Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

lawehage

2003 Kawasaki Bayou 250 Carb Setting?

Recommended Posts



DUDE

IF IT IS A KLF250 A1

GOES LIKE THIS

(A BIT MESSY, BUT SECOND NUMBERS ARE FOR KLF250A2)

Throttle Case and Cable

Throttle Lever Free Play 2 ∼ 3 mm (0.08 ∼ 0.12 in.) – – –

Carburetor

Make/Type MIKUNI VM24SS – (A BIT MESSY, BUT SECOND NUMBERS ARE FOR KLF250A2)

Main Jet #115 #120 – – –

Main Air Jet 1.0 1.8 – – –

Needle Jet O-6M O-2M – – –

Jet Needle 5GN64-1 5GN74-1 – – –

Pilot Jet #30 #22.5 – – –

Pilot Air Jet 1.3 1.0 – – –

Pilot Screw 1 1/2 turns out 2 1/2 turns out – – –

Starter Jet #45 – – –

Idle Speed 1 300 ∼ 1 400 r/min (rpm) – – –

Service Fuel Level 5 ± 1 mm (0.20 ± 0.04 in.) – – –

below bottom edge of

carburetor body

Float Height 22.6 ± 2 mm (0.89 ± 0.04 in.)

DOESN'T SAY WHAT NEEDLE POSITION, BUT USUALLY 3rd, (MIDDLE)

HAVE FUN

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dwight Williams
      Hey everyone, I've been scratching my head over this for most of the day.  I bought a couple of Bayou 220's, got them running (they've both been sitting), and started tweaking and fixing small things.  One of them is mostly done, the other had an aftermarket carb on it and I've been trying to sort that out.
       
      Anyway, while adjusting the carb it died a few times, I restarted and moved on until it died and wouldn't restart.  I figured maybe I'd flooded it or something - after further attempts I realized I had no spark.  Since I have two identical machines I have many parts at my disposal.  I've swapped the CDI, spark plug and coil with no luck.  I have good resistance readings from the stator and pick up (135 and 110 respectively),  I don't have a peak voltage meter but I measure around 53VAC on the stator when cranking.  I have a 4 wire stator, not an alternator like the newer ones.  Grounds look good, I've checked the kill switch by verifying that it and the ignition switch grounds the black/yellow wire to the CDI.  I can turn the engine slowly and see the pickup short the meter as well, seems normal right?  So far everything I've checked looks the same on both machines.  I've got the service manual and wiring diagrams.  Do these readings make any sense?  I'm obviously missing something but I'm stumped.  thanks!
    • By Jeff Comstock
      Ok, so I had no spark issues and foundy coil was bad. Bought a caltric coil, put it on and fired right up...for bout 20 minutes then it backfired once and again, no spark. I put it on my buddies 300 and it runs.  Checked my cdi the same thing, but still no spark. Now I got my old coil and  was ohming it and got reading of .01 on primary and 11.89 from POS to plug ( meter set on 20k ) new coil reads same primary but 12.83. what gives? It tests bad but runs my buddies 300, helllllllpppp
    • By Andrew Baker
      I need help with wiring on a 1998 (I think, 10th digit of the VIN was W) Bayou. I'm not getting spark, I'm pretty sure it is due to grounds being off because the harness is pretty hacked as far as the electric start and charging system goes. I'm needing a good wiring schematic. I found one online and there are a few things that don't add up on it so I'm skeptical that it is really for my year and model. Any help would be appreciated. Thanks. 
       
    • By colin james
      View File 2017-2019 sportsman 450/570 with eps factory service manual
      This  is the factory service manual for the 2017-2019 factory service manual for the sportsman 450/570 with electronic power steering 
       
      Submitter colin james Submitted 09/06/2018 Category Polaris ATV  
    • By Kaj Colum
      Pushing the start button the engine turns and will forever without starting. But if I use the kick start it will start with one or two kicks everytime, any idea as to what is going on. New good battery and coil, I'm ready to try anything. It's a great bike, but this is getting anoying. Thank you.
  • Similar Tagged Content

    • By Chayse Hill
      I have a 2003 LTZ 400 that i bought a few days ago. The quad was running fine until last night. I let my brother ride it down the street and back and i didnt notice anything etong with bike. Then my neighbors friend came over and said "can i ride it?" I said "sure" so he ripped it down the road all fine and when he got back it died right in front of us. My brother said it was dieing on him also. He also said that he wasnt using the clutch to shift. I told him he was an idiot. Im throwing that in there incase that caused a problem as well. But today i go to check it to make sure its getting fuel which it is and replaced the spark plug incase it wasnt getting spark but it is. So i started it and it was having a problem starting then i got started and was reving at idle high. So i took it around the block and it died on me a little bit down, so i try to restart it and it started so i kicked it into 1st and it kinda launched on me and started going with the clutch all the way in. Then it died right after and wasnt running right during that process and was idleing all over the place and just died and now i cant get it started it again. Before it would start without the choke or priming it. It would start real quick now i cant figure if it needs to be rejetted or something else. Air filter looks clean also. But any help would be gratelly appreciated!
    • By arvellaspoon
      When I push down on the rear brake pedal, it makes the left hand brake very sloppy. Is there a way to adjust that? I have a 2007 Suzuki Vinson
    • By Kyboy
      Iam looking for help seperating the rear brake drum and the cover. Any suggestions would be greatly appreciate
    • By Jers
      I need to know what I have and what tire really go on it, Mine has 24x11x10 on the back and 22x8x10 on the front and I need new tire but I don't think are the right size. Also I can't find the model number listed but it looks like a 250 quadrunner 2wd and I think it is a 1987 maybe, can anyone help me, also I it has a rich running sound and I put a carb diap in it and cleaned the carb. is there a jet needing replaced?
    • By HomerBill
      I have a 1996 King Quad 300 LT-F4WDX ATV
      I tried to install a carburetor rebuild kit but there were no instructions and I am unable to find them. Anybody know what the "Pilot Screw" is set at? The engine starts but seems to be flooding- very difficult to get the rpms up and engine acts flooded.
      I set the screw to 3 turns from closed. It is called the "Pilot Screw" on exploded views of the carb.
      It is a Mikuni BST 31 single carb.
      Thanks for any help!
      Bill Roberts
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...