Join Today, It's Simple and FREE!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Following on from the brief interlude in the "introducing myself" thread....
In a nutshell, I acquired a YFM250 Moto 4 (1991) for cheap recently with the previous owner citing "no spark, needs a new magneto coil and I don't have time to fix it"... anyway I am dubious that the magneto/generator is the issue and thinking more along the line of ignition coil as after a clean up of the magneto I was able to get a rather decent voltage reading off the magneto with pull start and resistence readings seem to check out that the magneto is all ok (all 3 x phases = 1.2 ohms and no run to ground)
None the less I ordered a new Ignition coil and Magneto/generator coil and am waiting for them to arrive.
In the mean time I cleaned up the current Magneto, popped in a new battery and sparkplug, checked out all the wiring harness, all seemed good except I came across the "neutral switch" wire was broken.
After wiring up a new neutral switch wire, the neutral light now comes on (small win) and the starter relay (attached to rectifier) now clicks. If I hit the starter switch on handle bar the starter motor spins and if I pull the cord starter I get a spark on pull....YAY!! I'll try and attach a video below if possible.
So onto the starter motor. Starter solenoid seems to work A-ok, even if it looks crappy and starter motor spins as it should when I hit the start switch....but here is my issue.
When the starter motor runs it turns Cog #1 and Cog #2 (see photo below)....but the chain in the back of the starter which I assume is the timing chain, does not move and there is no apparent movement of the piston in the cylinder.
If I turn it by hand (per photo) or with the pull starter however the chain moves and the engine turns. However cog #2 rotates but not fluidly with the "Crank" (part I turn by hand) for the lack of a better word to use if that makes sense?
Is there a grub screw or similar on Cog #2 that fixes it to the center shaft to make it all turn when the starter motor is run? Could there be a part missing? Previous owner had the starter apart so could be possible?
The outer/front part seems to be on a key-way so not sure how to remove this easily to check how Cog #2 is attached.
What am I missing here?
I am trying to help my son with a machine he recently bought. A Coleman Outfitters 400 4x4 UTV.(Ihsun 400) The problem is a big one and I'm trying to work through a step at a time. It's a 2014 that had a Kodiak 400 motor and CDI box put in it for some reason but don't know year. There was a fire and someone pulled out and messed up the old wiring harness. He got a new harness for the Utv but now we have to try to figure out how to wire everything together. Any help on wiring the Kodiak to it's own CDI and or into the Utv would be Greatly appreciated. If I get a Diagram for that motors wiring then I can go to work on the harness install for the machine. I do have pictures of some of the #s on the motor, CDI box and of the harness coming from the motor.
I know its asking for a lot to hope someone might be able and willing to help but it would be great if I could get some feed back. Now I have to see about uploading some manuals I have for older Linhai/Manco Atvs that I have.
Hello all. As a second major part to trying to help my son bring a 2014 Coleman Outfitters 400 UTV to life I am trying to find a schematic of the electrical system for the complete machine. Have to try to wire a Kodiak 400 engine and CDI box into a New machine wiring harness. We also have to install the Complete harness into the machine as the old one was stripped out. Have nothing against buying a service manual but really love it if/when I can find a Schematic in a PDF file so I can blow it help to better follow the wire runs.
Since we were kids dreaming of owning our first ATV, some of us were also dreaming up how to get that ATV up on two wheels! Doing a "wheelie" is what it's called and traditionally, it refers to the art of getting the front end of your ATV up in the air and riding on only your back wheels. We've done them with our bicycles and graduated to dirt bikes and quads at some point. Some riders have even got their ATVs up on the side, leaning to one side on two wheels, now that's a challenge in itself! Check out some of the wheelies our members have done and posted into our ATV Wheelies & On Two Wheels section in our Gallery!
Here's a photo shared by @blahhhh with front wheels in the air!
@sanddevil has her wheels in the air out in the sand, great shot!
We mentioned it earlier, how about this duo with their ATV on the side! This cool photo was shared by @Z400Pilot.
It gets even crazier with this photo posted by @ojest808!
And then one of our personal favorites posted by @NY_Vmax_Joe with legs to the side and wheel up on two at Pismo Beach!
It's hard not to love looking at wheelie photos, they just look like so much fun. Just remember, always wear a helmet and protective gear when attempting to show off!
Got some good ATV "Wheelie" photos? Post them in our gallery here.
Check out our forum topic on "How do I pop a wheelie?" by @NinasATV
View full post
atvs Vintage Motorsports’ latest amazing ride
Nothing turns heads these days more than a good-looking, running and of course great sounding Honda 250R. View the full article
Recently Browsing 0 members
No registered users viewing this page.