Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Guest Fox300exchic

Handlebars

Recommended Posts

thats very true...like i said i run the steel bars ...they cost 20 bucks and i probably went through 3 of em last season...i just dont see the resoning in spending a 100 bucks for a set of bars that i will potentially bend anyways......as for the steering stem i really need to get a good one i think it would make all the difference...

Share this post


Link to post
Share on other sites


Are you from ATVFAN also? That paint job looks familiar!

yep you got it...i use the same username and all from atvfan.....i usually surf all kinds atv forums....some call it an obsession...lol i tell my g/f that atv's are my drug of chioce lol:cool:

Share this post


Link to post
Share on other sites
yep you got it...i use the same username and all from atvfan.....i usually surf all kinds atv forums....some call it an obsession...lol i tell my g/f that atv's are my drug of chioce lol:cool:

ha yeah i think me and stoopidbot have the same "drug of choice" :biglaugh:

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Bleuu
      Hello so I’m new to the atv seen, and was wonder why my stock light didn’t turn on , and it figures that the black and white wire and the black wire were ripped apart everything else is connected fine, what could to reconnect them
    • By JacobSlabach
      recently picked up some project bikes off CL for cheap.  got a honda fourtrax (the ancient 4x4 kind with the straight axle in the front as well as the rear and a back-up kick-start)  plastics are crap, but my goal is to get running like a champ and patch the plastics up and sell to one of my many friends that want a reliable 4x4 for dirt cheap and doesnt care what it looks like.
      so the former owner says it needs carb rebuilt, but its sat for 3+ years since so who knows.  things I see:  carb is missing (he gave me a box of parts along with the bike), engine turns over and feels good with kick-start, brakes need work, battery missing (That always puts me off, cause then I know most likely someone's been tampering with the electrical.
    • By ray desocio
      I posted earlier looking for a wiring diagram, but maybe someone can help me with the problem if they’ve had it before. 
       
      The quad Will start and idle ok, when I open the throttle it will rev all the way up until WOT and then it dies back down to idle, and if I keep the throttle wide open it will rev back up. It will do this over and over and over. 
       
      I replaced the carb, (twice), Rectifier, battery, and spark plug.  The Stator ohmed out to the proper specs from dinli.  The other issue i can see is I’m not getting 12v on the choke circuit. The lights don’t work either. 
       
      possible bad key switch? Maybe the new rectifier is bad? All the contacts on the key switch also ohm out properly    
      comprsssion is up to 125 psi and spark is there. 
       
      Reed valves look great.....
       
      im at a loss. Any trouble shooting advice would be appreciated. 
    • By Steve Howard
      Ran find shut down the quad next day would start and idle when you try to accelerate it would start popping through the carb got a rebuild kit soaked it in chem clean after break down for 12 hours on slow vibrate reassembled and adjusted per manual still the same thing any help would be really appreciated thanks and happy ridding  
  • Similar Tagged Content

    • By dirtdevil96
      I'm needing some new handlebars since I rolled my 2007 DVX/LTZ400 last December.I was hoping I could get some good ideas/info from others who's bought aftermarket bars.I'm 6 feet tall and the factory bars have always felt too low.From what I've read the factory bars are the CR Hi bend;is that true?What real benefits do the oversized 1 1/8" bars give?Which has a better vibration dampening effect;steel or aluminum?Do the antivibe steering stems really do much compared to stock?Would I be better off getting a steering damper and leaving the stock stem alone?I do all types of riding;everything from woods/trail to sand dune&mud running.I've been using some padded palm gloves to reduce the vibe it has already.Thanks in advance
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...