Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

joewilly

Suzuki King Quad - Electrical Problem

Recommended Posts

I was using my winch after quad was started and running and my quad shut down. dealer installed winch. never had a problem before. battery is good and found the main power 10 amp fuse blown. replaced. now have lights....but nothing showing on display console and quad is dead. wont start or even turn over..am i missing something???

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Tim Orr
      Installed new battery was told that’s what was wrong when hit start button I hear 1 click then nothing?  Can the battery just not have enough amps to crank the starter the first time ? I trickle charged it overnight thought it was enough!
    • By DUBLT
      Looking to purchase a windshield for my ATV, suggestions of what to buy with quality in mind and will fit without doing any modifications. 
    • By Kaj Colum
      Have a Bayou 400. sometimes when I press the start button i hear the solenoid click but the starter does not engage. Here is the strange thing though, when that happens if I kick the kick start just once then press the start button starter engages normally. Any ideas?
       
    • By Ted Aregi
      I've got a king quad 750cc has anyone converted the fuel pump relay to a stronger fuel pump relay on there king quad?
    • By josephnbl91
      My four wheeler when i first got it seemed like it was very slow when i first got it and it had no throttle response so i replaced the belt and cleaned all of the rollers thinking that would solve the problem from what i read on the forums. well it turned out that it wasnt. so i went to the next thing i took out the injector to check it out and i seen that there was a tiny bit of debree in it so i cleaned it and it seemed to improve a little bit. but still did not solve the problem. i later found out how to find the trouble codes out from the lcd screen using a paper clip on the diagnostic port and it showed the code which stood for no codes C00. i also forgot to mention that the throttle position censor is working perfect. before i started all of this the four wheeler ran just not to its potential. after my friend and i did the trouble code test the bike wouldnt even start anymore and the injector would spray for a few seconds for the start up then it stops and the fuel injection light comes on and blinks. the four wheeler wouldnt start anymore. i took it over to the local shop and they hooked it up to the computer to see if there was any codes and it still showed it was free of codes. they hooked it up to the fuel pressure gauge and we found that it was making 22 pounds and it should be making around 43. i then bought a new fuel pump and put it in. it now starts and runs for a few seconds and then it stalls out and the fuel injection light comes on again. which then leads me to think it is the ecu now but i want to be sure before i invest around $500 more into it. any opinions on whether or not anyone thinks this is the problem or if they have had a similar problem before would be really appreciated. sorry for writing a novel and not spelling very well. also i forgot to put the year in the title it is a 2007
  • Similar Tagged Content

    • By patricknperkins
      Ok, so got this thing, assembled, and even added acid/assembled the battery with a solid trickle charge and the battery is fine.
      As far as I can tell, I have checked all the fuses I can find, but I have ZERO power to anything. Even the console will not light up when turned to ON.
      Is there some sort of hidden parental/child disconnect or safety switch that I'm not aware of? ANY help would be appreciated.
    • By Jesper
      Hi guys
      Does anyone have a link to a service manual for the 2008 KingQuad fs 400 4x4.
      I would be very happy to get my hands on a file
      Thanks. :-)
    • By deadrider
      I have a kq 450 4x4 that I an have a problem with.the bike does not want to move.i am not very familiar with the sheave or clutch that it has on it.my buddy who owned it beat on it prolly never maintained it just so that's out there. The belt is fairly new primary and secondary clutchs are pretty ruff looking the rollers are toast I think but idk. Everything moves fine except for the primary it moves but does not push in to move the belt only at a high rpm will it move sometimes any clue on what it could be other then going out to spend 6 or 7 hundred on a whole new assembly of the clutchs
    • By biggreen2010
      ok it will start up an run but quits a lot till it gets warm, but has a bad miss an wont idle, I have a brand new Honda carb on it, good gas flow, new plug, but when I let the throttle go below a quarter, it backfires through carb an tail pipe:confused: so it has never had any electrical work or mechanical work done...it just started all the sudden, I'm think it may have ignition coil breaking down, or cdi box going bad...anyone had this trouble before? let me know what you did to fix it. thanks:skeptic:
    • By Flyman
      Good morning all I am new to the forum and new to the world of ATVs. I recently purchased a 99 big bear 350 4x4 that has a few issues to be resolved. it started with the push button starter it would just click when the button was pushed to date I have replaced the solenoid with a Napa 4 wire setup (not sure if this is installed correctly) and replaced the older baterry with a AGM battery. after all of that it still clicks but the source of the click is a white plastic rectangular box with 2 wires going into it. i have 12.8 volts to the first post of the solenoid and nothing on the second post when the button is pushed. when the solenoid is jumped the starter engages. lastly i have no lights when the buggy is not running and when i hit the light switch there is also a click that happens. Thanks for any info anyone can provide I greatly appreciate the help.
      Flyman
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...