Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

GaKingQuad400

2008 Suzuki King Quad 400FS Backfiring

Recommended Posts

My new KQ just suddenly started backfiring VERY loudly sometimes when I get out of the throttle at a good speed and let the motor help me to slow down along with braking. It also will make a soft backfire if I rev it up a little in neutral, and the last symptom it has is when I get it up to temp and let it idle it will purr like a kitten and all of a sudden just shut off intermittently. I already bought a new plug, gapped it, installed it and if anything it made it worse. I did have the 100 mile service done not long ago and it just turned 400 miles today so it leads me to believe that it may be running just a little lean but I wanted to run by everyone here to see if anyone else has had this happen and if so, how you remedied it.

Share this post


Link to post
Share on other sites


I'm assuming this has a carb and not Fuel Injected like it's big brother...

Sounds like it's running out of fuel in the carb bowl. Has this quad sat for a little bit or have you been pretty regular riding it. It's a 2008 and they're almost at 2010 models....so it's 2 years old. Maybe the carb needs a cleaning?

Share this post


Link to post
Share on other sites

I guess I should have mentioned that it has a carb but no, it hasn't sat very much at all. I just purchased it a couple months ago and ride it regularly either at the house or at our hunting lease a couple days a week. Wish I could find a clymer manual for it so I would feel comfortable removing the carb bowl to check for trash. Anybody have any links or pics on removal of a Keihin CVK32 carb?

Share this post


Link to post
Share on other sites

I have pics of carbs on other 400 series atvs...which may use the same carb. I would definately invest in a manual.

Share this post


Link to post
Share on other sites


It is possable that the fuel pump vacume line has a leak. If this happens, the fuel pump doesn't work well and air is introduced making the engine run lean. Assuming of corse that this machine has a fuel pump . Also if it has a vacume fuel petcock, check that vacume line as well.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Chris Stokes
      What is a good option for a 13 year old that is dying to get her very own atv to ride? Thanks in advance for your recommendations. I currently own a Polaris Sportsman 570 and have been happy with the Polaris sportsman line but have ruled out other brands.
    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By Eddie Rahm
      whats up fellas....the white wire going from the throttle body came unplugged from the circuit  board and im not sure where it plugs back in to ? i see where the red wire goes but im not sure where the white wire goes...im not even sure what those wires do..any help would be appreciated..thanks. 1996 polaris sportsman 500 4x4 push button awd.
    • By weblex
      Problem: The ATV starts and runs at idle perfectly. But as soon as I open the throttle, the engine starts to slow down until it stops. On the attached video you can hear the sound of how it works: see video below
      Prehistory: there is a Polaris Sportsman 500 1998, which for about 1.5 years stood in repair, including also replacing CDI with one taken from the same ATV. Finally, the vehicles were on wheels, traveled several kilometers and overheated - forgot to fill the antifreeze Came back home in small moves. The next trip started well, but after 10 km there was a feeling of a small drop in power (even as the vehicle got warm completely) but still drives. Next trip - the situation is repeated. The next test of ATV through time and a huge loss of power from the very beginning. The engine sneezes, does not want to go more than 5 mph.

      What has been done: the carburetor has been replaced with a new one (inexpensive, $ 40), a new spark plug, a new ignition coil, the engine head has been removed, the piston is in good condition, valves were corrected - but the problem was definitely not in them.

      Ignition control unit is suspected. Who faced similar? Please help in solving the problem.
      Thanks in advance.
       
       
    • By Ajmboy
      I saw this article on Motosport and thought it was pretty good. Anyone add anything?
        You might think hopping on-board an ATV and going for a spin is just as easy as taking your regular 4-wheel car for a ride around the block. After all, both have four wheels. How hard could it be?
      In many respects, you're right. Some adventure riders choose quads over their two-wheeled counterparts of the dirt because there's less chance of crashing and it's easier to learn. ATVs also offer more manageability for younger riders to get acquainted with outdoor riding than a dirt bike.
      However, beginner riders on ATVs tend to make the same mistakes that result in crashes, roll overs and injury that could be avoided with some instruction and know-how. If you're looking at a fun family outing by renting ATVs or want to get into the sport take advantage of the following points and avoid the same mistakes so many other first time ATV riders make that end their day early or before they barely get started.
      1. Nerf Bars
      Get Nerf bars. These are not soft cushy add-ons that are cousins to the football you use during backyard football games. In many respects, Nerf bars are gigantic foot pegs. Don't bother with traditional foot pegs because you'll constantly slip off and because of the "I feel safe factor" that comes with riding a quad you'll also have a tendency to let your feet drag when riding. That's a recipe for getting one or both of your feet caught in the back tire resulting in serious injury. Nerf bars allow you to stabilize your feet and get maximum control over the ATV

      Rest your feet easy on Nerf bars
      2. Rolling Over
      Believe it or not, it's fairly easy to roll an ATV over. And you don't want to be on the bottom of that sandwich.
      The most common way of ending underneath a quad is looping out. That's done by hitting the gas and having little to no experience with the power of an ATV. The front spikes up like an out of control stallion, throws you onto your back like a bucking bronco and then pins you like a UFC Champ.
      The second way is when you're having a bit too much fun sliding around in mud or other slick conditions, the tires finally do what they're designed to do and grip the ground but the rest of the bike, with you on it, keeps going.
      Finally, those who think they've found their bearings take aim for a steep slope and try to conquer it only to end up upside down or in their attempt to arch alongside said steep hill, tumble over the side.
      3. False Sense of Security
      This goes somewhat hand-in-hand with the roll over capability that many riders fail to appreciate therefore they also neglect wearing proper protective equipment. Don't think wearing jeans, t-shirt and sneakers is adequate protection when riding a 4-wheeled machine powered by a gas engine that doesn't have seatbelts. You need a helmet, goggles, gloves and riding boots at a minimum. Once you start ripping it on the track or trails add a chest protector, neck brace, knee brace, etc.
      4. Throttle Control
      Everybody wants to skip the kiddie stage and get right into hair-raising speed when it comes to riding ATVs. OK, most everybody. But for those who do so many put on the cloak of invincibility and think a quad is merely a mini car that finally enables them to release all sorts of pent up childhood inhibitions.
      So they jab their thumb into the throttle with the expectation of a controlled roller coaster ride. Instead, they loop out and end up underneath the quad or manage to stay seated only to careen off course and introduce their 4x4 to a large tree. ATVs normally have a thumb throttle and most have an automatic clutch so the clutch is one less thing to worry about. So go slow and figure out how much "thumb" is too much and get used to the speed and power an ATV delivers before really going for a ride. Oh, one more thing, learn to take your thumb off the throttle!

      It's not to hard to loop out on an ATV
      5. Loading the ATV
      Never, ever ride an ATV up a ramp into the back of a pick-up. If you want to know why just go to YouTube. If you want to know how to load an ATV check out this fine piece of quality information on How to Load a Motorcycle, Dirt Bike or ATV into a Truck.
      The bottom line to riding an ATV the first time is treat it like you would anything that comes with a modicum of danger. Careless behavior endangers you and others but with common sense and a willingness to learn you'll enjoy of lifetime of riding quads.
      For additional information on riding and/or maintaining ATVs see:
      10 Quick Safety Tips for ATV Trail Riding Tips for New ATV Owners Choosing the Best ATV for Beginners 10 Things That Alter Your ATV Performance Written By: AndrewT
       
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...