Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

redheadstepkid79

1999 Honda 400ex. no balls!?

Recommended Posts

I've cleaned the carb,air filter and this thing still is screwed up. It starts,runs and idles fine, when you give it gas it just dosent want to go(fast) I haven't changed the plug yet, never seen this happen due to a bad plug. I guess now I'm leaning twords electrical? Any ideas in the right direction are greatly appreciated.

Share this post


Link to post
Share on other sites


Pipe, jets,exhaust. We were out riding was running fine then on the next ride it does this. Not many hours on the motor. Can't figure out what the hell is going on! Could the valves case a problem like this? All the sudden? It was a matter of about 20 mins!

Share this post


Link to post
Share on other sites

* Moved thread to Honda forum and added year and make to thread title.

Share this post


Link to post
Share on other sites


check your intake boot for dry rot cracks and pin holes will cause this and check choke pistion check and make sure the choke is not closing when reve the motor.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By oliverstevenrjr
      I have a 425 Magnum that idles great but seems to flood out when I rev it up, sputters, backfires a little somtimes. No water in gas, good fuel filter, carb seems to be fine, good working diaphram. Plug change makes no difference whatsoever.
    • By Flipper Tiffany Roper Jones
      All I have been through everything. Bought brand new.
      Throttle safety switch 
      Cam and rockers
      ECM
      Carborator
      Stator
      Fuel safety switch 
      Battery
      Everything every forum has spoken of I've bought sealed airbox completely tight unplugged black wire on trans. I have literally done everything in the book.Checked oil today full of gas anyone no anything what might b wrong. Next I'm taking head off and making sure valves seat any ideas.
    • By Tiffany Rowland
      I recently purchased an 07 Honda sportrax and when I was checking the spark plug I saw the boot was ripped nearly in half. When I removed the plug it was blackened and covered in oil. How can I thoroughly clean the plug hole and remove any debris that is in there? Is there a small tube like vacuum or something of the sort made for stuff like this? The machine my dentist has would be perfect, maybe they do rentals! 😁

    • By Tiffany Rowland
      I recently purchased an 07 Honda sportrax and when I was checking the spark plug I saw the boot was ripped nearly in half. When I removed the plug it was blackened and covered in oil. How can I thoroughly clean the plug hole and remove any debris that is in there? Is there a small tube like vacuum or something of the sort made for stuff like this? The machine my dentist has would be perfect, maybe they do rentals! 😁
    • By Arizona
      Went shopping on Saturday, picked up another Kawasaki Bayou 220 and a Yamaha Timber Wolf 250
      I really should sell some of these but they are a lot of fun to find, fix and ride
      Of course neither of them run but that's part of the fun!  Az



  • Similar Tagged Content

    • By Bob Hill
      I need a motor but i really dont hsve lots of cash and im on the kenai peninsula. Up here in Alaska i really need help
    • By Wali
      I was riding my 400ex one day and when i shut it off to put it in the garage i tried to start it put again to drive it into the garge and it wouldnt start.I put a compression tester on it and its like 30 psi with out throttle and 0 psi WITH THROTTLE.
      when i put my finger over the hole it fell likes its pulling my finger in more then its pushing it out 
       
      Has good spark.When i took it into the shop the said it had 1oz of oil in it and a tiny pit of metal shaving(TINY BIT LIKE 30 flakes)
      When i try to pull start (push start/roll start) it made a not normal sound  and wouldnt stay running.
      If my bottom end is blow why would it still turn over fine,
      Are my valves siezed or not working properly 
      or is my timing off causeing valves to not open in correct order with fire 
      PLEASE HELP all help is appreciated 
    • By Coral Breding
      I loosened the allen bolts on the carrier and when I went to put my driver in the alot to pull back and tighten the chain, I noticed the holes were facing the front of the bike. I tried to slide a driver in and tighten the chain but the thing would not budge. I nearly ripped the tip off the driver in the slot. Any suggestions? 


    • By afa913
      Am i better off to just replace the bearings or buy the whole carrier?
    • By afa913
      Anyone know a place i can find a used stock pipe for a 400ex?  I would love to find a take off
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...