocks, tie rods, brakes, cables, lots of small stuff, whats your guys favorite online atv parts store? where can i find a good repair manual?
      2 - starts and drives great, shifts a bit hard? not sure whats normal because i dont have a point of referance. i have to almost lean back in the seat and lever my foot up to get it to shift, seems like there is either alot of play in something (shift lever itself is tight) or there is a long travel, or it just dosent want to shift. also the hi / low / reverse lever needs to go past the gate a bit to actually shift into gear, and seems to need me to shift into nutral before shifting into reverse (not sure what your supposed to do). also wondering a bit about the history of the machine, because the plastics have a slot for a dash mounted shifter, but the one on it is a gated shifter right above the pull starter. 
      3. seat and plastics repair, seat is quite torn up with a seat cover over it, plastics are pretty cracked up, these items i havent found replacements for for any reasonable price, i dont care a whole lot about asthetics but whats the best way to functionally repair these things? is there reasonably priced replacements somewhere? i plan to bedline the whole thing after im done. 
      4. there was no title, but i did get a bill of sale, will it be difficult to get it titled / registered? (im in mn)
      thanks in advance for your help, looking forward to being part of the community

    • eManualOnline
    • By Jason Hatton-Fearnley
      have a 1996 bayou 400  with a starting problem 
       
      when checking sparkplug grounded to engine
      -turn key on, hit starter, get one spark then nothing
      -turn key off and back on hit starter, get one spark then nothing
       
      Any ideas
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...