Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

Bud03420

1986 Kawasaki Bayou 300 - Still Smoking After Rebuild

Recommended Posts

just got my motor back together and its still smoking not as bad as before but smoking pretty good still, the motor had a bad valve and one of the head bolt seals where bad and was dumping oil into cylinder so there's a lot of oil in the tailpipe cause the guy I bought it from ran it around his farm and didn't care about the smoke just bought a new plug when it fouled, could the smoke im seeing just be it burning off what's in the pipe? Bike doesn't smoke to bad when idling just when giving it gas?

bike has new rings, new valves, new top end seals, new aftermarket trx carb bout an hour break in idling in my yard, the head shop said one valve seat was in spec but barely could that be the problem?

any suggestions are greatly appreciated

Share this post


Link to post
Share on other sites


its probably the tail pipe like you say. if you can take it off you would probably see a difference. just keep an eye on your oil level and if it's good, you know it's just what's in the pipe burning off.

Share this post


Link to post
Share on other sites
What colour smoke?

White

Let it run for a while today seems to be getting better I'm thinking just take it to the trail and see what happens

Edited by Bud03420

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Michael Rogers
      Well this is my first time tearing down an ATV. Have done a little work on 2 stroke's in the past, but not much. I'm needing some help. I've got a Bayou that has lost compression. I tested it, and it was like at 40psi. I had already set the timing on it, and it does have spark fuel, etc...
      My question is about the cylinder. To me it looks pretty toasted, but need some help in determining. It is a 2000 Kawasaki Bayou 220. I bought it not running, just to see if I can get it running so it has not ran since I bought it. This question is about the cylinder, and part 2 I have will be about the CAM.
      Any advice / help is greatly appreciated.
      Inside sleeve a line(left line) runs the length that I can feel with my fingernail. The line on the right I can't feel.

       
      Some rust it looks like on these two pictures.
       

      Thanks!
    • By Rich1028
      Good/Better/Best +1 A-Arms honda 400 X 2008-2014 
       
      What are some of the good, better,and the best 1+ a arms out there?
      where does Houser Racing Fall?
      https://www.houser-racing.com/Honda-400EX-1-Standard-Travel-A-arms-p/030107-01.htm
      JD Performance
      http://www.jdperformance.net/488_Web_Design/a_arms.html
       
      and something found on ebay
      https://www.ebay.com/itm/TRX-400EX-400EX-1-A-ARMS-SALE-SILVER-VEIN-LIFETIME-WARRANTY-GNCC/372763670824?hash=item56ca723928:g:qwIAAOSwJkZddV2x
    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By bren7176
      So honed out the cylinder and got most of it nice nice but left with this .. Might just have to have the things bored out now ..... some before and after..pics.
      1995 Polaris Sportsman 400 4x4 
       
       

       
       
      have to have the things bored out now ..... some before and after..pics..









  • Similar Tagged Content

    • By Anthony Marceau
      Hi everyone! I have a 1986 yamaha moto4 200 that's been sitting for a while! Cleaned the carb, replaced engine oil, put fresh gas in it. Got it running and went for a ride! It was running great just a little backfire once in a while! I barely made it home on the way back and now the bike won't run at all since then! It will start if I give a little bit of throttle but dies instantly as soon as I let go off the throttle! And even if I try to rev it up it'll sound like its not getting enough gas.. it revs up a couple hundred rpm's and backfires through the carb.. it almost sounds as if I was trying to take off from zero in 5th gear! Nothing is seized though! I dissasembled the head and the piston and cylinder are fine! Rebuilt the carb, replaced the ignition source coil.. I don't know what to do anymore.. compression test shows 90 psi Specs are 128 psi but i'm not sure if I trust my compression tester.. any ideas? Thanks!!
    • By sloundez
      Does anyone out there know where I can get a functional pair of wheel cylinders for subject ATV? Any suggestions welcomed. Thanks
    • By chuckcnm
      Hi, just picked up a MOTO 4 YFM255 and want to replace the rear brake pads. How do I get to the back. Guessing I need to remove the brake disk, question any easy way to do this?
      Thanks
    • By pizzaman_288
      How hard is it to change the outer seals on the rear differential mine are leaking fluid and I have no idea on how to change them out any help would be great thanks
    • By mmgood
      Just bought a 1987 bayou 185 frame and body great shape but have to rebuild motor does any one here have a manual for a 1987 kawasaki bayou 185 ? if you you do please let me know.
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...