Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
I made my intro about a QuadRunner I was working on and found a multitude of problems. Most I fixed, but I'm thinking that I'll be making more trips to see the 90' LT-250/4WD. Age and needing regular attention is the reason. The owner, NOT being mechanically inclined, adds into the equation.
So, I deliver it and was offered, as payment, a 95' LT-250/4WD, with paper. It didn't run and had been sitting outside for last 12+ months. It was (basically) all there. This happened Saturday and this "Barn Find" came home to live out it's final years (I suspect).
Today I finally found time to look at her. Not a pretty sight. Rough life, many hrs....... MANY! Only 2399mi, but the speedo is disco'd. I just want to know if this will be worth pursuing. First things first, a really good cleaning. I hate working on dirty vehicles.
The battery actually took and held a charge! The carb was pulled, cleaned and the tank drained. Found a broken orange wire, dangling loose, near the carb. It was hot when the key was on and ended up connecting to a 10A fuse block. Well, I wonder why it didn't run???? Hmmmmmmmmmmmmm!
Carb back on, fresh non-eth fuel, had to remove the air filter for this test (needs replacement), sprayed a little ether..... hit the starter, fired and died. Third time's a charm, she runs. I'll be going thru things as I can and questions will follow, in this thread.
By artis allen
I bought a Kazuma Cougar 250 from a guy who used to fix ATV's but wanted to get rid of all his machines because he's "too old" and wants to quit fixing them, from what he says. anyway, One of the machines I bought was this Kazuma which I can't find any parts for it, or very little parts. I found one website that still sells parts, which I'm thankful. For the internal parts, I had to refer to the Honda Rebel 250 for parts. I had to buy 2 new pistons and gasket set and I couldnt find the parts so I did some research and found that alot of the parts are similiar so I ordered it and it was a match. I also used the manual for the Honda Rebel/Nighthawk and use this information to disassemble and assemble the motor. Very helpful for anyone who has one of these things. If anyone has more info on these things, please feel free to post.
warrior 350 is a 2002 it has a lot of custom features and after markets stuff that will stick out when u see it that ive done to it the plastic and headlights is from a 94 I’ve also rebuilt the top end of the motor with a new high compression piston & polished the intake and exhaust valve ports polished the inner area around the valves to keep carbon buildup from ever happening it has a lot of new parts it’s been rebuilt from the ground up all wheels are the bike runs amazing on handlebar dash pad has a black toggle switch for the LED lights on front bumper the rear axle is painting and the rear brake hub is painted blue so we’ll stick out and be very noticeable on the outlaw clutch aof lever the outlaw emblem is painted by me will stick out like a sore thumb it has custom rear Warrior decals on back fenders also has a monster energy ATV fx decal kit also has a lot of other stickers on it from parts that has been put into the quad I raced it a couple times would really like to have it back if it can be found I love a lot of money invested in the bike over the years I don’t have very much to offer right now for a reward
Parts list on stuff I’ve done to bike over time
Team Alba Front wheel spacers
All 4 wheel hubs painted dark purple
Front wheel hubs shields painted red
polished clutch cover
Tusk competition front bumper
Tusk polished competition nerfbars
Tusk rear brake rotor Tusk super bright white headlight bulbs
Tusk clutch kit
Champion Powersports 8809 spark plug
PRM products full rear swing arm skid plate
Fly racing purple handle bars
Fly racing handle bar grips
Artrax mxt tires
new Yamaha ignition coil
Dg RCM Chrome 3 piece performance exhaust system
Wiseco cam chain
Wiseco 10:25:1 high compression piston
Ek racing X O ring Drive chain
Outlaw Racing aof clutch lever
Yamaha grip seat cover black with a small silver-edge on the back side of the seat with Yamaha written in block letters
Led smoke brake light
Lower rear fender braces painted blue
Blue led light on the back side of the front bumper to light it up in the dark
Gearing is stock 13/40
Story on what happened
Went riding with my girlfriend and some of my friends a few months back we chained our bikes up so no one could take off with them after we left after we got done riding for a little while to get some gas and food to go back out riding again we came back and all of our bikes where took we’re only gone for about an hour
The post Help me find my warrior appeared first on Stolen 911.
View the full article
Similar Tagged Content
these are what i have in my collection ... always looking for more
Linhai 250 - 360 Service Manual
Linhai 260 - 300 Parts Manual
Linhai 260 - 300 Service Manual
Linhai 300 Parts Manual
Linhai 260 Service Manual
Linhai Bighorn CUV Service Manual
By Zacharia Maisonneuve
i have a 1993 timberwolf yamaha and the compression is good and lights work but for some reason the electricity is not going to the spark plug(s)! i got a friend to check it out and they said its no use but im not giving up! please help with this!
By Connor Tuftin
I have a 1988 300 Honda FourTrax, All wheel drive.
My brother and I were fixing up this quad. We put a brand new battery and fuses in and it was running fine until we put the quad into reverse. As soon as it was put into reverse all of the electrical cut out and power wasn't making it to the head unit anymore and both of the brand new fuses popped. We figured there might have been a short from the starter or solenoids, but they are all working properly. At this point we don't know where to start looking for where the short could be. I'm just wondering if anybody has had the same issue or knows of similar issues that could cause these electrical shorts?
By Resurgence Small Engine Inc.
Not satisfied with the commercially available versions, Jonathan recently built an ATV spring compressor.
In this video, he demonstrates using it to remove & re-install the spring on an ATV coil-over shock absorber.
Mistake in video - the coil-over shock is not quite a McPherson strut.
If you are inspired to build your own spring compressor, feel welcome to use any ideas from this video.
Thanks for watching! Resurgence Small Engine Inc.
Recently Browsing 0 members
No registered users viewing this page.