Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Recommended Posts



:confused:

  1. Hello Riders--Thinking of getting a new winch for my ATV and thinking which would be the best winch line to get. Any ideas??? Thanks Chuck

Did you ever get anything?

Share this post


Link to post
Share on other sites

Yes- I bought a 3000lb power pro-And I love it. Install was right on. The thing that took the most time was running the wires as everbody has a different way of doing that. My wires are all out of site.Gives my old Ride a new life and my friends feel safter with my 6oo around. This is as good as a warn and a lot cheaper in price only. Chuck

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Belmontie
      Hi all just started to mount a winch on my kingquad 400 using a kfi mounting plate and the holes don’t line up. The winch is Rhino 3000lb not sure if you have them in the States they’re an Amazon job. I was wondering can I just drill the mount out to make it fit, the holes are fine depth wise it’s just the width trouble is it’s not out a great deal and as the holes are countersunk they will overlap I don’t want a loose winch. Dunno if you can make sense of all that but any help would be appreciated thanks.
    • By Andrzej Polak
      hi
      Where installing a winch to KINGQUAD ltf300?? someone have any pic?
    • By Awakzrx
      Build me a winch on my lakota
      Test it today
      Greetings from Belgium


    • By raybob
      replacing carb,, the bigger line on right side top of carb does it just vent to the air,, cant find where to hook it up to also I want to check the oil and gear oil I checked the oil in motor and the rear end my question is looks like allen plug on left side of motor if you are setting on the 4 wheller, ps it hs a oli leak any help would be great. Ray in kentucky
    • By raybob
      I have it all but can find where the vacuum line on the carb goes its a 2000 suzuki 500 quadmaster I know where the two vent lines go but not the bigger vacuum line goes it has vacuum on this line. need help. Ray
       
  • Similar Tagged Content

    • By Racer944
      Hi Folks;
      Has anybody on here installed a winch on a 2003 Magnum 2x4? I am using a Cycle Country adapter plate (only one I could find), but am having a bit of trouble getting it all to fit properly, and am looking for someone that may have done this install and/or may have some pics of the installation.
      Thanks!
      Eric
    • By toonces
      My mother has just developed a fairly serious case of sciatica, which is a condition where you have some serious leg pain as the result of a pinched sciatic nerve. One of the exercises she does in physical therapy is simply the therapist holding onto her foot and pulling away from her hips as she lays on her back on a table. To replicate this exercise at home they have recommended an inversion table (where you turn upside down and hang from your feet), but since she's not too keen on this idea I'm trying to figure out how to replicate this exercise...which is where the idea of a remotely operated winch comes in.
      I don't really have a wide range of knowledge when it comes to what equipment is out there that can help me accomplish this goal, but I'm not too shabby at designing things and since I just installed a superwinch on my grizz this is the first idea I've come up with.
      Basically I'm imagining using some kind of winch whose rope would be worked through a pulley system that would end attached to a shoe which Mom would put on, lie down and use the remote switch to gently stretch the leg.
      - Winch (if an ATV winch) would be powered by a 12v car battery hooked up to a trickle charger
      - Safety mechanisms would include...
      - a light switch dimmer inline between the 12v battery and the winch so speed can be adjusted.
      - possibly using one of those stretchy rubber exercise resistance bands in the line segment to regulate and ease the pulling
      - a remote power cut off switch paired with the remote 'in/out' switch
      Honestly I could just go ahead and make this system myself, and I'm fairly sure it would work, but I thought I'd bounce this idea off a mechanically minded community to see if there are any ideas how I could improve on the design.
      Since I'm only familiar with ATV winches at this point that's what I've imagined using. But if anyone is aware of a 110v based winch that would be more appropriate, that would surely help in simplifying powering the system since it'll be located indoors. Only requirement for the winch would be that it would need both an in and out function operated by a remote switch. And since the winch would only need to pull between 10-20 lbs it wouldn't need to be nearly as beefy as the ATV type.
      Sorry for the long write up here but I'm certainly glad for your time and open to your opinions and suggestions.
    • By toonces
      Putting in a SW Terra 35 and I've decided the crimp I'm looking at here isn't something I can reproduce so I need to figure out who to take this wire to get the end put back on after I get it shortened to where I need it. Never having delt with wires this big I have no idea who I could go to just locally to get this done. What kind of (electrical?) business would deal with stuff like this?

      .
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...