Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Introducing the 2020 Yamaha XT-R editions of ATV and Side-by-Side vehicles featuring exclusive XT-R features like a factory-installed Warn Winch, advanced suspension, special-edition paint and color-matched wheels with extreme terrain tires, all Assembled in the USA for unmatched Proven Off-Road capability, comfort, and confidence.
YXZ1000R SS XT-R: https://yamaha.us/yYXZXTR
Wolverine X2 XT-R: https://yamaha.us/yX2RSXTR
Wolverine X4 XT-R: https://yamaha.us/yX4XTR
Grizzly EPS XT-R: https://yamaha.us/yGrizXTR
View full post
Following on from the brief interlude in the "introducing myself" thread....
In a nutshell, I acquired a YFM250 Moto 4 (1991) for cheap recently with the previous owner citing "no spark, needs a new magneto coil and I don't have time to fix it"... anyway I am dubious that the magneto/generator is the issue and thinking more along the line of ignition coil as after a clean up of the magneto I was able to get a rather decent voltage reading off the magneto with pull start and resistence readings seem to check out that the magneto is all ok (all 3 x phases = 1.2 ohms and no run to ground)
None the less I ordered a new Ignition coil and Magneto/generator coil and am waiting for them to arrive.
In the mean time I cleaned up the current Magneto, popped in a new battery and sparkplug, checked out all the wiring harness, all seemed good except I came across the "neutral switch" wire was broken.
After wiring up a new neutral switch wire, the neutral light now comes on (small win) and the starter relay (attached to rectifier) now clicks. If I hit the starter switch on handle bar the starter motor spins and if I pull the cord starter I get a spark on pull....YAY!! I'll try and attach a video below if possible.
So onto the starter motor. Starter solenoid seems to work A-ok, even if it looks crappy and starter motor spins as it should when I hit the start switch....but here is my issue.
When the starter motor runs it turns Cog #1 and Cog #2 (see photo below)....but the chain in the back of the starter which I assume is the timing chain, does not move and there is no apparent movement of the piston in the cylinder.
If I turn it by hand (per photo) or with the pull starter however the chain moves and the engine turns. However cog #2 rotates but not fluidly with the "Crank" (part I turn by hand) for the lack of a better word to use if that makes sense?
Is there a grub screw or similar on Cog #2 that fixes it to the center shaft to make it all turn when the starter motor is run? Could there be a part missing? Previous owner had the starter apart so could be possible?
The outer/front part seems to be on a key-way so not sure how to remove this easily to check how Cog #2 is attached.
What am I missing here?
By Dan Tressler
I have a 2018 Sportsman 570 SP Hunters Edition. I bought the quad new in August of 2018 and put around 20 miles on it with no issues. In early January of this year the quad was acting as if it had a bad battery even though it had been plugged into a tender. I checked the battery and it tested well so I took it to the dealership for warranty service. They had it for almost a month. They determined the quad had a bad EPS unit and swapped it out. Then they told me that the wire for the EPS needed to be updated as they could not program the new unit with the old wire. After the wire came in dealership told me they were still having troubles programming. After another week and a half they told me that they had consulted several times with engineers from Polaris and found a workaround and that the quad was ready for pickup. I contacted Polaris to inquire about the warranty being extended as it was in the shop for a month. They extended the 6 month factory warranty for an additional 3 months. I picked the quad up and the dealership said that the 2018 SP editions were known to have issue a with the EPS units but believed that they had fixed mine. I had it back for around a month and took it out a couple times for short rides and everything seemed fine. I parked it again for a few days and when I went to start it same issues (acting like the battery is no good and won’t start, when I jump start no power steering). Took it back to dealership and waiting to hear what the diagnosis is this time as well as their plan to fix this permanently. Just wondering if anyone else has had issues similar to mine or can give me some advice. Thanks in advance!
my stolen side x side i ask that anyone with info to call me please it’s worth $17,500 it was stolen from my camp on Pleasant Grove Chapparell Rd… Waynesboro Ms. It’s a 2011 Polaris Ranger Browning Edition it’s has two LED light bars one on the roof and one on bumper it’s camo in color. I am offering $1000 reward for information that leads to recovery of goods and capture of suspects…
1-337-257-0391 any help would be greatly appreciated…
The post Stolen 2011 Polaris Ranger Browning Edition appeared first on Stolen 911.
View the full article
OUR 2012 POLARIS ATV, 4 SEATER ROBBY GORDON EDITION WAS STOLEN FROM OUR RESIDENCE DRIVEWAY IN ODESSA, FLORIDA ON NOVEMBER 9,2014. WITH LOW MILES AND EXCELLENT CONDITION, THIS ORANGE AND WHITE ATV COULD HAVE EASILY BE REPAINTED OR DECALED FOR A QUICK SALE ANYWHERE IN THE USA!
IF YOU ARE A DEALER OR CONSUMER LOOKING TO BUY ONE WHO IS READING THIS, PLEASE LOOK AT SERIAL NUMBER IMMEDIATELY. WE ARE OFFERING A $2000.00 CASH REWARD FOR ANY INFORMATION LEADING TO THE RECOVERY OF THIS ATV.
The post 2012 POLARIS ATV – ROBBY GORDON EDITION appeared first on Stolen 911.
View the full article
Similar Tagged Content
Recently Browsing 0 members
No registered users viewing this page.