Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

tikaani

1994 polaris explorer 300 transmission

Recommended Posts

I just bought this machine and it wasn't shifting into gear cleanly. I have been fiddling with the rods from the shifter to the transmission and now have reverse consistently, but can't get forward gears. I had lo forward before I start messing. Is there a trick? Some guideline to adjust to? Thanks for any help.,

Share this post


Link to post
Share on other sites


Can you see anything that may be bent or loose? If all the linkage is tight and in order, I would mess with the adjustments untill you get it or you figure out that it can't be adjusted. The only thing I can suggest is to make adjustments one thing at a time, don't mess with a buch of adjustments at once, it is harder to pinpoint the promlem that way. If it can't be adjusted with the shift rod adjustments, you may have a problem with the gear selector assembly. Your problem could also be internal, something like a bent shift fork or internal shift shaft. Hopefully someone who knows these machines better will chime in with something, until then, good luck.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By JacobSlabach
      i know this isnt an atv but same type of thing.  I have a riding mower im fixing and selling for my aunt and it has a dead battery.  i jumped it off my atv and when i turn the key nothing at all happens.  i tried jumping the relay still nothing.  this is with the seat down.  you wouldnt think this mower would have issues as its a top-of-the-line brand and almost brand new (aunt found it for a good price, still got tits on tires, just sat for a couple months in a mechanic shop
    • By 220Bayou
      What weight gear oil for this machine?
      80w90?
    • By Mark Hill
      Hi everyone bought my son a project wheeler and got it up and running but it won’t go in reverse.  It’s a 2002 2003 bombardier rally 200. I have been searching for causes on line had have a couple ideas what it may be but still looking  for advice and help
    • By Mark Walters
      Hi guys.  First post, hope you can help.  As above 1991 Honda fourtrax.  Starting, running fine until a few weeks ago. Used primarily to put my ski boat in the garage (put 2" ball on front).  Any way, had just backed boat into garage, turned off to crank trailer wheel down, when I went to restart got nothing.  
      No neutral light, no headlights, no reverse light, would not turn over when start button pushed.  It would crank and run when I jumped the contacts on the start relay.  While running the neutral light will come on, although it is dim and flickers.  Reverse light on when running and in reverse.
      What I have done to this point:
      1.  Used jumper cable to ground battery (-) terminal to engine block thinking ground wire from battery to engine may be bad.  No neutral light, no start.
      2. Applied 12 volts to start relay.  Got a loud click like it was making contact.  I didn't have the battery/starter cables connected to the relay, but I am assuming it would have cranked at that time.  
      3. Disconnected neutral switch wire.  Grounded neutral switch wire with jumper wire. No neutral light, no electric start. 
      At this point I am thinking ignition switch vs broken wire in the harness going to the neutral switch (due to dimness and flickering when running).
      Any and all suggestions to help track down this issue are appreciated.
      Thanks
       
    • By Belmontie
      Hi bought this quad with a few leaks and other issues which thanks to excellent advice from these forums I thought I’d sorted them till I washed it down and found oil underneath. 
      It is coming from the seal around the gear changer pedal as it looks like someone has banged the housing flat on one side. Knowing how easily aluminium is broken I don’t wanna risk tapping it back into shape. Would a new seal fit or would the distortion of the housing render it useless.
      thanks in advance 
  • Similar Tagged Content

    • By Reece K.
      I just recently bought a 1994 Yamaha Timberwolf 4x4 from a buddy who had the wheeler sitting in his garage for 7 years. I got it home and fired it up pushed it out of the garage and tried to shift it and it wouldn't shift. First it would click like it was shifting, but the wheeler wouldn't move and when I hit the gas it revved up like I was in nuetral. After trying some more it became stuck in 1st gear and wouldnt shift at all. But it later broke loose agian and acts like it is in neutral again. I took the motor off the machine to make it easier to work on.After asking friends they were convinced it was a clutch problem but after opening up the casing for the clutch I don't see anything out of the ordinary and am concerned that it may be a transmission problem. Any help would be greatly appreciated thank you.
    • By RoxanneRoseReid
      Need a polaris manual for a 1994 2 stroke 2/4x4 quad free. can you please post a link I can click on Thank you. Roxanne
    • By buzzar56
      I am looking for a free repair manual for a 2003 Polaris sportsman 500 ho atv. all the posts on here lead me noplace
      thanks fred.
    • By Weldingrod47
      Trying to change front wheel bearings. I removed the cotter pin and castle nut. Hub won't budge. Is there an additional retaining clip? Seems to be one of those push on type that barbs on the thread of the spindle. How do I remove it?
    • By warkcol
      I am having an issue where it sounds like the gears are slipping if I hit the throttle really hard and also after letting off when the engine brake is applied. Also, the drive train that goes to the front also rides again the gear shift box. I will attach pictures and a video here shortly.
      Thanks in advance!
      [ame]
      [/ame]https://postimg.org/image/cdlu6fza9/
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...