Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Sign in to follow this  
utvboard

Upgraded Suspension is now available for Polaris RZR 170

Recommended Posts

LoneStar Racing has completed the development of their Polaris RZR 170 long travel kit. The kit features front a-arms that are 3 inches wider per side and made of tig welded 4130 tubing for added strength.Rear wheel spacers or a new wider rear axle is available depending on budget and intended uses.The LSR long travel kit features 9.5” of travel using 15.25” long shock, with 4.75” of stroke. (2:

More...

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Topics

    • By colin james
      View File 2006 Polaris Sawtooth 200 & Phoenix 200 Service Manual
      This is the service manual for 2006 Polaris Sawtooth 200 & Phoenix 200 ATVs. Download all the chapters for the complete manual. 
       
      Submitter colin james Submitted 11/25/2018 Category Polaris ATV  
    • By Mo Salem
      So my front hub broke, I’d like to put aftermarket on. Hard to find new oe ones. Please help. I’m new to all of this, I have some car knowledge and try to apply it
    • By ATVNetwork
      Introducing the 2020 Yamaha XT-R editions of ATV and Side-by-Side vehicles featuring exclusive XT-R features like a factory-installed Warn Winch, advanced suspension, special-edition paint and color-matched wheels with extreme terrain tires, all Assembled in the USA for unmatched Proven Off-Road capability, comfort, and confidence. 
      YXZ1000R SS XT-R: https://yamaha.us/yYXZXTR 
      Wolverine X2 XT-R: https://yamaha.us/yX2RSXTR
      Wolverine X4 XT-R: https://yamaha.us/yX4XTR
      Grizzly EPS XT-R: https://yamaha.us/yGrizXTR
       
       

      View full post
    • By Trevor B
      Hello. I got this fourwheeler to fix for my buddy. It wasnt starting at all when I got it so I opened the valve cover up and checked the timing and the timing was way off. I set the timing bolted all back together and it started. It only stays running with very little throttle applied. There is a weird noise coming from the engine and it smells like its burning and also smokes from the headers. I posted a video idk how helpful it will be but I need some advice on the next step. I want to say it's the piston and rings, but I'm not too sure was also thinking something was up with the valves. Thought I would get some advice before trying anything. Thanks!
       
       
    • By PolarisRich
      I thought I would make a quick "How-to" on setting wheel alignment since I was flipping my tie rod ends and I was going to have to re-align the wheels anyways.
      Here's some of the tools you will need...

      1.) Start with the ATV on a smooth and level surface, like a cement garage floor or driveway.

      2.)Center up (Eyeball It) the handle bars and lock them into place with 2 ratchet straps, one on each side of handle bars. This of course prevents them from moving when your adjusting the tie-rods.

      3.) Place two Jack Stands approximately 2 feet in front of the atv even with the outside edge of the two front wheels.

      4.) Wrap a length of string all the way around the ATV and Jack Stands, Start and end at the rear hitch. Make sure the string is the same height from the ground on all 4 wheels. I like to attach a few elastic bands to both ends of the string before attaching the string to the hitch. This makes it easier to adjust the strings when moving the Jack Stands.

      4.) Break lose the inner and outer tie-rod nuts. NOTE! Make sure you use 2 wrenches, one on the nut and one on the ball joint. Damage can occur by only using one wrench.

      5.) Adjust the string by moving the Jack Stands in or out untill the string just touches both of the side surfaces of the rear tires on each side of the ATV. This will take some time to get it right but it needs to be done!

      Check manufacturers wheel alignment specifications on your specific make and model before you adjust any components.
      For this wheel alignment I'm using the Polaris Specs which seems to be a common setting.
      Polaris - The recommended toe alignment is 1/8″ to 1/4″ toe out. This is a total amount, not per wheel.
      6.) On the front rim, measure the distance from the string to the rim at the front and rear edges of the rim. The rear measurement should be 1/16″ - 1/8″ (.2 to .3 cm) more than the front measurement.


      7.) If an adjustment is necessary, Turn the tie rod itself with a wrench or your hand in small increments. It doesn't take much to move the tire a long way, so go slow. Keep re-checking your measurement's until you have a 1/16″ - 1/8″ differance to the string.

      6.) Once your satisfied that you have the correct "Toe Out" measurements you can tighten up the inner and outter tie-rod nuts on both sides. AGAIN...make sure to use 2 wrenches.
      7.) Now take your ATV for a test drive to test your adjustments. If it still pulls one way or the other, just repeat the above steps to tweek the adjustments again utill your happy.
      The whole process only takes about 15-20 min.
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...