Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
I picked up my first ever ATV on friday. It's an 89 Big Bear. It has some cosmetic issues, but seems pretty decent mechanically. I did have trouble getting the idle tuned to the book spec of 1,300 - 1,500 RPM. I took the carb apart and cleaned it out. Somebody must have lost the spring for the pilot screw, as it's no longer in the carb. Also, I have a dual cable carb, I noticed all the IPL's show the single cable carb, but I see others on youtube had dual cable carbs. When I would adjust my idle speed screw, nothing would happen. I bottomed it out and it didn't seem to make much if any difference. When i pulled the carb apart I saw the screw doesn't even touch the linkage, it's too short. Do the two different versions have different length carb screws? I'm wondering if somebody lost the ordinal, replaced it with the IPL number for a single cable carb which is shorter, and gave up on getting the ATV to idle. If you hold the throttle just a bit to get it to the RPM range listed above, it "idles" great. Any ideas? Or any links to the dual cable IPL?
Have you guys have good luck with the aftermarket intake boots? Or is this a buy once, cry once deal? I'm guessing the OEM units last longer, but there is a huge price difference. If you have had good luck with aftermarket, where did you get it? My current boot doesn't seem to have any air leaks, but it's encased in JB weld...
I'm getting a 9th digit check sum error on the ATV when I put the VIN in. Has anybody seen this before on a Yamaha? The VIN number looks original as well as the paint around it.
Looking for Yamaha ATV VIN (Vehicle Identification Number) Number Decoders? Once you find your ATV VIN number off the tag on your Yamaha ATV, you can go to all kinds of websites that have VIN Decoders available. The best ones are backed by the Yamaha ATV manufacturer, however there are plenty of aftermarket Yamaha ATV VIN Decoder websites on the web. This topic will stay pinned and if you find any to add, please do it with a reply.
The following Yamaha ATV VIN Decoder websites are available where you can just enter your VIN number and it will shows you some of your ATV model details:
NICB Theft Check https://www.nicb.org/theft_and_fraud_awareness/vincheck
Similar Tagged Content
By Connor Tuftin
I have a 1988 300 Honda FourTrax, All wheel drive.
My brother and I were fixing up this quad. We put a brand new battery and fuses in and it was running fine until we put the quad into reverse. As soon as it was put into reverse all of the electrical cut out and power wasn't making it to the head unit anymore and both of the brand new fuses popped. We figured there might have been a short from the starter or solenoids, but they are all working properly. At this point we don't know where to start looking for where the short could be. I'm just wondering if anybody has had the same issue or knows of similar issues that could cause these electrical shorts?
By Resurgence Small Engine Inc.
Not satisfied with the commercially available versions, Jonathan recently built an ATV spring compressor.
In this video, he demonstrates using it to remove & re-install the spring on an ATV coil-over shock absorber.
Mistake in video - the coil-over shock is not quite a McPherson strut.
If you are inspired to build your own spring compressor, feel welcome to use any ideas from this video.
Thanks for watching! Resurgence Small Engine Inc.
By Robert Ochoa
Don't worry about hauling the ATVs. We have the helmets, goggles, and gloves covered too. Our equipment is well maintained and gassed up ready to go!
We take the work out of your fun!
Book your next adventure now!
#fourwheeler #atvlife #atvriding #atv #4wheeling #fourwheeling #mudding #outdooradventure #atvs #mudlife #powersports #northcarolina #southcarolina #southcarolinalife #offroading #AwesomeATVRentals #yamaha
Gibbs Technologies Ltd, the world’s only High Speed Amphibian (HSA) technology specialist, today unveiled a prototype of the first commercially viable high-speed amphibian Quadbike/All Terrain Vehicle (ATV) - Quadski.
Quadski is the third demonstration of Gibbs’ HSA technology following the successes of the Aquada and the Humdinga. It is capable of travelling up to 50 mph (72 kph) on land and water and makes the transition at the flick of a switch.
Commenting on the launch of the Quadski prototype, Alan Gibbs, the founder of UK based Gibbs Technologies Ltd. said, “Quadski is both exciting and practical with a multitude of uses”.
“I know consumers will love the fun of driving a Quadski on land one minute and then head straight into the sea or river the next. But there is a very serious side to Quadski as well: emergency services and aid workers will be able to reach areas and people no two or four wheel drive vehicle could reach.”
Recently Browsing 0 members
No registered users viewing this page.