Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

mouche

2003 yamaha kodiak 450 fenders

Recommended Posts

hey im new to the site and got a few questions if anyone can answer them.

i own an 2003 yamaha kodiak 450 auto and am wanting to replace the fenders on it but i am wanting to put black fenders on it. The closest year model i found with black fenders is an 2005 and i was wondering if these fenders would fit and what i would have to do to make them fit? any and all help would be appreciated, thanks.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By JacobSlabach
      got 7 atvs off CL recently for a good price.  one of which is a yamaha warrior.  anyone know where the vin is printed on this bike?  Haha good place to start as I do not know year or size yet.  The former owner says needs exhaust ans and clutch work.  he said it ran fine until the clutch cable broke and then I couldn't get the new cable adjusted right and it would grind gears.  things I see:  clutch cable locked up again, no brakes, carb leaking (green with algae around the bowl and has gelled gas stalagtights on it), aftermarket exhaust melted the airbox so I need something different and a new air box.  I would like the use the current exhaust if I can but I have a feeling its a redneck fix as it looks like there is an ace bandage holding it to the exhaust pipe (its an aftermarket slip-on exhaust), so I'm not sure about that- lets get the bike running first.  also, battery (looks brand new, what a shame) is dead, 0 volts.  Otherwise, bike looks to have not been wrecked, and plastics are ok (it sat outside under a 'tarp' for 3+ years since it was run last).  any tips and advise on where to start first would be awesome as this is my first clutched bike (manual).
      the clutch is my main concern- I've never rode a clutched bike so I dont even know what its supposed to feel like.  lol I'm spoiled on my automatic polaris 
    • By Admin
      Looking for Yamaha ATV VIN (Vehicle Identification Number) Number Decoders? Once you find your ATV VIN number off the tag on your Yamaha ATV, you can go to all kinds of websites that have VIN Decoders available. The best ones are backed by the Yamaha ATV manufacturer, however there are plenty of aftermarket Yamaha ATV VIN Decoder websites on the web. This topic will stay pinned and if you find any to add, please do it with a reply. 
      The following Yamaha ATV VIN Decoder websites are available where you can just enter your VIN number and it will shows you some of your ATV model details:
      KBB.com https://www.kbb.com/vehicle-history-report/ 
      CARFAX https://www.carfax.com
      autoDNA https://www.autodna.com
      VinAudit http://www.vinaudit.com/
      decodeTHIS https://www.decodethis.com
      VINCario https://vindecoder.eu/
      NICB Theft Check https://www.nicb.org/theft_and_fraud_awareness/vincheck 
       
    • By Nigel Bourn
      I’ve just bought one of these and came here looking for a service manual
      Mine has an air cleaner that I don’t seem to be able to find, it has round ends with square tabs on them, any ideas?
       
    • By Sonders
      Hey guys.  New guy here with my first Yamaha quad.  Traded for an 01' Kodiak 400 that needs some tlc.  It was running but idle is off, missing some hardware here and there, none of the lights work on instrument panel and front brakes didn't work were the main things that jumped out at me.  I drug it home and have started tearing into it.  Started with fresh oil change and flushed the dirty brown coolant and replaced with fresh coolant.  The carburetor is missing the side cover for the throttle cable and I don't see where I can buy just that cover without buying a complete carb, so went ahead and ordered a new one (hasn't arrived yet).  the Starter relay solenoid was crap and had to mess with it to get it to start half the time so replaced it.  I have a few questions as I'm going through this quad that I'll list below.
       
      1. It has a cut plug on wiring harness under the instrument panel.  Can anyone tell me what this plug goes to?  There currently is not a plug running to the 4wd indicator light on instrument cluster so I'm wondering if 2 of the wires are for that possibly??
       
      2.  Also in the front, there is a air duct under the rack and black plastic panel that runs down to the engine case.  Is there supposed to be some sort of cover or anything over it?  I looked online at parts diagrams and couldn't even find this duct or the duct that runs up by taillight in any of the diagrams.
       
      3. this fuel line on top left side of carburetor; is this what goes to the gas tank cap or is it just a vent line for carb?  Follow up question, where does the line that comes off of the gas tank cap go to?
       
      I'm sure I'll have many more questions as I work through this thing.  Thanks in advance for any replies.
       



    • By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!
  • Similar Tagged Content

    • By Chayse Hill
      I have a 2003 LTZ 400 that i bought a few days ago. The quad was running fine until last night. I let my brother ride it down the street and back and i didnt notice anything etong with bike. Then my neighbors friend came over and said "can i ride it?" I said "sure" so he ripped it down the road all fine and when he got back it died right in front of us. My brother said it was dieing on him also. He also said that he wasnt using the clutch to shift. I told him he was an idiot. Im throwing that in there incase that caused a problem as well. But today i go to check it to make sure its getting fuel which it is and replaced the spark plug incase it wasnt getting spark but it is. So i started it and it was having a problem starting then i got started and was reving at idle high. So i took it around the block and it died on me a little bit down, so i try to restart it and it started so i kicked it into 1st and it kinda launched on me and started going with the clutch all the way in. Then it died right after and wasnt running right during that process and was idleing all over the place and just died and now i cant get it started it again. Before it would start without the choke or priming it. It would start real quick now i cant figure if it needs to be rejetted or something else. Air filter looks clean also. But any help would be gratelly appreciated!
    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By dyyjrr9
      I just got a 1991 Yamaha Moto 4 for my son and I am looking for a service repair manual. I know that the timing chain needs replaced.
    • By alexcross324
      Hi all, I try to find this manual in the threads but you have a lot of stock here
      Cannot find this particular manual.
      I found it for YFM200 but not sure if they are the same.
      Thanks if you could help me with that.
      Im new here so if I did something wrong, please tell me.
    • By ej200421
      i was wondering if i could get some help. i been trying to locate where the fuel and air adjustment screws are located on my 95 kodiak 400. i think i found the fuel screw.. i know where the throttle adjuster is but i cant find the air screw. or is there an air adjustment on these carbs?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...