Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Cashman

Cab questions

Recommended Posts

Hello everyone, I am a new member, old guy with a few toys and a lot of questions.

I have been riding a Sportsman 500 since '02, and enjoying it immensely, but have recently stepped up to a Ranger, '07 XP, 700. I like the machine, and have had some great experiences and rides. I am also a hunter, and decided to try a soft cab(polaris stock) for the Ranger this winter for an elk hunt. While I appreciated the warmth and shelter from the elements(snow and sleet), I found a problem that I thought perhaps someone on here has had and solved. The doors do well at protecting one from the weather, but are not user friendly. The "latching system" consists of what seems to be a battery box cover tie-down rubber bungee/metal hook arrangement that is difficult to open or close, due to the positioning of it, and the door opens similar to a normal vehicle door, causing exiting problems due to the side safety bar. Has anyone else had this problem and did you find a solution? Any help would be appreciated.

Share this post


Link to post
Share on other sites


Welcome to the forum, I wish I could offer some advise, but I have never even been inside a Ranger. Hopefully someone has something for you. Good luck.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By mywifeknowseverythin
      Just out of Curiosity....What hauls your Toys.....
      If you have Questions about Toyhaulers, Flat bed Trailers, Utility Trailers Etc, Etc, Etc,....Ask em.....If I or anyone else here doesnt know the Answer.....I will Find out for you....
      If you have pictures of Trucks and Trailers you have owned in the past to haul your Toys post em up.....
      I think its interesting what people do to get their Toys out to the play ground...
    • By Rushville
      2000 Sportsman 335 lost the speedo functions. Don't need the speedo but need AWD.  Is there a wiring bypass that can be done to activate AWD ? 
    • By Redneckracing14
      I currently live in indiana i have 2 atvs that are titled and registered in indiana i want to take them to kentucky to do trail riding buti want to do to it perfectly legal do i need to register it in the state of Kentucky to and will the permit at whatever place im riding at cover me ive looked all over net cant really find a answer thanks
    • By Cory
      Hi everyone new to the forum.  I’m looking to upgrade my son from an Eton brand 50cc atv. It’s 2 stroke and can take awhile to warm up in the cold months. Anyway, I found a mint looking 2004 Polaris Sportsman 90 ($1400)and a few 2015 and 2016 Arctic Cat DVX 90 atvs ($1800) in my area.  Just wondering if I’m crazy for considering the Sportsman since it is 10 years older. Basically    Are the newer atvs 2015/ 2016 made any better or worse than the 2004 atvs? I know it is hard to say without seeing them and testing them out, but any experiences in general may help me to decide. Thank you


    • By JacobSlabach
      Got a 04 Sportsman 500 that wasnt running- owner said it needed a stater and a new battery.  It ran rough (been sitting out in the weather for a while).  A friend and I started by adding a new battery and it would start barely with the choke and his hand over the air-filter.  I decided to install the new battery in the holder on the side.  we had it on the rack because the old on was still in the bike.  I tried to be nifty by turning the battery to put the terminals in an easier spot to get to, but forgot to reverse the cables too.  In a sentence, I reversed the positive and negative on the battery like a dummy.  When we discovered my mistake and corrected it, we turned on the bike, but the display did not light up and the key did not turn on the starter.  jumping the solenoid worked the starter, so we thought the solenoid just burned up when I reversed the pos and neg...  new solenoid and no difference.  what have I burned up?  Also, the shifter does not seem to do anything in the trans.  it slides back and forth like its stripped in the trans.  any help would be appreciated!!
      I think the biggest issue right now is the electrical.
  • Similar Tagged Content

    • By quadcrazy
      UTV enthusiasts now have the option to ride in style and comfort in all weather conditions with the enclosure kit.
    • By Mike8623
      Im looking for a atv fertilizer spreader that will spread bagged manure like Walmart sales. Does anyone have any recommendations or what have some of you used that will work with the bagged manure/fertilizer.
    • By chevyboy
      AL righty I did some trading around this weekend and ended up picking up a few 4 wheelers for cheap. I ended up with this one for $500 in it total and well the guy told me it dropped a valve. I haven't really messed with it at all. But this weekend I am going to try and start working on it some to get it running before winter time frame. So what I am asking is a couple of questions.
      1. First off where do I start I tried pulling the pull cord and could not get it to move at all.
      2. I need to get a service manual for this 4 wheeler where can I get it downloaded for free?
      3. what do I need to look for and how do I go about this really. I do have experience with 4 wheelers but this one is a little different to me than others because its a V2 and I have no clue where to start internal on the engines. Most of my experience is on the outside portion of troubleshooting on theses wheelers.
      Please no smart butt answers as i am new to here but just wanted opinions on where to start. Please and thanks wink:
    • By Tivy
      My boot on the drive shaft came off this weekend. When I tried to put it back on it appeared to be about 2" too large. Any explanations????
      Also when the boot cam off, there was oil in the boot. Is this normal???
      Thanks for your help.
    • By toonces
      Anybody know the axle nut size on a '11 Grizz 700?
      Also, could use a link to maybe a youtube video or a how to thread explaining how to change out the lower front boot.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...