Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

jewellzy

1992 Kawasaki 300 bayou 4x4

Recommended Posts

--------------------------------------------------------------------------------

so i bought this atv,needs a muffler,picked up a cobra muffler cheap ,do i need to rejet the carb,also i see that there is a CHAMBER-PREMUFFLER can i eliminate it

Share this post


Link to post
Share on other sites


Depends on the backprsssure of the cobra muffler. You will need to check with them. Do they have a site?

Congrats on the atv!

* Added manufacturer to thread title.

Share this post


Link to post
Share on other sites

thank u for info ,whent to there site could not find any info ,so i cut the pre muffler off and welded the hole ,repacked the cobra muffler with just pink insulation ,started it ran fine but a little loud,went and got some muffler mat packing ,will be packing the muffler with ss wool and then the muffler packing,hopeing that will not be as load

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By John Dunn III
      Just bought a LT 230 anything I should watch for. It runs and drive good. Just don't want no surprises 
    • By bcsman
      So need some recommended maintenance I should do with my 1998 Foreman 450ES.  I didn't get much info as to what had been done so what's the things I should perform to start me from square one?  I'm not a mechanical genius but can do the basics.  I did adjust the toe today so I'm not a nooby.
    • By DKW
      Just got the above mentioned quadrunner. First one ever. Always been a small engine tinkerer but figured I'd need a little help on this one. 

    • By angellonewolf
      Ok got a quad if a mate that's helped me out a few times said I look at it for him


      Been sat for 6 years in a barn checked spark and also changed the spark plug after a sonic clean of the carb started and started easy but when you use the throttle it bogs and near dies

      Now this unit has 2 tanks one for oil and one for fuel for the moment I'm bypassing the 2 tanks and using only a fuel mix direct in to the carb could this be causing the problem ?

      I've done a second clean and refitted and still the same even as the air screw was near fully in it was said from watching a few vids that is was starving of fuel so I've increased the pin on the throttle up a notch but still no difference

      There is not much adjustments on the carb so assume there's not much to go wrong but I was going to buy another carb but I can't find the right one here a pic of the actual carb
    • By Clive Edwards
      Any member own an Aeon Cobra 350 cc need some advice please.
  • Similar Tagged Content

    • By pizzaman_288
      How hard is it to change the outer seals on the rear differential mine are leaking fluid and I have no idea on how to change them out any help would be great thanks
    • By M0BJT
      Hi Everyone
      This is my first post and I was wondering if there is anyone who can help me solve a problem I have with my Yamaha Kodiak 400 4x4 Fitted with a Mikuni Carburetor . The year of the quad is around 1998, the reason I am not sure of the date is, there wasn't any paperwork and no details on the frame either.
      The quad had a bad leak from the carb overflow which indicated that the float needle valve was blocked or passing so I replaced this and put everything back together. The quad ran really well until I took it onto some rough ground to have a ride around, a few hours later the engine started to run really rough as if the engine was flooding. I have removed the carb again and cleaned the needle valve out and the whole of the carb just in case there where any dirt behind it. Engine now runs fine again but fuel has started to run out the carb overflow again.
      I have tried everything to try and stop the fuel leaking out the overflow but its still happening. My last thoughts where to adjust the float level and its still happening.
      Has anyone got any thoughts on the problem or could suggest whats causing the fuel leaking out the overflow.
      Thanks for reading
      Kevin
    • By Billie
      :confused:need a repair manual or help in what to look for thank you Bill
      for you muddober to make clear to you the neutral light and the gear light
      do not light up win shifting fuses are good Iuse my CAt for hunting im dissable the atv is my leag s thank you
    • By Beb1041
      Looking for a download of a manual
    • By mmgood
      Just bought a 1987 bayou 185 frame and body great shape but have to rebuild motor does any one here have a manual for a 1987 kawasaki bayou 185 ? if you you do please let me know.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...