Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

chadtheman

HELP!!! Stalling Problem w/2005 Suzuki King Quad 700

Recommended Posts

here's the deal, was riding it all day long, i started noticing a random popping noise coming out of the exhaust pipe, was anything to loud but would randomly do that. After about 3 hours of riding the bike started to hestiate, did that a few times so i just started to give it more gas and then i came to a stop and it was like the bike was misfiring or something and then it would stall. It was doing that for a few times, would keep stalling. Then i tried to start it up and it wouldnt start just kept cranking and cranking. then if i turned the key off and let it sit for a minute or to it would start back up. Then when i continued to ride it seemed like the bike didnt have any power and kept wanting to stall. i would put it into neutral and rev it up and it seemed to do a little better. Not sure what the problem is. I havent messed with it yet but i figured i would put this on here first to get some quich pointers or to see if anyone else had this same problem. I have no fi light or anything comming on.

Edited by Ajmboy

Share this post


Link to post
Share on other sites


Could be a few things.

Check your air filter and make sure it's not clogged.

Could be a bad injector.

Could be a bad fuel pump.

* Added manufacturer to your thread title.

Share this post


Link to post
Share on other sites

I agree with Ajmboy, first thing I would check is the air cleaner. You have described exactly what happens when the filter gets wet or dirty on my LTR.

Share this post


Link to post
Share on other sites

Did you ever find the source of the stalling issue ? Im asking because only today I encountered the same issue. I went for a 40 mile ride and the bike stalled about 1/3 distance. When shut down and placed in Neutral it would start and continue for a distance depending upon how hot it got. Ive checked coolant, air filter and now have removed the spark plug but nothing obvious comes to light. Id appreciate any clues you may provide. Thanks in advance.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Chase Cook
      Hi I just got an Polaris sportsman 500 4x4 ATV the other day. I got it real cheap but I started to go into it because it didn't have compression so I bought a new piston and ring kit for it and installed it, but now when I try to start it all it does is shoot fire out the exhaust or the intake of the carburetor. And a timing is top dead center.;I think I can't really tell another way if it is or not. when I put it together I made sure to piston was on top and the cam lobes where facing down where are the cam sprocket is facing up. It has gas and spark. It did start a couple minutes ago but it didn't stay running and now it won't start. Do you think the valve need to be adjusted more to close better?I'm fixing to try that out and if that don't work what is the problem? Also I made sure everything was together good and right and change the oil and changed out the radiator fluid.
    • By Kawiherder
      It starts and runs Ok but after a while the temp gage lights up and the fan fails to start.  Any suggestions on where to start looking would be helpful.  Thanks
    • By Adrian Ciotinga
      As the title says, I hear a knocking noise coming from the CVT cover. It’s fairly quiet (never noticed it before now) and the only reason I paid any attention to the cover is because I went to start the quad and heard a clunk (possibly from being between neutral and drive). As far as I’m concerned, it only happens in neutral as I could not hear anything when riding it. It’s quiet enough that I feel it might be just a normal noise. Any input would be greatly appreciated.
    • By JacobSlabach
      got 7 atvs off CL recently for a good price.  one of which is a yamaha warrior.  anyone know where the vin is printed on this bike?  Haha good place to start as I do not know year or size yet.  The former owner says needs exhaust ans and clutch work.  he said it ran fine until the clutch cable broke and then I couldn't get the new cable adjusted right and it would grind gears.  things I see:  clutch cable locked up again, no brakes, carb leaking (green with algae around the bowl and has gelled gas stalagtights on it), aftermarket exhaust melted the airbox so I need something different and a new air box.  I would like the use the current exhaust if I can but I have a feeling its a redneck fix as it looks like there is an ace bandage holding it to the exhaust pipe (its an aftermarket slip-on exhaust), so I'm not sure about that- lets get the bike running first.  also, battery (looks brand new, what a shame) is dead, 0 volts.  Otherwise, bike looks to have not been wrecked, and plastics are ok (it sat outside under a 'tarp' for 3+ years since it was run last).  any tips and advise on where to start first would be awesome as this is my first clutched bike (manual).
      the clutch is my main concern- I've never rode a clutched bike so I dont even know what its supposed to feel like.  lol I'm spoiled on my automatic polaris 
  • Similar Tagged Content

    • By mikeexplorer
      Wiring diagram for 2007 Arctic Cat 700 EFI 4x4
       
       
    • By Admin
      View File 2007 Arctic Cat 700 EFI 4x4 Wiring Diagram
      2007 Arctic Cat 700 EFI 4x4 Wiring Diagram
      Submitter Admin Submitted 06/29/2019 Category Arctic Cat ATV  
    • By Admin
      2007 Arctic Cat 700 EFI 4x4 Wiring Diagram
    • By x
      It's time to replace the shocks and struts.  Looking for some stiffer springs than the OEM as I use this for farm work and I put heavy loads on the rear and haul small trailers frequently.  I've seen a couple aftermarket offerings that say they're 10% or so heavier duty.  Any other options for something a little stronger / stiffer?  Thanks.
    • By LMI
      The saga of the fan continues.
      The Pin attempt in the fan shaft failed.  I then moved on to trying to weld the fan hub to the fan shaft.  I took it for a run the weld broke.  Now it was truly F'ed.  To recap the dealer price, they want $400 + CND for a replacement fan assembly.
      I searched all sorts of after market places and no one carried one.  Ebay had some used ones but they were $120 USD + Conversion rate for something as old as what I have.  I went to Amazon and eventually settled on this.
       
      amazon link
       
      What I found... and was amazed... was that the fan mounted to the Suzuki fan assembly bracket.  I was prepared to manufacture my own mount conversions...  It also came with "Harpoon mounts" (nylon zip tie like things that go straight through the rad.   Anyways it mounted to the original bracket. It fit perfectly.  Cut the electrical plug off replaced it with the Suzuki... all good.  Let the quad heat up, thermo coupler kicked in the fan circuit, polarity was right... all was good....  Fan is under the circuit fuse rating.  
       
      so I finally have a solid fan solution.  $34 CND vs $400+ CND
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...