Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

irishdude

does back fireing damage my quad?

Recommended Posts

my chinese quad back fires when deceleration and was wondering if it is a big issue because i have a feeling that its going to be a big job with the carb to get it running right

any help is much appreciated

thanks :)

Share this post


Link to post
Share on other sites


It's not great, it's detonation when there shouldn't be and that stresses the motor. Try cleaning the carb and checking the air filter.

Share this post


Link to post
Share on other sites

right lads i will strip down the carb its just that its in an awkward spot and i just put on some gasket sealant.. oh ya will i need to remove the gasket sealant when re assembling it or will the dried stuff be ok?

Share this post


Link to post
Share on other sites

The carb should have o-ring gaskets, they are fine to re use as long as they are not brittle or damaged. The backfire itself will not likely damage anything, but the condition that is causing it could. I would start my checking the carb, air filter and valve adjustment.

Share this post


Link to post
Share on other sites


backfiring can cause overstreatch of the head bolts and if it is on the down speed then it is usually overfueling and detonation.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Meg Sam
      Hi I have bought a Bashan bs200s-3 and I am wondering where I can buy parts for this as I need a full new wireing loom also does this model have reverse gear?
    • By Buell
      Hey guys, figure you guys would have some helpful direction or answers.
      So, 05 Sportsman 700 carb, new carb, fuel pump, new plugs, new air filter, new everything I can think of that is usually the running issues. Starts up fine, seems to run fine, but if under load, two people, or even one person, up a hill, or pulling a drag chain for the driveway, it starts to cut out and sputters and loses all power, until I back off on the throttle and just barely try to let itself catch itself and then I can take off again.
      I am going crazy trying to figure this thing out. Other than that, the quad runs great. Parents bought bran new, just used around the property, 5000 miles on it. Any ideas???
    • By ezduzit
      So my quad will start and run pull start, i installed new battery, solenoid, ignition. the problem is
      1 the starter will try but not start. the quad. 
      2 when running i cannot shut it down with either the switch or the ignition i shut it down by allowing the fuel to run out.
      3 no lights come on headlights or brake lights
      when i turn the ignition on my neutral light works as well as the reverse indicator.
      any suggestions greatly appreciated.
    • By Shane Pillar
      Talk about what kind of atv you have and what you do with it.
  • Similar Tagged Content

    • Guest Fox300exchic
      By Guest Fox300exchic
      The Hop-Up: You may be saying to yourself, “that’s a chick bike,” and you’re right. But honestly, it’s so much more than that. It’s one badass bike. http://www.quadmagazine.com/quad/features/article/0,24942,1587044,00.html
    • By katasha2
      I took apart the carburator to clean out and I can't remember exactly where the springs that are inside the float are supposed to go I've tried to look up schematics but I think I am missing a spring maybe need helpt:confused::confused:
    • By skgw1
      Feul pump went out. Replaced. At times quad cuts out like its not getting gas. Saw article on new pump needs to be calibrated. Told how to go into a service mode. Does not tell how to calibrate after going into mode. Can anyone shed light on this procedure.
    • By Bwdeaton
      I recently picked up a king quad 700 that doesn't run in the hopes of getting it running by spring. It had been previously taken apart some and a few pieces are missing in the engine, but the frame is complete and in good condition. The motor will need a piston, rings, cylinder, cams, and a few misc parts that are missing. Also the cases will need to be split to remove the pieces of piston that are in the crankcase. The piston blew up at high rpm and did a number on the cylinder so I'm trying to find out if it would be worth rebuilding this motor it buying another engine to swap in. There may be more damage to this engine that I can see so I was wondering how bad the insides of it could be considering it destroyed the piston. I have found a motor for 1200 plus 200 shipping, the only problem is I don't have that much now and I would have to save up a while before being able to afford it. Any suggestions appreciated.
    • By superdude811
      Can you put tracks on manual atvs? would it be effective? is 280cc enough to even move them? thoughts/suggestions?
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...