Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
I am looking to see why my 2005 Grizzly 660 won't crank. I have set the valves but suspect a loose timing chain.
When working to remove the valve cover I found a "cap tensioner case" - parts #25 - #299 on Babbitts site.
The cover seems to bridge the valve cover and the cylinder head. What the hell is it and what surprises will I find if I remove it?
Uncharted territory for me.
ATV was stolen out of our 2016 Voltage 3305 Toy Hauler that was at Cutting Edge Collision for repairs. The rear locks were broken on the rear of the toy hauler and the ATV was Stolen. Cutting Edge Collision is in a gated and secured area
The post 2007 Suzuki LTZ 400 Stolen in Tucson Arizona appeared first on Stolen 911.
View the full article
I bought a "project" Grizzly 660, I think it has been a few people's project. The PO had it for a while and did not have time to work on it. He said the battery was good, but I don't know how he knew because the display was blank, no lights and won't crank or run.
I found a nest under the front cover, by the CVT inlet, a chewed thru wire and a few more without insulation. Rewired those from the connector (black 3 wire to the display) and replaced the fuse as suggested by a search from this site. That got the display working and power to other circuits.
I replaced the aftermarket start switch with a used OEM switch from eBay. Then it would crank a little, and started once for a few seconds.
I'm a small engine mechanic - mowers, snow blowers, etc. In my small engine work I have had a number of rider mowers that would crank about a half turn and then stop. The owners have suspected a bad battery and changed it with no improvement. Setting the valves to spec usually fixed this.
I set the valves on the Grizzly without solving the crank problem. I wonder if the timing chain could be off - slipped a tooth.
I don't know any way to check for this without pulling the head and looking at the timing marks on the cam gear.
Is there another way to check for proper timing?
By fede hanssen
I have just got a 1995 Bayou 220 from my brother. It is in decent condition ant it has not been used much, yet it has been sitting idle for a long time (4+ years).
The plan is to overhaul it and move it to a location where it will be used 4-6 times a year, so, beyond having the battery charged, the idea is to have it ready and in good condition. It will be stored in a steltered place while waiting to be used.
My questions would be: 1. What things should I carry out as basic overhaul tasks / 2. What are the typical aches, things to watch out for in this model/year.
I definitely plan on changing all the fluids, filters, battery, cleaning the carb, etc. but any specific recommendation from your experience will be of great help.
thanks in advance!
Recently Browsing 0 members
No registered users viewing this page.