Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

travis1995

1988 Yamaha Warrior exhaust blows out of carburetor

Recommended Posts

My dad said if I wanted a four wheeler I had to build it. Well it took me over a year to do it but now I am having troubles with the carubretor. My dad and I tried to rebuild it and we took our time doing it but the problems we are have are: we are getting exhaust blow out of the carburetor and exhaust out of the tailpipe it back fires at a high rpm and when we put the air box on the carburetor we have no acceleration. We have stop at a couple dealerships but they don't work on anything as old as my 88 warrior and have no idea. Can anyone help please. You can email me at [email protected]

Tags: Rebuilt Engine Carburetor

Share this post


Link to post
Share on other sites


My best guess is that your valve timing is off. Could be the ignition timing too, but I am leaning more toward valve timing.

Edited by DirtDemon

Share this post


Link to post
Share on other sites

Sounds like its either way too lean, i would check that first orpossibly something in your valve train. Check all your jets and everything in the carb and make sure they are all correct. If you have a stock engine with a stock airbox, your jetting should be stock with the needle clip about in the middle and the air fuel screw about 1.5 to 2.5 turns out to start.

If its still a mess, just pop your rockerbox off and cheak to see that the cam timing and ignition timing are correct. Honestly though it sounds lean to me.

Be patient and if you dont have a manual, buy one and go through it step by step, you will get it right and it will be worth your effoerts !!!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By therealjohnsmith
      I just bought these in the fall as a pair and of course they were running awesome with no problems at that time.
      One of them now will only start with starting fluid. It runs great once it's started, but absolutely refuses to start without a squirt of the good stuff.  The other one starts just fine, but dies after it gets warm. The only way to keep it running is to keep the throttle up. It won't run at an idle, and keeping it running has the throttle too high to shift.  Any ideas or suggestions are very much appreciated!!!
      Thank you,
      John from Shelley, Idaho
    • By cheatmaster300
      I purchased a quad with engine problems. The previous owner had pulled the motor and pulled the valve cover but decided to stop. I have done Arctic Cat top ends before but have never worked on the bottom end so any advise would be appreciated. What I have found so far is the connecting rod bearing is completely gone and some scoring on the jug walls. What i'm wondering is if anybody here has worked on these and if so did you replace all the bearings or just the ones that were for sure bad? Also is the 2006 Suzuki King Quad 700 motor exactly the same? It seems Suzuki parts are a lot cheaper to buy.
    • By YamahaGrizzly
      Damn guys its been a minute since posting here! Hows everyone doing with covid-19 floating around? I hope everyone is staying safe and washing your hands! 
       
      Its been a minute! Myself and Jon got requested to do this video only 1000 times! Eventually Finntrail started a new Blog and got some of their sponsored ATV riders make a video for them so here is ours! We got lots of parts on our Yamaha Grizzly 700 everything you see on my Yamaha Grizzly 700 you will also see on Jons Yamaha Grizzly 700. Thanks for watching and make sure you Like, Comment and Subscribe!
       
      P.s I also said the 1992 Big Bear had a belt lol
    • By gillies_robert
      Good evening just like to share my current project, which is #8 in my fleet of Polaris.
       

  • Similar Tagged Content

    • By Guythis448
      Looking for help on wiring up stock wiring harness specifically for a '88 Honda TRX 300 
      If anyone could drop a link or send me a PM it would be much appreciated 
    • By wHarmon
      Our 1988 Yamaha Terra Pro is finally seeing the finish line of becoming our new bush hogging tractor! I've had the terra pro for almost 2 years... we had great intentions, but after removing the fenders, fuel tank, and the carb, we let it sit up. Shame on us! However, the terra pro is cranking today. We cleaned the carb, figured out what goes where and where did that screw go! She smokes like there's no tomorrow, but that's okay! The only issue right now is getting all these lines hooked back up to the carb right! There is 5 lines to hook up to this thing!! And in our moment of drinking and removing parts, we cant remember how they go back on. I've found several diagrams online, but none showing the overall schematics of all the lines! If anyone has a service manual, or any way of helping us figure out what goes where I would really appreciate it!! I can attach pictures later if it'll help!
    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By dyyjrr9
      I just got a 1991 Yamaha Moto 4 for my son and I am looking for a service repair manual. I know that the timing chain needs replaced.
    • By alexcross324
      Hi all, my second post here
      I got an old Yamaha 88 moto 4 and I have a problem with my overflow hose from the carb.
      When I put the gas switch to ON a big amount of gas is leaking from the overflow...so I start using my quad with the gas switch to RESERVE wich is also leaking but less than in ON position.
      I dont ride a lot..but in a week I empty my gas tank.
      Strange.
      I never clean my carb because Im new to quad world and dont have the service manual...so I need you point of view.
      Thanks guys!
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...