Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

the_ry_guy

2007 Yamaha YFZ450 wont start...lame

Recommended Posts

So my 2007 Yamaha YFZ450 wont start...I narrowed it down to either the starter relay or the start button, battery is at full charge, and pushing the electric start button wont do anything, so i crossed the start relay with a screwdriver and she fired right up, shut it off, then tried the push button again, and it started, stopped it, tried the push button again, nothing, not even a click, now basically if you hit the start button 50 times it will crank finally but never the first time you hit it, so i'm thinking its either the starter relay going bad, or a faulty push button, any of you guys know a good way to test to isolate it down to just one without throwing money at it?

Share this post


Link to post
Share on other sites


I dont know how to narrow it down but if you go on yfzcentral.com I know there are a couple of threads about the same problem and maybe you can find an answer there if you dont get one here. Sorry I couldnt help more but I am new to owning a yfz myself.

Share this post


Link to post
Share on other sites

well thanks for the tip anyways, ya i'm always bragging about how reliable it is, but i guess everythings got to break sooner or later right lol

Share this post


Link to post
Share on other sites

Hey I also have a friend that can get you a PDF Service Manual for free and it has electrical trouble shooting in it if you are good at that. It will give you the resistance, voltage and so on for each of the two parts you have narrowed it down to. So with the manual you should be able to determine which one it is. So let me know if you want the service manual and I will ask him to get it for you. And in the mean time here is a page with that has 04 and 06 manuals which also might have the same thing.

YFZ450 Garage

Share this post


Link to post
Share on other sites

I moved this thread to Yamaha Forum. Added Year and ATV Manufacturer. :wink:

Share this post


Link to post
Share on other sites


Hey I also have a friend that can get you a PDF Service Manual for free and it has electrical trouble shooting in it if you are good at that. It will give you the resistance, voltage and so on for each of the two parts you have narrowed it down to. So with the manual you should be able to determine which one it is. So let me know if you want the service manual and I will ask him to get it for you. And in the mean time here is a page with that has 04 and 06 manuals which also might have the same thing.

YFZ450 Garage

That would be amazing Ballistik, if you can email it to me @ [email protected] I'd be in debt to ya man.

Share this post


Link to post
Share on other sites

If you figure out how the relay is wired, you can test the relay by tripping the signal tab. It recieves either a 12v+ charge when the start button is pushed, or it is connected to ground when the button is pushed. You can test the switch by checking for continuity when the button is pushed, if you can find a spot in the wires running out of the switch where there is connectors or something, you can test them at that point. Another thing you might want to do is just inspect the wires for damage or loose connections.

Share this post


Link to post
Share on other sites

Aw Josh you beat me to it! that's how you test a starter switch/relay. Most, but not all, Yammers are ground to start. Rem I said 'not all,' at any rate the book you just got should have a test procedure in it. And yes, the valves are CRITICAL on those and can cause many problems, including hard starting. Unfortunately, they have to be done at a shop since they use shims like a race bike or a Ferrari. Now had you bought a Raptor you could adjust the valves yoursel;f...

Edited by Raptor8

Share this post


Link to post
Share on other sites


Aw Josh you beat me to it! that's how you test a starter switch/relay. Most, but not all, Yammers are ground to start. Rem I said 'not all,' at any rate the book you just got should have a test procedure in it. And yes, the valves are CRITICAL on those and can cause many problems, including hard starting. Unfortunately, they have to be done at a shop since they use shims like a race bike or a Ferrari. Now had you bought a Raptor you could adjust the valves yoursel;f...

I get things right from time to time:biggrin: Why do you say that the valve adjustment has to be done at a shop? I realize that not everyone should be tearing into their engine, but I do my own valves, just measure the clearance, if they are off figure out how much they are off by and swap shims according to the difference. Make sure your timing chain is set and torque the cam caps properly. I know it isn't the easiest thing in the world, but I think that most people who are competent with a wrench could do fine. Besides, I don't think valves are keeping the start relay from recieving the signal from the start button.

Share this post


Link to post
Share on other sites

most ppl avoid valve adjusts on those cuz they require shims, and according to Yamaha, special tools too. You have far more skills than the average user so you can go buy a shim you don't have- most folks folks just let 'em go until they have burned seats.

A page from the Honda book: if it's ticking then it's not too tight- if it's quiet, then it needs to be examined.

That little shim box and tool kit represents a significant investment to the dealer cuz he has to buy the training as well.

In my travels I have found more and more HIGH PRO quads out there without the proper maintenance- and just one leaky valve can drive you into the Tylenol jar in the first aid kit.

Funny, my 1981 street bike is bucket and shim, but my Raptor 660 has adjustable tappets....

I have 2 Honda accords and they both make little ticking sounds that way I know theyre not doing damge by being too tight and not closing- plus it makes em great 'sleepers' harharhar

MOST OHC quads that are quiet in the head are too tight.:laugh:

Share this post


Link to post
Share on other sites

the starter Relay is a completely different problem which you covered very well!

I try to use a shotgun approach to a problem since I'm not there to see or hear it. Chances are good the thing needs a valve adjust anyway. Lack of this will eventually cause hard starting. I just wish ppl would read their OWNERS manual and buy a $ 15 shop manual!!!

Share this post


Link to post
Share on other sites

Josh, we must go riding together one of these days- we are not that far apart for the west coast- where we measure distance in hours.... :)

Share this post


Link to post
Share on other sites

Indeed, it only takes me about 5 or 6 hours or to get down to Florence or Winchester Bay. I really want to hit Coos Bay this year. I am hoping to take a trip down to Oregon in the late spring or early summer, maybe sooner if the opportunity presents itself. I will be sure to let you know if I head down that way.

I know all to well the neglect that many of these four stroke sport quads endure. I have been telling many of my friends over and over that they need to check those valves. I even offer to help, but they insist that if it starts and runs then it is ok. I guess some people need to learn the hard way.

Share this post


Link to post
Share on other sites


Im going to sand lake, oregon the weekend of the 29th, id like to go to winchester bay more often but its about 6 hours for me too, and sand lake is only 3. going to tahuya for memorial day too, hope i can get a camper spot lol. Im getting a new start button for the quad here soon, hopefully before the trip, and you guys are right, i do need to get it in and get the valves checked, it hasnt been since ive owned it. about a year now, and who knows before that...

Share this post


Link to post
Share on other sites

It is very important to keep on top of those valves with these new hi-po fourstrokes. Those valves get too tight and it could cost alot of money. I check mine every month, sometimes twice a month if I ride alot.

Share this post


Link to post
Share on other sites

do u see a lot of treats about valve adjusting ?problems with that i didn't.if u have the same start problem issue try to jump the switch if problem persist then its relay my 700 raptor with low battery hard to start too .i didn't ride much.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Chase Cook
      I have a Yamaha 350 in at once to try to fire up but won't. It's getting gas fire air and it has a lot of compression but still struggles to start check the timing it's top dead center valves are good valves are adjusted everything's working but won't fire I put my hand over the carb suck in gas and it tries to but it makes a lot of black smoke. Also when I put my hand over do you carb and tried to start it there's black black nasty stuff in the gas. So I don't know if it's trying to burn too much or what it is the gas tank clean and it anything to do with the gas it's with it firing. Took the spark plug out and it's pure black. What is dried up black not nasty corroded wet looking. Need help to solve the issue
    • By Colby Calk
      I recently got a 98 warrior 350 that 'needed the carb adjusted' but the reality is it has no spark. I have a new spark plug, plug wire, ignition coil, battery, and cdi box. I checked continuity and took apart and inspected the starter/kill/light switch on the handle bar, and it all looks brand new and checked out. The key switch seems to be working properly, as when off, nothing works, but when switched on, lights and electric starter button work. It turns over fine, and as I just stated, all the lights work. I took all the plastics off and traced all the wires, and only one had a small cut in it, but it was only through the rubber sheathing, not the wire itself (the blue one coming from the stator). I cleaned some grounds, made sure both relays work, and still nothing. I pulled the stator cover and looked at the stator itself, and it looks great. No broken wires or connectors or anything. Still, no spark. I'm at a loss. Where do I go next? Any help is appreciated.
    • By mrfartsalot
      i have a 1986 yamaha moto 4 200 and was wondering if i could put a 350 or 300 jug and piston on it to bump up the cc?
    • By ATVNetwork
      Introducing the 2020 Yamaha XT-R editions of ATV and Side-by-Side vehicles featuring exclusive XT-R features like a factory-installed Warn Winch, advanced suspension, special-edition paint and color-matched wheels with extreme terrain tires, all Assembled in the USA for unmatched Proven Off-Road capability, comfort, and confidence. 
      YXZ1000R SS XT-R: https://yamaha.us/yYXZXTR 
      Wolverine X2 XT-R: https://yamaha.us/yX2RSXTR
      Wolverine X4 XT-R: https://yamaha.us/yX4XTR
      Grizzly EPS XT-R: https://yamaha.us/yGrizXTR
       
       

      View full post
    • By Monika Novakov
      1988 Kawasaki 220 Bayou trying to remove generator/ starter 1way clutch cover to be able to replace 1way clutch. All bolts are removed case cover is dripping what oil that remains...but I can't get the cover to come off..what am I missing? Thx in advance.
  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • Guest Fox300exchic
      By Guest Fox300exchic
      If we had a dollar for every time the question “Which is really faster, the 700 or the 450?” shows up in our inbox, mailbox, or voicemail, we’d be putting this magazine together from a bungalow on a barely inhabited tropical isle named Quadhama.
      http://www.quadmagazine.com/quad/features/article/0,24942,1603755,00.html
    • By WCRTeam
      YFZ450 KFX450 Videoclip sand pit.
      [ame=http://www.youtube.com/watch?v=o7-G1XtovJw&list=HL1348537580&feature=mh_lolz]KFX 450 YFZ 450 WCR - YouTube[/ame]
    • By surfdog420
      i have a 06 yfz450 that ran fine a few days ago but now it will only turn over and wont start dose any body have idea on what it could be,ive heared it could be the valves(hoping its not) any help will do
    • By keithmoore6766
      07 yfz450 part out through rod busted block has aftermarket rims pipe i got it in a trade and i dont mess with atvs much i just know its going to cost more to fix then i wana put in it put if your intersted just make ofer and ill let ya know email me at
      [email protected]
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...