Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
what's the reason you're on here...do you race, just ride? race and ride?
me....I'm a racer chick. Last summer I started motocross/supercross and actually won the championship in the women's class......this year I'm going to start harescrambles
I'm stoked:yes::biggrin:and I LOVE to beat the boys:laugh:
I wanted to share an experience and a fix.
Headed out was following a pole line, was looking for a cross track that may take me to this speckle trout looking spot on a creek. All paths and semi paths... failed. Second objective was to reach a speckle trout lake that has been recently stocked... followed 1 trail to dead end, followed second trail to dead end.... while investigating options on foot and the quad idling it died.
It wouldn't start. eventually it did... and when it did … it was essentially a pinned idle. activating the throttle did seem to speed it up but it wouldn't knock out of the racing idle. couldn't put it in gear at that idle speed. got towed out.
when I first got the quad, I ran it off a trail and buried it pretty good in the soft snow... eventually winched out. It wouldn't start. eventually did and it was fast idling. not as fast as this last time. but still fast. it eventually seemed to settle and I got it in gear and by the time I was back to the truck was acting ok. chalked it up to the bike being at a bad angle in the snow.
My investigation last year lead to the throttle position sensor TPS. how to jumper the diag block to see the sensor position on the display,. I focused on this nearly sure it was a detuned sensor or broken sensor again this time.
I tore down the front plastic and stuck my head into the TPS area to see what I could see. What I found was that the throttle body assembly had actually come out of the mounting area (not sure what it is called). the ring clamp was loose I could move it easily. Hopeful, I tore down the air intake assembly above it (air filter...etc) removed a sensor clip and a hose.
I backed off the clamp some more and was able to reseat the throttle body assembly. put some blue lock tite on the clamp screw. When I was cleaning off the air intake assembly to ensure I dropped nothing down the intake, I noticed the underside of the air intake "box" also had a clamp. this screw was completely missing.
I went to the hardware store, bought a metric replacement (brought clamp with me), seated the assembly, settled the clamp blue lock tite that as well...
quad fired right up, idled normal, idled up without hesitation and dropped right back off. Cost of solution $3.87 CND for a pack of 5 metric screws. moral of my story was don't assume an idle issue is a throttle position sensor problem... there are a number of other factors including air pressure, which I believe was my issue.
Want to show you one automotive show that I filmed in my town called Crazy Race. This was two day race in Qualifications round, Semifinals and Final. In this 4 parts I am showing best moments from all rounds and entertainment of the show.
Crazy Race Part 2 contains a qualifying round where all riders race against each other, selected by lot and split by two. They are free to drive in any direction and to hit their opponent's car everywhere except at the driver's door. Anyone who intentionally hit the other car in the driver's door is disqualified. Winner of each race continue in the semifinal round. In this part I will present the best moments of the qualifying round!
Part 3 shows you the best moments from Day 2 - Semifinals and Final. Battles in the semifinals are among the winners of the first day races, but this time they are selected by lot and divided into 4 battles of 4-5 cars each. The rules in each battle are that they only have to drive in one direction and try to neutralize other opponents until there are only two players left. Then the battle between the two last drivers has the rule to drive in any direction until only one who has qualified for the final round is left. Again, anyone who intentionally hit the other car in the driver's door is disqualified.
For the final round there were only two cars left, because the other two players who got the right to be there had problems with their car and could not participate.
Part 4 containing entertainments between battles and winners rewarding.
This event will have second round in 05-06 October 2019 and also will be filmed For this new round I will filmed in many new angels and places. Will prepare a lot more videos and many new entertainments . This 4 videos was my first try so many things to wish for better filming in the future one.
Hope you will like them and of course feel free to comment and to ask everything. Hope you will Subscribe to my channel and to be first to see my other content and of course new round of Crazy Race! Thanks!
As the owner of a pretty tricked out 2008 Kawasaki Teryx, I am very familiar with the Teryx. My Teryx did not stay stock long, but I recently spent three days in a bone stock 2008 Teryx on a ride to the Grand Canyon.
The 2008 Teryx is a great machine, but my biggest complaint was that it came out with carbs instead of fuel injection. In less that a year since the first Teryxs hit dealer floors, Kawasaki dealers are already selling 2009 Teryxs with EFI. The New digital fuel inject on the Teryx is really nice. The engine starts right up and idles smoothly. On acceleration, the 2009 Teryx felt more crisp and seemed to get up to top speed a little quicker. While it is not a night and day difference, I definitely preferred everything about the EFI on the 2009 over the carburetors on the 2008.
Next up on the list of what's new is a fuel gauge. I know it doesn't seem like something to get that excited about, but I do some long distance rides, and the fuel level display takes the mystery out of "I wonder how much fuel I have left?"
The Teryx Sport has upgraded aluminum wheels which not only look much better, but are also 2.2 lbs. lighter than the standard steel wheels. Losing unsprung weight not only requires less energy to get the tires spinning, but also helps the suspension work better. And as a little bonus, the aluminum wheels are actually strong that their steel counterpart.
Suspension is on the 2009 Teryx Sport has a few upgrades as well. The gas-charged Kayaba shocks have reservoirs all the way around to help reduce fade in rough terrain. The preload adjustment is step-less, and they have fully adjustable rebound and compression (high and low speed) damping. Although we did not have any opportunities to jump the new Teryx Sport, we did get into some nasty whoops and hard g-outs.
I felt the Teryx Sport suspension handled the terrain better than a standard Teryx suspension. The ride through the light chop was a bit smoother than a standard Teryx and when we got into the whoops I felt a little more comfortable as well. Although I was able to bottom out the front shocks on a few hard g-outs, a standard shock would have gone to the stops more often and with more force. Overall, even though I did not spend any time trying to fine tune the adjustments on the new Sport shocks, I think they are a worthy improvement over standard shocks.
The Lime Green plastic on the Teryx Sport is a great color. Much more sharp than the drab green found on the 2008 Teryx. And with all the UTVs out in the dunes in Glamis, there is no doubt that you are in a Kawasaki when you are driving it.
The 2009 Kawasaki Teryx 750 FI 4x4 Sport has a MSRP of $11,899.
A full list of all new 2009 Kawasaki Teryx improvements and photo galleries can be found here.
2009 Kawasaki Teryx Sport Press Intro
2009 Kawasaki Teryx 750 FI 4x4 Sport Review
Teryx 750 FI 4x4 Sport - Kawasaki
RIDE RED Honda 2009 TRX300 someone broke into our garage Monday, June 29th in the middle of the day … the stinkers took my deceased husbands 4 Wheeler, he passed last year cancer.. .. IF YOU KNOW … I will ask no questions please return … If you can help get the item returned $$$ reward.. It’s not about the 4 wheeler it is losing another piece of him…
The post Stolen 2009 Honda TRX300 – Red – Garage Kept appeared first on Stolen 911.
View the full article
Similar Tagged Content
By Ashton Crawford
Hello everyone, i have 2000 Polaris Trail Blazer 300 I’ve been stumped on for weeks. I’m having a lot of issues starting the quad. I cleaned the carb spotless because I thought it was a carb issue and bought a new fuel line because it wasn’t getting fuel. The carb gets fuel perfectly fine now but it won’t start. The spark plug I a little worn out but it’s good enough for just one start. The only time it does “start” is when I spray starter fluid into the carb. But it never stays on. It’ll start for a bout a second then just die out immediately even if you’re giving it some throttle and the choke is on. I have no clue what I should do. If you need more information, have questions, or have any slight idea what the issue would be and how I could resolve it. Please reply ASAP. Thank you.
By Jeff Wharton
I have a 2000 Arctic Cat 300 4 wheeler. I have been having some carburetor issues. So i bought a new carb. Now I'm having these issues. The unit will start and idle fine, when i go to accelerate it wants to cut off. So i checked to make sure it was getting gas and the fuel filter will be full of gas and then once the carb opens the filter drains down and will not refill quick enough to run. So i checked to make sure gas was flowing to the filter and it is flowing fine through the line. I remove the filter and run the gas line directly to the carb and the engine idle fine and then it will run good as i ride it for about 10 minutes then it will start with the same issues again i cannot accelerate enough to move the 4 wheeler. Every time i accelerate the unit will cut off. What is wrong with this thing. My 400 Arctic Cat is doing the same thing except it will backfire, I'm lost i have tried everything i know to do, what am i missing here. Thanks for your help
I’m looking for new replacement shocks (front & rear.) on my 1997 Kawasaki Bayou 300 2x4. New OEM shocks are upwards of $400. I haven’t pulled the rims off to check the eyelet to eyelet length but I’m hoping an expert on this site does know( I called Kawasaki direct yesterday and they were of know help.) Any technical help would be appreciated. TY fellow members. Vic
Hello, how are you'ns doing? I'm in the process of tearing my Kawasaki Bayou down to fix a rattling noise and an oil leak. I'll probably be asking questions about this project. My step-son has an Arctic Cat 300, he was riding yesterday and when he turned it off it was running fine, but it won't do anything. The lights come on but it won't turn over or anything. Does anyone have any ideas on what might be wrong? TIA
Recently Browsing 0 members
No registered users viewing this page.