Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

pred_rider2007

I need help making my predator 500 faster

Recommended Posts

hi i have a 2007 polaris predator 500. it currently has.

-trinity stage 4 exhaust

-170 main jet

-15 tooth front sprocked (for more topend)

-shaved front fenders.

i just do NOT get it. i clocked it and it redlines at only 78mph. i want to do over 80 but still have good acceleration and be within a budget. can anybody have any suggestions of what else i should do?

Share this post


Link to post
Share on other sites


78mph isn't bad considering you don't have alot done to it, and most other sport quads don't go any faster than that without a good bit of money dumped into them. 80mph without just gearing it up will take a few bucks. A good bigbore kit may give you the extra grunt you need to properly pull the tall gearing you are already running, that will probably get you over 80mph.

Share this post


Link to post
Share on other sites

That would probably do it too, depending on how much over-rev you get, you may even be able to get your low end back by dropping your front sprocket down to stock size and still be able to stay over 80 on the top end.

Share this post


Link to post
Share on other sites

Most CDI boxes increase the rev about 800 to 1000 RPM's. An increase of 1000 RPM's on the Rhino without a more aggressive cam put the top speed from 42 to 51mph. JUST CHANGING THE CDI.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Tyler Reed
      Came here for help, If it’s in the wrong place I’ll move. I’ve got a 2000 model Polaris Magnum 500 that runs strong as can be for about 25 mins until warm, then sputters and loses power. Took it to a shop and they say it’s low compression and they will have to swap the entire engine. Seems a bit much and costs more than the entire bike. Was wondering if anyone has seen this and what the fix was. When I hear compression I think of gaskets, not an entire engine. Seems like if it was that bad it wouldn’t have power cold. I’m at a loss. Any help is appreciated greatly. 
    • By Dan Ellsweig
      Greetings
      I have a 98 Polaris Magnum 425. Runs GREAT for 10 minutes then starts to load up (sounds rich) and looses power. Final;ly just stalls out on idle. If it sits 20 minutes will run again.

      replaced fuel, added fuel treatment (seafoam), Replaced plug (carbon fouled), plug wires, air and fuel filter, checked all fuel and vac hoses, REPLACED carb with new. Still no good. Just ordered a coil, not sure if that will help
      Note: both the new and old carb only had the idel adjuster screw - cant find the jet adjustments or air/fuel mix screws so I cannot say how they are set.

      Looking for ideas short of spending big $$ on Polaris service

      HELP?????

      Thanks

      Dan
    • By Jack.hart
      Need help with a 2007 polaris phoenix 200 no spark new cdi,new ignition coil,checked resistance on pulse coil and stator,not getting power to start button now guessing the solenoide went in all the testing not sure.also have three ground wires to battery is this normal or..?
    • By bren7176
      Doeas any have the actual electrical diagram for the distirbution block  for this atv > I had a few wire not worky worky so needed to replace ends plus dam thiing is dirty so needs to clean all the contacts ..
      Want to make shure I get eveything back in right place .... I have the repair manual but as we know it no help really .....
       
      Brendan
  • Similar Tagged Content

    • By Alois Specht
      Hi there , have a KAZUMA 500 JAGUAR the rear diff is permanently locked , how can I get it out of lock just about tried everything I think, ?? .  Thank you your help is appreciated.
       
    • By mrfartsalot
      i have a 2001 suzuki quadmaster 500 4x4 that the primary cvt clutch is rusted on any ideas on how to get it off i want to try to reuse it if possible.
    • By Paul Maple
      I have a 1999 Sportsman  500, it was running fine, than started to lose power in the winter, I adjusted the idle screw and away I went, than a few weeks ago it died, I have found that i am flooding the engine, compression was at 70PSI and due to the compression release mech. i assume i am good as it compared to the same PSI on a 2000 sportsman 500 i have. i cannot start the atv unless i go full throttle and it starts an runs for about 30 sec than dies, again it is flooded. i ordered a new carb off ebay as i could get one for around $40. put that in same issue, i have checked the timing, (good), valves out of adjustment i adjusted to .006 still same issue, i have found the exhaust lobe and rocker arm to have some wear, i have ordered new ones, but am looking for any other input in this area as well. would the exhaust cam and rocker arm cause the engine to flood? i have used a bore scope and the piston liner has good cross hatching still? any input would be great.
    • By colin james
      View File 1996-2000 Polaris Sportsman 335/500 Service Manual
      This is the factory service manual for the polaris sportsman 335 & 500.
      You can download the section you need  or download all of the chapters for the complete manual 
      Submitter colin james Submitted 10/19/2018 Category Polaris ATV  
    • By colin james
      This is the factory service manual for the polaris sportsman 335 & 500.
      You can download the section you need  or download all of the chapters for the complete manual 
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...