Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

superdude811

1994 Suzuki King Quad Carb Rebuild Kit Question

Recommended Posts

im looking for a carb rebuild kit for my 1994 king quad. i found rebuilt kits from 1991-1998 except 1994! can i use a 95 kit or a 93 kit? are the carbs the same?

IMG-20120529-00073.jpg

IMG-20120529-00073.jpg.79480826ded2b4733adf94e7b23e283c.jpg

Share this post


Link to post
Share on other sites


Have you checked sites like bikebandit.com and looked in their OEM section? See if the part numbers are the same for the carb...between years.

* Added full year, make, model, and issue to thread title for better searches.

Share this post


Link to post
Share on other sites

All 91-98 LTF-4wd use basically the same Mikuni BST31SS carb. See:

CARBURETOR REBUILD KIT: SUZUKI LT-F4WD

Why do you need a kit? I've never replaced a part on either of my old Suzuki's carbs.

The 91 has over 6000 miles and was a wreck when I bought it. Taking the carb off and just cleaning the fuel bowl area seems to cure most problem. To prevent future problems

install a 1/4" inline fuel filter. I got one off ebay for under $2

Share this post


Link to post
Share on other sites

ok thanks, and my dad recommended i do a kit, but i just pulled it apart again yesterday and found it very clean. i soaked it in marine cleaner(my local hitching post recommended i do it) and when i was done it looked brand new! i also soaked some screws and things in it to clean them up too! it worked great! im going to put it back together and try that.

also when taking it apart i found my fuel mixture screw was VERY far out, im guessing that had a huge effect...

question tho, will the fuel filter mess up the fuel pressure?

Share this post


Link to post
Share on other sites


The fuel filter will cause no problems. I bought my 1993 Suzuki LTF-4wd new and the dealer had installed one. I didn't even know it was there until it plugged up and needed replacing 19 years later.

This is the one I bought, it is identical to the one it replaced, sorry I was wrong on the price, they are $4.75 :

1/4" Fuel Filter Visu Filter Made in the USA CR 125 250 ATV GO Kart Motorcycle | eBay

Just cut the line on top where it passes under the seat and plug it in. No clamps needed because the pressure is so low. Note the directional arrow on the filter.

Edited by catcandu
forgot something

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Shane Pillar
      Talk about what kind of atv you have and what you do with it.
    • By Wes Camp
      So I bought an 88 qaudracer real nice bike fired up 2-3 kick everytime. When I bought it the brake calipers were not on the bike the guy gave them to me In a box with parts to rebuild. So I HAVnt ever really rode the bike except a quick run testing gears when I bought and I started it and drove in yard not getting out of 3rd due to no brakes. I put it in garage turned it off. The following weekend I put brakes on and go to kick it and it’s seized. I did put it in high gear and rocked it back and forth and got it to kick a couple times. But has seized back up. Any ideas??? Could it be a kicker malfunction??
    • By John Ford
      i ordered a keihin carb for my 07 trx 90 and it fits nicely but the new cable they sent is way too long and i can't make it work.  the old honda cable cap [that fits on top of the carb] is too small to fit.  the keihin cap is approx 3/4 or 19mm.  honda cap is more like 1/2 in.  the keihin has a rubber boot on the cap where the throttle cable goes through . i don't know how to find the right length [most cites don't give the length].  i'm not sure how cables fit into that boot  and do i need to add the length of the boot to the cable?  the old honda cable is 28 inches total, but the cable movement is only approx 2'' which would not be enough to reach the actuator block on the keihin.  looking to find a throttle cable compatible with the keihin.  any help, please.
       
       
    • By JacobSlabach
      got 7 atvs off CL recently for a good price.  one of which is a yamaha warrior.  anyone know where the vin is printed on this bike?  Haha good place to start as I do not know year or size yet.  The former owner says needs exhaust ans and clutch work.  he said it ran fine until the clutch cable broke and then I couldn't get the new cable adjusted right and it would grind gears.  things I see:  clutch cable locked up again, no brakes, carb leaking (green with algae around the bowl and has gelled gas stalagtights on it), aftermarket exhaust melted the airbox so I need something different and a new air box.  I would like the use the current exhaust if I can but I have a feeling its a redneck fix as it looks like there is an ace bandage holding it to the exhaust pipe (its an aftermarket slip-on exhaust), so I'm not sure about that- lets get the bike running first.  also, battery (looks brand new, what a shame) is dead, 0 volts.  Otherwise, bike looks to have not been wrecked, and plastics are ok (it sat outside under a 'tarp' for 3+ years since it was run last).  any tips and advise on where to start first would be awesome as this is my first clutched bike (manual).
      the clutch is my main concern- I've never rode a clutched bike so I dont even know what its supposed to feel like.  lol I'm spoiled on my automatic polaris 
    • By Squirrel
      So I bought a Bayou 220 as me 'Black Friday' score, and was informed it has carb issues.. 
      A little history from the previous owner: they suspected the carb was bad as it was 'running like crap' so they did a rebuid kit on it. Didn't fix issue so they took it to a shop where the tech installed an aftermarket(?) carb, but had to modify the throttle cable to get it to work. Quad ran great at 1/4 throttle, but anything above that and the throttle would stick and the machine would run like garbage again.
      What I know and think: I hear carb issues are common and fairly easy to fix. Also, I think they used the 'universal' rebuild kit that claims '88-'11, but the jets and such were different from '00-'03 (gaskets, etc. appear to be the same) so their original attempt was a good idea, just not good enough.
      They did give me the original carburetor with the 4-wheeler, but it has the wrong internals. I'm thinking if I can get the right jets, springs, etc for the rebuild, I should be able to get this thing running right. Of course, I still need to charge the battery back up, change all the fluids, replace fuel lines, plug and wire.. ya know, the basics for a machine that's been sitting for roughly 9 months. lol
  • Similar Tagged Content

    • By Paul Maple
      I have a 1999 Sportsman  500, it was running fine, than started to lose power in the winter, I adjusted the idle screw and away I went, than a few weeks ago it died, I have found that i am flooding the engine, compression was at 70PSI and due to the compression release mech. i assume i am good as it compared to the same PSI on a 2000 sportsman 500 i have. i cannot start the atv unless i go full throttle and it starts an runs for about 30 sec than dies, again it is flooded. i ordered a new carb off ebay as i could get one for around $40. put that in same issue, i have checked the timing, (good), valves out of adjustment i adjusted to .006 still same issue, i have found the exhaust lobe and rocker arm to have some wear, i have ordered new ones, but am looking for any other input in this area as well. would the exhaust cam and rocker arm cause the engine to flood? i have used a bore scope and the piston liner has good cross hatching still? any input would be great.
    • By Tubecatgs
      A friend of mine has this Bayou 220 that started running bad and parked it a few years ago. I foolishly volunteered to take a look at it. I noticed right away the choke plunger on the carb was broken and probably the reason it was running bad but now the old gas was evaporated and like turpentine. Before i even tried to start it, i drained/ thoroughly washed the tank out, new fuel filter, new fuel lines. Blew air through the petcock etc. Changed the oil and filter and air filter and new choke plunger and cable. I disassembled the carb and rebuilt it with a kit. I cleaned the main jet with solvent and poked a wire through it to make sure it is clean.. the engine now fires right up with the choke on and dies when i take the choke off. I adjusted the air/fuel screw to about 1.5 turns out and the idle screw about 2.5 turns out. The rubber boot between the carb and head does not have any cracks in it so I don't think it is leaking air. I originally had the clip on the needle on the second from the top ring... when i moved it all the way to the bottom it starts, runs and idles really fast and will idle eeally high with the choke off but if i adjust the throttle cable and/or idle screw to a slower idle it will sometimes stall but the idle will go up and down every few seconds and when you give it gas there is a hesitation... i tried moving the clip down to rhe second from bottom and same problem... i replaced all the parts in the pic to the top right. However, there appears to be a small o ring, washer and spring left over from the kit... i did not see these get removed..... a) any idea if where these extra parts go and if i need them and b) any other ideas on why i cant get it to idle right or carb adjustment ideas?
      Thanks
    • Guest huntingstill
      By Guest huntingstill
      k I would like to take my one person off road go cart and turn it into a sand rail LIFT it new engine and transmission make it so you have to shift w/ a clutch and all the fun stuff a car has
    • By bradley nelson
      What is the best and easiest way to tune your carburetor? Any tips or tricks?
    • By LTZ-Zach
      So i was riding the other day and my quad randomly shut off. It started back up and ran completely fine for a little while and then it started idling terribly.
      I cleaned the carb and changed all the jets and everything except the float due to the rebuild kit not coming with one and it actually runs worse then it did before.
      It will run and idle decent now but when I give it gas it dies.
      Does anybody know what could be wrong?
      I also changed the spark plug and air filter along with the oil and oil filter.
       
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...