Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

quadrunner250

1999 Suzuki Quadrunner 250 High Idle

Recommended Posts

I have just bought this and don't have any problems but the idle is really high then it is in neutral and i don't know where the idle adjustment is. I would also like to know what kind of oil i should put in this ATV because he gave me a oil filter so i could change the oil and i forgot what oil he told me to use.

Share this post


Link to post
Share on other sites


There should be an idle adjustment screw or rod to turn on the carb. Check your choke also.

You can use any 4 stroke atv oil or go to any atv dealer and they can sell you some. I use 4 stroke Valvoline oil.

* Adjusted your thread title.

Share this post


Link to post
Share on other sites
i looked and saw on the cap it says 10W40 so ill get some of that.

you wouldn't by chance know where the idle screw is. I have check the choke

Make sure you get oil for wet clutches.

Share this post


Link to post
Share on other sites

There should be a plastic knob coming out from the left side of the carb, that should be your idle adjustment. You may also want to try adjusting the fuel screw which is located on the underside of the carb toward the front. If neither of those helps or the machine still doesn't run right, you need to start checking for air leaks by spraying carb cleaner around the intake area of the motor.

Share this post


Link to post
Share on other sites


Buy The Repair Manual For That Machine - It Should Show Where The Idle Adjustment Screws Are - It's Usually The Top Screw On The Side Of The Carburator

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By LOGAN WARNER
      Hello everyone, I’m new to this forum. I have a 98 king quad 300, I cannot get it to run right. It will start up and run for a little bit but then it starts sputtering when you give it throttle. It appears to me that it is getting to much fuel. 
      this is what I have done to it: new carburetor, new fuel filter, adjusted the valves.
    • By Dan Tressler
      I have a 2018 Sportsman 570 SP Hunters Edition. I bought the quad new in August of 2018 and put around 20 miles on it with no issues. In early January of this year the quad was acting as if it had a bad battery even though it had been plugged into a tender. I checked the battery and it tested well so I took it to the dealership for warranty service. They had it for almost a month. They determined the quad had a bad EPS unit and swapped it out. Then they told me that the wire for the EPS needed to be updated as they could not program the new unit with the old wire. After the wire came in dealership told me they were still having troubles programming. After another week and a half they told me that they had consulted several times with engineers from Polaris and found a workaround and that the quad was ready for pickup. I contacted Polaris to inquire about the warranty being extended as it was in the shop for a month. They extended the 6 month factory warranty for an additional 3 months. I picked the quad up and the dealership said that the 2018 SP editions were known to have issue a with the EPS units but believed that they had fixed mine. I had it back for around a month and took it out a couple times for short rides and everything seemed fine. I parked it again for a few days and when I went to start it same issues (acting like the battery is no good and won’t start, when I jump start no power steering). Took it back to dealership and waiting to hear what the diagnosis is this time as well as their plan to fix this permanently. Just wondering if anyone else has had issues similar to mine or can give me some advice. Thanks in advance!
    • By Shane Pillar
      Talk about what kind of atv you have and what you do with it.
    • By matthew smith
      I have a honda recon 250 that i just bought. the compression is around 90 needs to be rebuilt. im getting into rebuilding it took apart the top end no problem except for the cylinder walls. as shown in the pictures. the way the piston sits in the cylinder is if you were sitting on the wheeler the skirt on the piston is left to right. so the wrist pin is front to back. which is where the two marks are in the cylinder. so that means the connecting rod is making the piston slap the cylinder on the wrist pin side which seems like a weird way for the cylinder to be moving. not natural. now the connecting rod has slight play left to right but not up and down. ive talked to a few people they say it might be the roller bearings in the connecting rod where it meets the crankshaft. but the play it has is not that much. im just looking for some more input before i start splitting the case. 




  • Similar Tagged Content

    • Guest
      By Guest
      Ok...I'm gettin' me juevos ready to do an oir filter clean....
      Went to my local harley/quad dealer and he had me purchase the No-Toil kit (Cleaner, Air Filter Oil, Rim Grease)
      What I've read is that the No-Toil cleaner will NOT clean
      other oils off air filters....just the No-Toil oil....
      So, I've also read that others have cleaned their air filters
      in the kitchen sink, used gasoline, or used flash solvent....
      Looking for advice as I've mentioned I'm very mechanically
      DECLINED!
      I'm going to wash the air box seal in the sink and give it a good dry....
      One more thing......No-Toil or Bel-Ray for filter oil?
      Thanks!
      -TD
    • By toonces
      Have a 2011 Grizz 700 and for the diff oil the manual calls for SAE 80 API GL-4 hypoid gear oil. I'll be using Mobil 1 synthetic but as it comes in two different weights I'm not sure which one to get....either the 75W-90 or the 75W-140.
      The 75W-90 is listed as GL-5 and is recommended for use in 'high-performance vehicles like SUVs, vans and light duty trucks.' The 75W-140 weight is also GL-5 and is recommended for 'high-performance vehicles including sport utility vehicles, vans and light-duty trucks.'
    • By toonces
      Have a 2011 Grizz 700 and for the diff oil the manual calls for SAE 80 API GL-4 hypoid gear oil. I'll be using Mobil 1 synthetic but as it comes in two different weights I'm not sure which one to get....either the 75W-90 or the 75W-140.
      The 75W-90 is listed as GL-5 and is recommended for use in 'high-performance vehicles like SUVs, vans and light duty trucks.' The 75W-140 weight is also GL-5 and is recommended for 'high-performance vehicles including sport utility vehicles, vans and light-duty trucks.'
    • By Jers
      I need to know what I have and what tire really go on it, Mine has 24x11x10 on the back and 22x8x10 on the front and I need new tire but I don't think are the right size. Also I can't find the model number listed but it looks like a 250 quadrunner 2wd and I think it is a 1987 maybe, can anyone help me, also I it has a rich running sound and I put a carb diap in it and cleaned the carb. is there a jet needing replaced?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...