Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
By Matt John
I have a 2017 Polaris Sportsman 570 EFI. Yesterday, I start the machine and it says low power (10.6-10.8). This machine is on its second battery. This is a new AGM battery with 50cca more than stock.
Should I look at the regulator or stator?
By Mark Walters
Hi guys. First post, hope you can help. As above 1991 Honda fourtrax. Starting, running fine until a few weeks ago. Used primarily to put my ski boat in the garage (put 2" ball on front). Any way, had just backed boat into garage, turned off to crank trailer wheel down, when I went to restart got nothing.
No neutral light, no headlights, no reverse light, would not turn over when start button pushed. It would crank and run when I jumped the contacts on the start relay. While running the neutral light will come on, although it is dim and flickers. Reverse light on when running and in reverse.
What I have done to this point:
1. Used jumper cable to ground battery (-) terminal to engine block thinking ground wire from battery to engine may be bad. No neutral light, no start.
2. Applied 12 volts to start relay. Got a loud click like it was making contact. I didn't have the battery/starter cables connected to the relay, but I am assuming it would have cranked at that time.
3. Disconnected neutral switch wire. Grounded neutral switch wire with jumper wire. No neutral light, no electric start.
At this point I am thinking ignition switch vs broken wire in the harness going to the neutral switch (due to dimness and flickering when running).
Any and all suggestions to help track down this issue are appreciated.
By Vybrano Cz
(I don't have manual and there isn't one on the internet)
It's a 150cc ATV, automatic transmission, automatic starter, with zero electric devices.
I have to mount at least some front/rear lights. But for how many watts should I aim in total on entire ATV? You know, for example there are 10/50/200 Watt lights. But it's impossible to order some, when I don't know if I should keep entire ATV under 100 Watts? Under 500 Watts? Under 1000 Watts?
Similar Tagged Content
By Timothy Doerr, Jr
Hey y'all. I have a Yamaha ymf 250 BearTracker. I got this thing for free from people whose son tore it to hell. So it wasn't in great shape to begin with. i.e. no indicator lights (neutral light for instance), no ignition switch or key( wires were twisted together to make it run), get the picture yet?
So when it ran it ran rough and I got it running for a year or two, just something fun for the kids to ride on with me on gravels.
Now just randomly, the start button stopped working so I had to jump the solenoid, then put a temp start switch in. Kill switch would still work.
However, the thing has no spark what-so-ever. I've check continuity through the start button and it shows the contact is working, ohmed out the stator, everything is in spec, the reg/rec tested fine as well. I've replaced the solenoid on the off chance it could've been bad and the cdi unit as well, along the the little solenoid relay unit. I'm still getting no spark. The spark plugs is new as well and the coils to the plug have been tested and are good. I've tested and trouble shooted everything I can on this quad and no luck. I watched countless YouTube "no spark" situation videos and it's not helped. Does anyone have any tips or tricks I could try? Would really appreciate some input on this. Thanks!
I'm new to this site and to CanAm/Bombardier atv's. I purchased this quad local to my area and shortly after started noticing a knocking noise from the bottom end, which I've been told may need a rebuild.
The atv is complete, but I'm now looking to part it out, unless someone knows where I can get the bottom end rebuilt for a decent price.
I can take some pics of the quad and upload. If you need parts off of it, let me know and make me an offer.
Thank you for your help, just got quad for my daughter n needs a little work [email protected]
It's actually a 2002 , just found serial number. Thanks for any help that you can !
I have a really dumb question. My big bear came half apart and I am not sure how the timing chain guide is supposed to sit in there. I have the entire top end cleaned, bored, new piston, gaskets, etc. I do not see anywhere in any manual or thread where it shows how the chain guide is installed or held on place????? Also should it be the same height as the other side???
ok it will start up an run but quits a lot till it gets warm, but has a bad miss an wont idle, I have a brand new Honda carb on it, good gas flow, new plug, but when I let the throttle go below a quarter, it backfires through carb an tail pipe:confused: so it has never had any electrical work or mechanical work done...it just started all the sudden, I'm think it may have ignition coil breaking down, or cdi box going bad...anyone had this trouble before? let me know what you did to fix it. thanks:skeptic:
Recently Browsing 0 members
No registered users viewing this page.