Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

DMC66

2004-2005 Polaris Sportsman 90 Repair Manual

Recommended Posts

I need a repair manual for a 2004 and a 2005 sportsman 90 and I found a 2006 manual for cheap money. Is it worth getting and will it cover everything for the 04 and 05

Share this post


Link to post
Share on other sites


I think it should I have a 2003 Predator 90 but have worked on an 04 Sportsman 90 and they are really close. Did the 05 have reverse? I know the 03 and 04 didn't.

Share this post


Link to post
Share on other sites

The 05 does not have reverse. Thanks, I am going to change it and buy the manual. The thing sat for a year and now it wont accelerate.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Sonders
      It appears that the Service Manual thread at top of forum is dead as all the links no longer work.  I'm actually looking for service manual for a 2000 KVF300 Prairie that I just picked up.  Does anybody have link to one that they can share, or know where I can find one?  Thanks in advance for any help.
    • By Ryann Racho
      So Id say about 2 years back I bought a 2013 Polaris Sportsman 500 H.O. off of my uncle. It ran perfectly, nothing wrong at all. I usually go mudding with it or just ride trails with buddies. So as you would assume, the quad is quite dirty from sitting for a few weeks.
       
      STUTTERING PROBLEM: I noticed one day out of nowhere that in high gear at 15-20 MPH, I was already maxed out at 4500-5000 RPM  It would get to 15-20 mph, max out on rpms and start sputtering. It sounded like it was basically acting like it couldn’t go any faster than this.
       
      IDLING PROBLEM: I was fucking with the carberator the other day maybe thinking that is causing my sputtering, and now my idle will shoot up to 2600 on start usually, then I will turn the throttle adjustment down to the normal 1400. The rpms with then fluctuate 10-30 rpms back and forth repeatedly, it will then run for about another 30-60 seconds and the RPMs will slowly drop to about 900-1000 RPM and stall out. I replaced the carburetor and everything seems to be working perfect on that, no leaks and what not but it’s still acting strange. Also, I’ve noticed that when looking into the Electronic Throttle Control that two plates that aren’t supposed to touch have to be WAY past touching to even try to fire up. Even when set at a wide open throttle like that, I still have to give it some throttle to get it to fire up.
       
      Here is what I have done so far: 
      Checked the belt and clutch
      Changed out spark plug (Last one was covered in carbon)
      Cleaned the intake and air box
      Replaced the carburetor
      Replaced the inline fuel filter
      Checked that all lines on carburetor are connected into the right spots
      Checked If intake boot was cracked (Not from what I can see)
      Unhooked and reattached new carburetor (About 4-5 times)
      Cleaned battery terminals and battery off
      Shut on and off Gas Line Cutoff Valve
       
       
       
      My next thoughts are that maybe the TPS is fucked up or maybe the Spark Arrestor is plugged with mud. I was thinking tomorrow to purge the exhaust and also check the ohms output on the TPS.
       
      ANY HELP IS GREATLY APPRECIATED. I HAVE BEEN BATTLING THIS FOR WEEK AND REALLY WANT TO GO RIDING. THANK YOU!
    • By Kevin Vlogs
      Hey Guys,
      I'm pretty new to ATV's and never owned a Polaris before. Lately I have noticed that it is very hard to shift from Park to any other gear. Is there an adjustment, or is that just the way they are?
    • By Mike Iadonixi
      Hi my son's 2005 Honda recon engine is seized any ideas on what or where to get another engine 
      Thanks to you guys i fixed my other son's four wheeler last month
      any help would be greatly appreciated
      Thanks
      Mike
    • By Thomas Giles
      I have a 2017 Sportsman 570 SP with a power steering issue. Dealer tells me my machine is one that is not covered by recall and offers no help other than bring it in they will look at it. Any ideas?
  • Similar Tagged Content

    • By oxidized_black
      tag : zukifreak
       
       
       
    • By BChesebro
      Looking for a service/repair manual for a 2000 Polaris 500 Magnum 4x4 
    • Guest Fox300exchic
      By Guest Fox300exchic
      Here's a web site for those of you who might need a manual on your quad. Not all are listed but some are. Its pretty cheap too. You can download it.http://www.shopmanualdownloads.com/results.php?style=A.T.V.
    • By Vertigo
      My non-running '08 450 hour 1450 mile 450 grizzly investment paid off! I paid a buck per cc...yup, $450.
      It smoked mosquito-fogger bad, was missing starter solenoid, a fuse, racks and a few small plastics, needed a rear ujoint, a brake caliper and lever. Popped in the fuse, plugged in starter solenoid and a carb clean out came next.  After an oil change, seafoam treatment, and reseating rings by very hard and hot riding towing a 5' disc for two hours, it completely stopped it's bad habit! Changed oil and filter again (went synthetic), and have put a hundred hours of trail-busting and mountain climbing, everything is working perfectly, and not using any oil.

      My current task is to repair the winch, if possible. It was crammed jam-packed full of dust, rust, and mud.
      I disassembled it, cleaned it completely, found nothing overtly appearing broken, but it feels like the knob for freewheel/engage is "sticky".
      I mean, REALLY sticky-the Mitsubishoid rhombus-triad looking mechanism appears to not release, unless I pull or tap on it.
      I've not yet reassembled it, want to find out if the disengage action is normally this "sticky".

      Anyone have experience with this? How about a schematic, or manual?
    • By kwterrell
      I am in need of a service manual for a 1995 Polaris 300 4x4
      Thanks
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...